Best sellers
SKU:
GS125L-2-1-00
  • universal input for industry standard signals, Pt100, thermocouple and potentiometer
  • 2 relay outputs
  • 4-20mA output
  • adjustable min/max contact function 
  • 2-colour illuminated  scales for limit value adjustment
  • monitoring of sensor break and short-circuit with Pt100 sensors
  • auxiliary voltage 24VDC
  • functional safety up to SIL2
  • housing width only 12.5mm
  • removable coded terminals
  • carrier rail mounting TS35 EN60715
  • safe galvanic isolation between input/output and auxiliary voltage
235,62 € *
  • : 11 - 13 Workdays  (DE - int. shipments may differ)
Best sellers
SKU:
MB1-33RVOff
Item weight:
0,09 kg
  • 30 segments bargraph display
  • vertical front panel mounting, 24 x 96mm 
  • segment colour: red/green selectable, optionally blue/red, orange/green  
  • small mounting depth: 60mm without the pluggable screw terminal
  • parametrization via HEX switch and  push button 
  • factory preadjusted input for standard signal 0 to 10V and 0/4 to 20mA 
  • free adjustment at the input signal possible 
  • 8 different types of presentation, parametrizable as bar, dot/point or curtain  
  • free direction selection and central display (for example, beams out of the centre) 
  • stepwise brightness control 
  • protection rate IP65 on the front
  • plug-in screw terminal
Best sellers
SKU:
STL50-5-1R-5
Shipping weight:
0,55 kg
Item weight:
0,50 kg
  • Useful as temperature limiter/-guard and exhaust gas temperature limiter
  • Input for double thermocouples type J, K, N and S 
  • Auxiliary voltage: 24VDC
  • Alarm output: 1 relay SPDT
  • Programming via backlit LCD graphic display
  • Certified according to DIN EN 14597 SIL 2
  • 727,09 € *
    • : 11 - 13 Workdays  (DE - int. shipments may differ)
    SKU:
    AF500ff
    Variations in:
    • Supply Voltage
  • output frequency form 0...0.01Hz/20kHz programmable
  • inputs for 0/4...20mA, 0/2...10VDC
  • teach-in programming for analog start and end value
  • outputs transistor and relay SPDT
  • power and programming indicator via 2-colour LED
  • SKU:
    MB-3ff
    Variations in:
    • Mounting/auxiliary voltage
  • combo panel meter for 0-300VDC and 0-1ADC
  • red 3-digit digital display -199...999 digits (optional green display)
  • 30-points-bargraph tricolour
  • adjustable bargraph or dot operation or operation with permanent display of the midpoint
  • installation depth: 120 mm without plug-in screw terminal
  • version with multi voltage power supply: 100-240VAC/DC,
  • verison for low voltage supply: 10-40VDC /18-30VAC
  • display adjustment via factory setting or directly via sensor signal
  • min/max-memory with adjustable permanent display
  • 30 additional adjustable supporting points
  • display flashing at threshold value exceedance/undercut
  • zero key for the triggering of Hold, Tara, display change, setpoint setting, alarm actuation
  • flexible alarm system with adjustable delay times
  • volume metering (Totaliser)
  • mathematic functions like reciprocal value, root extraction, squaring and rounding
  • sliding averaging
  • programming interlock via access code
  • protection class IP65 at the front
  • plug-in screw terminal
  • SKU:
    CVT500-1/5-125/250ff
    Variations in:
    • Supply Voltage
  • Measuring input for DC and sinusoidal AC signals
  • Arithmetic average value measurement RMS calibrated
  • Frequency range 40...200Hz
  • SKU:
    FT500ff
    Variations in:
    • Supply Voltage
  • Frequency ranges from 0...0.01Hz/20kHz programmable
  • Start and end value of the measuring range programmable
  • Multipurpose inputs for 24V sensors, switching contacts and Namur actors
  • Integrated transmitter supply
  • Best sellers
    SKU:
    GMUD MP-ff
    Variations in:
    • Measuring Range:
    Item weight:
    0,28 kg
  • freely scalable
  • selectable 4-20mA / 0-10V
  • with display
  • switching output
  • SKU:
    GMUD MP-F-MBF
  • freely scalable
  • output switcheable 4-20mA / 0-10V
  • with display
  • switching output
  • SKU:
    GMUD MP-S-MBS
  • freely scalable
  • output switcheable 4-20mA / 0-10V
  • with display
  • switching output
  • 343,91 € *
    • : 11 - 13 Workdays  (DE - int. shipments may differ)
    SKU:
    GODOX-200-PS
  • Low-maintenance & robust 
  • Two 4-20mA (or 0-5V) outputs for concentration and saturation
  • Fully pressure and temperature compensated
  • Calibration in many applications once per year! 
  • No flow required
  • 1.867,11 € *
    • : 11 - 13 Workdays  (DE - int. shipments may differ)
    SKU:
    GODOX-200-ST
  • Low-maintenance & robust 
  • Two 4-20mA (or 0-5V) outputs for concentration and saturation
  • Fully pressure and temperature compensated
  • Calibration in many applications once per year! 
  • No flow required
  • SKU:
    GPHU014MP-BNC_ff
    Variations in:
    • Analog Output
    • measuring range: 0.00 - 14.00pH
    • LCD display
    • automatic and manual temperature compensation
    • external Pt1000 temperature probe connectable
    • BNC socket for sensor connection
    • sensor input electrically isolated
    • 2-point calibration
    • analogue output: 4-20mA or 0-10V
    Best sellers
    SKU:
    GS125L-1-0-00
    • universal input for industry standard signals, Pt100, thermocouple and potentiometer
    • 2 relay outputs
    • 4-20mA output
    • adjustable min/max contact function 
    • 2-colour illuminated  scales for limit value adjustment
    • monitoring of sensor break and short-circuit with Pt100 sensors
    • auxiliary voltage 24VDC
    • functional safety up to SIL2
    • housing width only 12.5mm
    • removable coded terminals
    • carrier rail mounting TS35 EN60715
    • safe galvanic isolation between input/output and auxiliary voltage
    159,46 € *
    • : 11 - 13 Workdays  (DE - int. shipments may differ)
    SKU:
    GS125M-1-1-00
  • universal input for industry standard signals, Pt100, thermocouple and potentiometer
  • 1 relay output
  • adjustable min/max contact function 
  • 2-colour illuminated  scales for limit value adjustment
  • monitoring of sensor break and short-circuit with Pt100 sensors
  • wide-range mains adaptor
  • functional safety up to SIL2
  • housing width only 12.5mm
  • removable coded terminals
  • carrier rail mounting TS35 EN60715
  • safe galvanic isolation between input/output and auxiliary voltage
  • SKU:
    GRHUff
    Variations in:
    • Variant:
  • measuring range: 0.0 ... 100.0% RH
  • with/without on-site display
  • output ranges freely scalable
  • adjustment by operator possible
  • available output signals: 4-20 mA, 0-1 V or 0-10 V
  • SKU:
    GRMU2000MP/BNC
  • measuring range: -2000 to +2000mV
  • accuracy: 0.2% FS
  • output signal: 4-20mA
  • electrode socket: BNC
  • SKU:
    GT10-CO2-1R
  • Measuring range: 0-2000 ppm CO2
  • Measuring principle: infrared principle (NDIR)
  • Accuracy: ±50 ppm ±2 % of meas. value
  • Output signal: 4 - 20 mA (3-wire)
  • Auxiliary energy: 12 ... 30 V DC, max. 600 mA
  • 655,69 € *
    • : 11 - 13 Workdays  (DE - int. shipments may differ)
    SKU:
    IW1000
    Variations in:
    • Supply Voltage
    • Time-optimized pulse measurement method
    • 2 switching outputs, 1 analogue output for optional external pointer instrument 
    • Automatic and manual self-test
    • Acoustic alarm in the event of a device failure
    • Optional versions for rail vehicles and medical technology available
    SKU:
    MB1-33RHOff
    Variations in:
    • Supply Voltage
    Item weight:
    0,09 kg
    • 30 segments bargraph display
    • horizontal front panel mounting, 24 x 96mm 
    • segment colour: red/green selectable, optionally blue/red, orange/green 
    • small mounting depth: 60mm without the pluggable screw terminal
    • parametrization via HEX switch and  push button 
    • factory preadjusted input for standard signal 0 to 10V and 0/4 to 20mA 
    • free adjustment at the input signal possible 
    • 8 different types of presentation, parametrizable as bar, dot/point or curtain  
    • free direction selection and central display (for example, beams out of the centre) 
    • stepwise brightness control 
    • protection rate IP65 on the front
    • plug-in screw terminal
    SKU:
    LLM3ff
    Variations in:
    • Variant
  • Indication of the presence of the three phase voltages towards neutral wire
  • Display voltage range: 3 x 230 ... 400VAC
  • DIN rail mounting for the installation in the control cabinet
  • External optional indication for the control cabinet door
  • 3 years warranty
  • SKU:
    MH-1Uff
    Variations in:
    • Auxiliary voltage
  • Transducer with universal input and analogue output
  • red LED display from -199...999 digits
  • digit height ca. 7 mm
  • min/max value recording
  • 9 adjustable supporting points
  • display flashing at treshold value exceedance / undercut
  • Tara function
  • programming interlock via access code
  • pluggable screw-terminal
  • further optional functions upon surcharge
  • SKU:
    MR50ff
    Variations in:
    • Auxiliary Voltage /Number of Outputs
    • Standard Signal Input: 0/4...20mA, 0/2...10VDC
    • Programmable measuring range
    • 2 or 4 Relay alarm outputs
    SKU:
    MU500-51ff
    Variations in:
    • Power Supply:
  • Electrically isolated: between input / output / supply voltage
  • 2 power-supply-designs with wide range of allowed supply voltage
  • 22.5 mm standard case for rail mounting TS35
  • 13 measuring ranges, selectable via rotary switch at front panel
  • Offset and span adjustable
  • SKU:
    MU500-53ff
    Variations in:
    • Supply Voltage:
  • Electrically isolated: between input / output / supply voltage
  • 2 power-supply-designs with wide range of allowed supply voltage
  • 22.5 mm standard case for rail mounting TS35
  • 16 measuring ranges, selectable via rotary switch at front panel
  • Offset and span adjustable
  • SKU:
    MU500-Ex-51-ff
    Variations in:
    • Supply Voltage:
    Item weight:
    0,26 kg
  • Electrically isolated: between input / output / supply voltage
  • 2 power-supply-designs with wide range of allowed supply voltage
  • 22.5 mm standard case for rail mounting TS35
  • 13 measuring ranges, selectable via rotary switch at front panel
  • Offset and span adjustable
  • Input intrinsically safe ATEX II (1) G [Ex ia] IIC, II (1) D [Ex iaD]
  • SKU:
    MU500-Ex-53-ff
    Variations in:
    • Supply Voltage:
  • Electrically isolated: between input / output / supply voltage
  • 2 power-supply-designs with wide range of allowed supply voltage
  • 22.5 mm standard case for rail mounting TS35
  • 16 measuring ranges, selectable via rotary switch at front panel
  • Offset and span adjustable
  • Input intrinsically safe ATEX II (1) G [Ex ia] IIC, II (1) D [Ex iaD]
  • SKU:
    N21-00M0
    • Panel mounting
    • Universal input (measurement of temperature and standard signals)
    • New range for DC voltage measurements: ±75mV
    • Relay alarm output
    • Universal power supply from 24 to 230VAC/DC
    • Supply output for external transducers: 24VDC
    • OLED graphic display, horizontally or vertically configurable
    • Configuration of the meter via mini USB interface via the free eCon software
    141,88 € *
    • : 11 - 13 Workdays  (DE - int. shipments may differ)
    SKU:
    P30Off
    Variations in:
    • Variant
    • 2 universal measuring inputs for sensors with pulse outputs
    • Input, output signals and power supply galvanically isolated
    • Output standard: 0/4-20mA
    • Relay output
    • 24VDC output for ext. sensor
    • Supply voltage: 85-253VDC/AC
    SKU:
    P30Uff
    Variations in:
    • Variant
    • Universal measuring input, programmable
    • Input,  output signals and power supply galvanically isolated
    • Internal data memory for 534.336 samples
    • Output standard signal variants: 0/4-20mA
    • 2 Relay outputs
    • Supply voltage: 85-253VDC/85-300VDC
    SKU:
    P2790
  • two test modes: rotate speed mode & count mode
  • wide measure range and high resolution
  • high visible digital LCD and backlight display
  • built-in memory recalls MAX / MIN and last value stored
  • low battery indication / auto-range
  • 99,96 € *
    • : 6 - 8 Workdays  (DE - int. shipments may differ)
    SKU:
    P2795
  • measurement type: rotation speed, total revolutions,frequency, surface speed  and length 
  • wide measure range and high resolution
  • 40 reading memories: MAX, MIN, AVG, DATA
  • laser targeting (class II laser; < 1 mW)
  • 95,08 € *
    • : 6 - 8 Workdays  (DE - int. shipments may differ)
    SKU:
    PH40-2-2-00
    • Measuring range: -1 to +15 pH
    • Head transmitter for measuring chains with S7/S8 connector
    • Output: 4-20mA = -1 to +15 pH
    • Zero point: pH 7,0
    • Slope: 59.2 mV/pH, uncompensated
    309,40 € *
    • : 11 - 13 Workdays  (DE - int. shipments may differ)
    SKU:
    STL4896ff
    Variations in:
    • Sensor/Auxiliary Voltage
  • Useable as Temperature Limiter/-Guard and Exhaust gas Temperature Limiter 
  • Certified according to DIN EN 14597 SIL2
  • Inputs RTD Pt100 or double-thermocouple
  • Limit value and switching hysteresis programmable
  • Basic accuracy < 0.5%, ± 2 digits
  • Reaction time < = 0.5s
  • 1 Relay for safety-relevant temperature limit, forcibly guided
  • 1 Relay for pre-alarm
  • Analogue output 0/4... 20mA; 0/2... 10VDC
  • Memory function for error message
  • Operator lock (password protection)
  • Contact input for external reset
  • 24VDC signal for external alarm message
  • Front panel mounting, 45mm x 92mm
  • Best sellers
    SKU:
    ST500 Ex-10-0
    Item weight:
    0,12 kg
  • Input intrinsically safe ATEX II (1) G [Ex ia] IIC, II (1) D [Ex iaD]
  • 2 power-supply-designs with wide range of allowed supply voltage:
  • 10 ... 30VDC / AC oder 85 ... 253VAC
  • Electrically isolated: between input / output / supply voltage
  • 22.5 mm standard case for rail mounting TS35
  • Universal inputs/outputs for (0)4 ... 20mA and 0(2) ... 10V
  • 347,48 € *
    • : 11 - 13 Workdays  (DE - int. shipments may differ)
    Best sellers
    SKU:
    ST500Ex-10-5
    Item weight:
    0,12 kg
    Input intrinsically safe ATEX II (1) G [Ex ia] IIC, II (1) D [Ex iaD] 2 power-supply-designs with wide range of allowed supply voltage: 10 ... 30 V DC / AC oder 85 ... 253 V AC Electrically isolated: between input / output / supply voltage 22.5 mm standard case for rail mounting TS35 Universal inputs/outputs for (0)4 ... 20 mA and 0(2) ... 10 V
    347,48 € *
    • : 11 - 13 Workdays  (DE - int. shipments may differ)
    Best sellers
    SKU:
    STL50-1-1R-0
    Item weight:
    0,49 kg
  • Useful as temperature limiter/-guard and exhaust gas temperature limiter
  • Input for RTD Pt100 sensor
  • Auxiliary voltage: 230VAC
  • Alarm output: 1 relay SPDT
  • Programming via backlit LCD graphic display
  • Certified according to DIN EN 14597 SIL 2
  • 635,46 € *
    • : 11 - 13 Workdays  (DE - int. shipments may differ)
    SKU:
    STL50-1-1R-5
  • Useful as temperature limiter/-guard and exhaust gas temperature limiter
  • Input for RTD Pt100 sensor
  • Auxiliary voltage: 24VDC
  • Alarm output: 1 relay SPDT
  • Programming via backlit LCD graphic display
  • Certified according to DIN EN 14597 SIL 2
  • 727,09 € *
    • : 11 - 13 Workdays  (DE - int. shipments may differ)
    SKU:
    STL50-5-1R-0
  • Useful as temperature limiter/-guard and exhaust gas temperature limiter
  • Input for double thermocouples type J, K, N and S 
  • Auxiliary voltage: 230VAC
  • Alarm output: 1 relay SPDT
  • Programming via backlit LCD graphic display
  • Certified according to DIN EN 14597 SIL 2
  • 661,24 € *
    • : 11 - 13 Workdays  (DE - int. shipments may differ)
    SKU:
    STL50Ex-1-1R-0
  • Input Pt100, intrinsically safe ATEX II (1) G [EX ia] IIC/IIB or II (1) D [Ex iaD]
  • Useful as temperature limiter/guard and exhaust gas temperature limiter
  • Certified according to EN 14597 SIL 2
  • Auxiliary voltage: 230VAC
  • Alarm output: 1 relay; SPDT
  • Programming via backlit LCD graphic display
  • 886,55 € *
    • : 11 - 13 Workdays  (DE - int. shipments may differ)
    SKU:
    STL50Ex-1-1R-5
  • Input Pt100, intrinsically safe ATEX II (1) G [EX ia] IIC/IIB or II (1) D [Ex iaD]
  • Useful as temperature limiter/guard and exhaust gas temperature limiter
  • Certified according to EN 14597 SIL 2
  • Auxiliary voltage: 24VDC
  • Alarm output: 1 relay; SPDT
  • Programming via backlit LCD graphic display
  • 919,87 € *
    • : 11 - 13 Workdays  (DE - int. shipments may differ)
    SKU:
    STL50Ex-5-1R-0
  • Input double thermocouples, intrinsically safe ATEX II (1) G [EX ia] IIC/IIB or II (1) D [Ex iaD]
  • For certified thermocouples of types J, K, N and S
  • Useful as temperature limiter/guard and exhaust gas temperature limiter
  • Certified according to EN 14597 SIL 2
  • Auxiliary voltage: 230VAC
  • Alarm output: 1 relay; SPDT
  • Programming via backlit LCD graphic display
  • 873,46 € *
    • : 11 - 13 Workdays  (DE - int. shipments may differ)
    SKU:
    STL50Ex-5-1R-5
  • Input double thermocouples, intrinsically safe ATEX II (1) G [EX ia] IIC/IIB or II (1) D [Ex iaD]
  • For certified thermocouples of types J, K, N and S
  • Useful as temperature limiter/guard and exhaust gas temperature limiter
  • Certified according to EN 14597 SIL 2
  • Auxiliary voltage: 24VDC
  • Alarm output: 1 relay; SPDT
  • Programming via backlit LCD graphic display
  • 919,87 € *
    • : 11 - 13 Workdays  (DE - int. shipments may differ)
    SKU:
    TC500-60-ff
    Variations in:
    • Supply Voltage:
  • suitable for thermocouples type J, K and S
  • integrated cold-junction compensation ;
  • sutput signal switch selectable
  • SKU:
    MU125M
  • Universal input for Pt100, Pt1000, thermocouple, NTC and resistance measuring value
  • Configuration via front DIP switches
  • Analog actual value output 4-20mA
  • Zero point and limit value can be adjusted via trim potentiometers on the front
  • With Pt100 and Pt1000 sensors, monitoring of sensor break and short-circuit
  • Wide-range mains adapter: 20-125VDC snd 20-253VAC
  • Removable coded screw terminals
  • Housing width 12.5 mm
  • Carrier rail mounting TS35 EN60715
  • 188,02 € *
    • : 11 - 13 Workdays  (DE - int. shipments may differ)
    SKU:
    TB225
  • Can be used as a temperature limiter and monitor
  • Certified in accordance with DIN EN 14597
  • Pt100 inputs, dual thermocouple, input signals
  • 2 changeover relays
  • Configuration via backlit graphic display
  • 'White / Red' display colour change in the case of an alarm
  • Safe galvanic isolation between input / output / auxiliary voltage
  • Automatic recognition of the output signal
  • Wide-range mains adapter
  • Carrier rail mounting TS 35
  • 460,53 € *
    • : 11 - 13 Workdays  (DE - int. shipments may differ)
    SKU:
    TG50-3-2R-00-AO-5-00
    • Auxiliary voltage: 24VDC
    • Inputs Pt100/Pt1000, thermocouples type J, K, N, S
    • Plaintext supported programming by graphic display
    • 128 x 64 pixels LCD with white back-light
    • 2 alarm outputs, relay SPDT
    • Galvanic isolation between input/output/supply voltage
    SKU:
    TG50-3-2R-00-AO-5-11
    • Auxiliary voltage: 24VDC
    • Inputs Pt100/Pt1000, thermocouples type J, K, N, S
    • Option 11 is completely stored and preconfigurated accordingly
    • Plaintext supported programming by graphic display
    • 128 x 64 pixels LCD with white back-light
    • 2 alarm outputs, relay SPDT
    • Galvanic isolation between input/output/supply voltage
    SKU:
    TG50-3ff
    Variations in:
    • Analogue Output
  • Auxiliary voltage: 230VAC
  • Inputs Pt100/Pt1000, thermocouples type J, K, N, S
  • Measuring range programmable
  • Plaintext supported programming by graphic display
  • 128 x 64 pixels LCD with white back-light
  • 2 alarm outputs, relay SPDT
  • Galvanic isolation between input/output/supply voltage