Frequency Analog Transmitter FT500

Item number: FT500ff

  • Frequency ranges from 0...0.01Hz/20kHz programmable
  • Start and end value of the measuring range programmable
  • Multipurpose inputs for 24V sensors, switching contacts and Namur actors
  • Integrated transmitter supply
  • Category: Measuring Transducers

    Supply Voltage

    492,66 €

    including 19% VAT.

    Exp. shipping time: ca. 1-2 weeks

    There are variations of this item. Please select the variation you wish.


    Description

    Frequency Analog Transmitter FT500

    • Frequency ranges from 0...0.01Hz/20kHz programmable
    • Start and end value of the measuring range programmable
    • Multipurpose inputs for 24V sensors, switching contacts and Namur actors
    • Integrated transmitter supply

    This frequeny analog transmitter is used to convert an impulse frequency range into industry standard signals. The transmitter accepts impulses from a proximity switch, contact switch, light barriers and Namur proximity switches. Start and end value will be programmed via 5 rotary switches. The setting of intermediate values is done by trimmers on the front side. The device can also be set to falling characteristic and limit operation.

    This device is available in two versions regarding the supply voltage. Please select the required supply voltage when ordering.

    Technical data:

    Auxiliary energy
    Supply voltage: 85...265VAC or 10...30VAC/DC
    Frequency AC: 47...63Hz
    Power consumption: <4VA
    Operation temperature: -10...+60°C
    CE conformity: EN 55011, EN 60555, IEC 61000-4-4/5/11/13

    Measuring input
    Frequency range: 0...0.01Hz/20kHz
    Pulse cycle: pulse/pause: min. 20µs (contactless) or min. 5ms (contacts)
    Start value: programmable 0...+25%
    End value: programmable -15...+5%
    Pulse input (terminals 2, 3): low- signal -30V...+3V, 
                                              high- signal +10V...+35V
    Input resistance: Ri >10kOhm
    Encoder voltage (terminal 1): ca. 20VDC, short circuit current ca. 25mA
    Namur input  (terminals 4, 5): according to  DIN 19234, Namur
    Input resistance Ri: ca. 1kOhm

    Outputs
    Current: 0/4...20mA selectable,  burden < = 1kOhm
    Voltage: 0/2...10VDC
                 burden max. 10mA , short-circuit-proof  
                 (parallel with current output, 5mA)
    Basic accuracy: 0.1% of measuring end value
    Rise time (T90): <130ms

    Case
    Design: Polycarbonate, UL 94 V-0, TS35 according to DIN EN 60715:2001-09
    Weight: ca. 140g
    Connection: screw terminals, max. 2,5mm˛
    Protection class: caseIP30, terminals IP20 according to BGV A3

    Ratings (0)

    Average product review

    Write your first review and help others with their purchase decision: