Best sellers
- SKU:
- MB1-33RVOff
- Item weight:
- 0,09 kg
- 30 segments bargraph display
- vertical front panel mounting, 24 x 96mm
- segment colour: red/green selectable, optionally blue/red, orange/green
- small mounting depth: 60mm without the pluggable screw terminal
- parametrization via HEX switch and push button
- factory preadjusted input for standard signal 0 to 10V and 0/4 to 20mA
- free adjustment at the input signal possible
- 8 different types of presentation, parametrizable as bar, dot/point or curtain
- free direction selection and central display (for example, beams out of the centre)
- stepwise brightness control
- protection rate IP65 on the front
- plug-in screw terminal
- SKU:
- MB-3ff
- Variations in:
-
- Mounting/auxiliary voltage
- SKU:
- MB1-33RHOff
- Variations in:
-
- Supply Voltage
- Item weight:
- 0,09 kg
- 30 segments bargraph display
- horizontal front panel mounting, 24 x 96mm
- segment colour: red/green selectable, optionally blue/red, orange/green
- small mounting depth: 60mm without the pluggable screw terminal
- parametrization via HEX switch and push button
- factory preadjusted input for standard signal 0 to 10V and 0/4 to 20mA
- free adjustment at the input signal possible
- 8 different types of presentation, parametrizable as bar, dot/point or curtain
- free direction selection and central display (for example, beams out of the centre)
- stepwise brightness control
- protection rate IP65 on the front
- plug-in screw terminal
- SKU:
- N21-00M0
- Panel mounting
- Universal input (measurement of temperature and standard signals)
- New range for DC voltage measurements: ±75mV
- Relay alarm output
- Universal power supply from 24 to 230VAC/DC
- Supply output for external transducers: 24VDC
- OLED graphic display, horizontally or vertically configurable
- Configuration of the meter via mini USB interface via the free eCon software
- SKU:
- P1090
- Measuring range: 6 -690V AC/DC
- Backlight bar graph LCD display
- Integrated continuity test
- Residual current circuit breaker test (FI / RCD
- Acoustic signal
- TÜV/GS tested
In stock
- SKU:
- P2005A
- 28mm, 3 1/2-digit LCD display (max. 1999) with backlight
- Manual range selection
- hFE transistor test
- Capacity measurement up to 200µF
- Inductivity measurement up to 20 H
- Peak hold
- Temperature measurement using type-K probe
- Fast continuity test and diode test
- Auto power off and low battery indication
- Security: EN 61010-1; CAT III 1000V
- SKU:
- P3296
- SKU:
- P3360
- SKU:
- P3385
- SKU:
- P3415