RP-11, Highly Sensitive Scintillation Detector for Gamma Radiation

Item number: BAK-2170

  • Externalprobe for ROTEMradiation meter RAM R-200
  • Probe for detection of gamma radiation
  • Countrate measuring range: 0-50,000cps
  • Highly efficient, hermetically sealed 2" NaI scintillator
  • Rugged, splash-proof housing

Category: Radioactivity

5.786,97 €

including19% VAT.

Exp. shipping time: ca. 6 weeks

: 0 workdays



RP-11, Highly Sensitive Scintillation Detector for Gamma Radiation

The RP-11 is a very sensitive scintillation probe for detection of gamma radiation.
It is an external probe for a ROTEM radiation meter RAM R-200.
The combination of the RAMR-200 monitor and the PM-11 probe permits highly efficient surface contamination detection.
The RP-11 contains a highly efficient, hermetically sealed, NaI(Tl) scintillator, 2″ diameter and 2″ thick, coupled to a 2″ photomultiplier tube. This is encased in a rugged, splash proof housing for protection against shock, vibration and humidity.
The detector communicates using a RS-232 protocol and can be connected directly to a Computer for calibrating or downloading data.
Technical data:
Count rate measuring range: 0- 50,000cps
Radiation detected: Gamma above 50keV
Scintillator: NaI (TI) , 2", 2" thick
Sensitive window area. 20cm
Sensitivity: 20,000cps/mR/h (137Cs)
Energy calibration: Software calibrated single channel analyser (SCA).
Temperature range: -30C to +60C (-200F to +140F)
Humidity range: 10% to 95% RH (non condensing)
Dimensions: 50mm x 340mm (2.75" x 13.4")
Weight: 1.75kg (3.9lbs)
Casing: Aluminium, thickness: 1mm (0.04"), splash-proof, IP65
Output signals: RS-232 or RS-485 and TTL pulses

Ratings (0)

Average product review

Write your first review and help others with their purchase decision: