• 30 segments bargraph display
• vertical front panel mounting, 24 x 96mm 
• segment colour: red/green selectable, optionally blue/red, orange/green  
• small mounting depth: 60mm without the pluggable screw terminal
• parametrization via HEX switch and  push button 
• factory preadjusted input for standard signal 0 to 10V and 0/4 to 20mA 
• free adjustment at the input signal possible 
• 8 different types of presentation, parametrizable as bar, dot/point or curtain  
• free direction selection and central display (for example, beams out of the centre) 
• stepwise brightness control 
• protection rate IP65 on the front
• plug-in screw terminal

• 28mm, 3 1/2-digit LCD display (max. 1999) with backlight
• Manual range selection
• hFE transistor test
• Capacity measurement up to 200µF
• Inductivity measurement up to 20 H
• Peak hold
• Temperature measurement using type-K probe
• Fast continuity test and diode test
• Auto power off and low battery indication
• Security: EN 61010-1; CAT III 1000V

• Measuring range: 6 -690V AC/DC
• Backlight bar graph LCD display
• Integrated continuity test
• Residual current circuit breaker test (FI / RCD
• Acoustic signal
• TÜV/GS tested

• Panel mounting
• Universal input (measurement of temperature and standard signals)
• New range for DC voltage measurements: ±75mV
• Relay alarm output
• Universal power supply from 24 to 230VAC/DC
• Supply output for external transducers: 24VDC
• OLED graphic display, horizontally or vertically configurable
• Configuration of the meter via mini USB interface via the free eCon software

• Automatic illuminated function keys and rotary switch
• Integrated powerful LED flashlight
• Bluetooth 4.0 interface for data transfer to Android or iOS smartphones
• TrueRMS measurements
• ACV, ACV+DCV, DCV measurement and Low Impedance (Lo Z)
• 3 5/6-digits measurement value display (max. 5999)
• LCD display with relative-value measurement and 42-segment bargraph
• Continuity with buzzer and diode test
• Data-Hold, Min, Max, Peak function and Duty Cycle (Hz / %)
• Heavy duty case, IP67 dust and waterproof
• Safety: EN 61010-1; CAT III 1000 V / CAT IV 600 V
• New App for "Vuzix" Augmented Reality Smart Glasses available

• Measurement of voltage, a.c. current or frequency
• Three-colour LED display (5 digits, 14 mm high)
• Digital output RS-485 - Modbus RTU protocol.
• Two alarm outputs of OC type.
• Programmable parameters through RS-485 interface using the free eCon software

The kit contains:

• Measurement: current and DC voltage up to 5A and 600V
• Three-colour display (14mm high), programmed in three intervals of the measured value
• Meter programming from the keyboard or through the RS-485 interface by means of the free delivered eCon software
• Four alarm outputs with signalling by LED diodes, operating in 6 different modes
• Conversion of any measured value into a 0/4...20mA, or 0...10V analog signal
• Storage of minimal and maximal values for all measured quantities
• 21-point individual characteristic for the measured value