GMUD MP-, Pressure Measuring Transducer

Item number: GMUD MP-ff

  • freely scalable
  • selectable4-20mA / 0-10V
  • with display
  • switching output
  • Category: Measuring Transducers

    Measuring Range:

    starting from 243,95 €

    including19% VAT.

    Exp. shipping time: ca. 1 week

    There are variations of this item. Please select the variation you wish.


    Description

    GMUD MP-, Pressure Measuring Transducer for Absolute, Over-/Under- and Difference Pressure

    Microprocessor controlled digital pressure transducer with display and operation via 3 buttons.
    With freely scalable analog output that can be toggled between 4-20mA and 0-10V.
    • freely scalable
    • output switcheable4-20mA / 0-10V
    • with display
    • switching output

    Area of application:
    +air and non-aggressive gases
    + controlling, measuring and monitoring
    +climate and ventilation
    +environmental and medical technology

    Types of pressure:
    Absolute pressure (vacuum used as reference) for measuring over pressure over absolute zero (sensor displaying barometric air pressure when coming into contact with atmospheric pressure).
    Relative pressure (reference atmosphere or ambient pressure) for over/under pressure measurements and pressure difference measurements (sensor displaying zero when coming into contact with atmospheric or ambient pressure).
    The above mentioned price is valid for the version GMUD-MP-S.
    Technical data:
    Sensor element: piezoresistive pressure sensor with integrated temperature compensation
    Relative fine pressure range: Measuring range Overload Burst pressure
    MP-F-MR0 0.000- 1.000 mbar rel. 150 mbar 200 mbar
    MP-F-MR1 0.00- 10.00 mbar rel. 150 mbar 200 mbar
    MP-F-MR2 0.00- 20.00 mbar rel. 150 mbar 200 mbar
    MP-F-MR3 -1.999...+2.500mbar rel. 250 mbar 500 mbar
    MP-F-MR4 -19,99...+20,00mbar rel. 150 mbar 200 mbar
    Optimized special ranges possible: see option - MBF (e.g. -15 ... +15 mbar)
    Relative pressure range: Measuring range Overload Burst pressure
    MP-S-MR0 0.0- 100.0 mbar rel. 1000 mbar 1500 mbar
    MP-S-MR1 0.0- 500.0 mbar rel. 1000 mbar 1500 mbar
    MP-S-MR2 0- 1000 mbar rel. 2000 mbar 3000 mbar
    MP-S-MR3 0- 2000 mbar rel. 4000 mbar 6000 mbar
    MP-S-MR4 0- 5000 mbar rel. 7000 mbar 7000 mbar
    MP-S-MR5 -100.0...+100.0mbar rel. 1000 mbar 1500 mbar
    MP-S-MR6 -500...+500 mbar rel. 1000 mbar 1500 mbar
    MP-S-MR7 -1000...+1000 mbar rel. 2000 mbar 3000 mbar
    Absolute pressure range: Measuring range Overload Burst pressure
    MP-S-MA0 0- 1100 mbar abs. 2000 mbar 3000 mbar
    MP-S-MA1 0- 2000 mbar abs. 4000 mbar 6000 mbar
    Optimized special ranges possible: see option - MBS (e.g. -350... +350 mbar)
    Please specify the desired standard measuring range when ordering!
    Typ. accuracy: GMUD MP-S: 0.15% FS (lin.),
    0.6% FS (hysteresis and temperature 0 ... 70C)
    GMUD MP-F: 0.35% FS (lin.),
    0.6% FS (hysteresis and temperature 0 ... 70C)
    Output signal: 4 ... 20mA / 0 ... 10V (selectable in menu)
    Auxiliary energy: only needed if 0...10V output signal is
    selected (18 ... 30VDC / 24VAC)
    Permissible burden: (4 ... 20mA): Ra[Ohm] = (Uv [V] - 12 [V]) / 0.02A
    Permissible load: (0 ... 10 V): = 3000 Ohm
    Operating temperature: -20 ... +70C
    Storage temperature: -40 ... +70C
    Display / operation: 4-digit 7-segment display and 3 buttons
    Pressure connection: universal pressure connecting pieces for 6 x 1mm or 8 x 1mm plastic tubes (4 or 6mm inner pipe diameter)
    Mounting position: any position (small influence of mounting position for low ranges)
    Housing: ABS (IP65), with fixing holes for wall mounting
    (accessible after cover has been removed)
    Electric connection: elbow-type plug acc. to EN 175301-803/A (IP65);
    max. wire cross section: 1.5mm2,
    wire/cable : 4.5mm to max. 7mm
    Options:
    LACK: card coated on both sides (for outdoor application)
    OUT: switching output (max 28V, 40mA), switches if meas. value falls below or exceeds limit value connection via 2nd elbow-type plug
    WE: default settings according to customer's specifications, includes: output signal, measuring range, default state in case of error (without upcharge if together with MBF / MBS)
    MBF: option any fine pressure range range < 25mbar
    please state desired measuring range
    MBS: option any pressure range range > 30mbar ...5000mbar
    please state desired measuring range

    Ratings (0)

    Average product review

    Write your first review and help others with their purchase decision: