TGRF-4600, Tinytag Plus Radio Data Logger with External Temperature/Humidity Probe

SKU: TGRF-4600
Category: Air Humidity
Manufacturers: Tinytag / Gemini

replacement for Tinytag Plus Radio TGRF-4500

2 channels for temperature and relative humidity (RH)

measuring ranges: -25 to +85°C and 0 - 100% RH

Logging intervals from 2 minutes to 10 days

Local cache of 2 weeks readings

Rugged IP67 case

Typical range of 200m (line of sight)

Radio licence-free frequency

514,08 €

incl. 19% VAT

Exp. shipping time: ca. 2 weeks
: 7 Workdays (Other countries)

pc.

Description
Reviews

TGRF-4600, Tinytag Plus Radio Data Logger with External Temperature/Humidity Probe

Housed in a rugged waterproof (IP67) case, this self-contained radio logger unit monitors a temperature channel and a humidity channel simultaneously.
The supplied coated temperature/humidity sensor offers good resistance to moisture and condensation.
The probe can be inserted into hard to reach areas, such as air conditioning vents and wall cavities.

Typical applications:

Warehouses and storage
Air conditioning
Laboratories
Building performance and evaluation

This data logger is suitable for outdoor, industrial and warehousing applications.
The unit will typically run for 12 months on its 2 AA alkaline batteries. (The 12 months operation is quoted for a typical 10 minute logging interval in a network with max. 25 radio loggers and at max. 25°C operational temperature.)
If required the unit can also be powered by an optional mains power supply.

The unit is able to transmit logged data to another logger or a receiver or to store data locally in the event of radio contact being temporarily lost.

The data logger has got a status LED:
+ LED off: logger is off
+ green every 4 sec.: everything is o. k.
+ red every 4 sec.: not meshed or battery low or alarm indication

The external temperature/humidity probe PBRF-8002 and the sensor extension cable CAB-0034 are supplied with the logger.

Please note: This article is only one component of the Tinytag Radio Logger System.
For proper operation minimum one radio data logger and one Tinytag radio receiver with accompanying software are necessary!

Features

2 channels for temperature and relative humidity (RH)
-25 to +85°C and 0 - 100% RH
Logging intervals from 2 minutes to 10 days
Local cache of 2 weeks readings (10min interval)
IP67 case
User replaceable alkaline battery
Typical range of 200m (line of sight)
Radio licence-free frequency: 869.88 MHz (EU version)
Self-configuring and easy to set up
Self-contained and battery powered
Low battery warning
User-replaceable batteries
Fast access to information
Remote alarm signalling via e-mail
SMS messaging supported
Cost efficient

Technical Data:
Reading range temperature: -25°C to +85°C
Sensor type: 10K NTC thermistor (external, supplied probe)
Logger resolution: 0.01°C or better
Response time: 5 mins to 90% of the reading change (in moved air)

Reading range humidity: 0 - 100% RH
Resolution: 0.04%
Accuracy: ±3%
Response time: 90s to 90% FSD in moved air
Stability: better than 1% per year (typical)

Radio frequency: 869.88MHz (EU version)
Radio power: <5mW
Radio range: 200m, typical (line of sight).
Radio licence: no licence required
Memory type: non volatile
Logging interval: 2 minutes to 10 days
Offline capacity: one week, at a typical 10 minute logging interval
Alarms: 2 programmable latching alarms (upper and lower) per channel
Low battery monitor: software warning
IP rating: IP67 water-proof (not valid for the sensor)
Operational range: -20°C to +60°C
Case Dimensions: 241 x 155 x 62mm³ (h x w x d, including aerial)
Weight: 554g (including aerial)

This device is also available upon request as versions for Australia.

Supplied temperature/humidity probe:
IP rating: IP20
Operational range: -25°C to +85°C
Probe dimensions: Length (without cable) 78mm
max. diameter: 16mm
Cable length: 1.5m
Weight: 76g

Optional accessory:
ACSRF-4030-PK Tinytag Radio Plus receiver with the Radio Explorer software

There are no reviews yet.