Bargraph & Digital Display, Panel Meter, 96x24mm˛

Item number: MB-3ff

  • combo panel meter for 0-300VDC and 0-1ADC
  • red 3-digit digital display -199...999 digits (optional green display)
  • 30-points-bargraph tricolour
  • adjustable bargraph or dot operation or operation with permanent display of the midpoint
  • installation depth: 120 mm without plug-in screw terminal
  • version with multi voltage power supply: 100-240VAC/DC,
  • verison for low voltage supply: 10-40VDC /18-30VAC
  • display adjustment via factory setting or directly via sensor signal
  • min/max-memory with adjustable permanent display
  • 30 additional adjustable supporting points
  • display flashing at threshold value exceedance/undercut
  • zero key for the triggering of Hold, Tara, display change, setpoint setting, alarm actuation
  • flexible alarm system with adjustable delay times
  • volume metering (Totaliser)
  • mathematic functions like reciprocal value, root extraction, squaring and rounding
  • sliding averaging
  • programming interlock via access code
  • protection class IP65 at the front
  • plug-in screw terminal

    • Category: 96 x 24mm

    Mounting/auxiliary voltage
    345,10 €

    including 19% VAT.

    Exp. shipping time: ca. 2 weeks

    There are variations of this item. Please select the variation you wish.

    Description

    Bargraph & Digital Display, Panel Meter, 96x24mm˛

    The MB3 is a 30 points bargraph in combination with a 3-digit digital display.
    Designed for high direct voltage / direct current signals (up to 300V and 1ADC).
    Configuration is done via 4 front keys or via optional PC-software.
    Optional available are one analog output and two switching points.
    Selectable software functions, as well as a direct limit value adjustment in operating mode and different kinds of display options, as e.g. bars-/dot-operation for the bargraph, fullfill the standards of a modern device.

    The combo panel meter is available in two versions for vertical and horizontal front panel mounting as well as in two versions for the power supply: 100-240VAC/DC or 10-40VDC / 18-30VAC (please select when ordering).

    Technical data:
    Mounting dimensions: 96 x 24 mm
    Display:


    		 3-digit
    8 mm digit height
    Colour: red, optional green
    30 dots bargraph display tricolour
    Range displayed: -199...999
    Operation: front panel keyboard protection class IP65
    Input:

    		 High voltages
    0...1ADC / span -1...1ADC
    0...300VDC / span -300...300VDC
    Optional analogue output: 0/4-20 mA / 0-10 VDC / 16 Bit
    Optional switch points:
    		 2 relays (change-over contact)
    250VAC / 2AAC ; 30VDC / 2ADC
    Power supply:
    		 100-240VAC (50/60Hz) / 100-240VDC ±10% or
    10-40VDC / 18-30VAC
    Software properties:
    • adjustable bar- or dot operation or operation with permanent midpoint display
    • min/max-memory with adjustable permanent display
    • display flashing at threshold value exceedance/undercut
    • adjustable zero-key for the triggering of Hold, Tara, display change, setpoint setting, alarm actuator
    • flexible alarms system with adjustable delay times
    • volume metering (Totaliser)
    • mathematical functions like reciprocal value, root extraction, squaring and rounding
    • sliding averaging
    • programming interlock via access code

     


    Optional accessory:
    PM-TOOL   PC-based configuration software for devices without keypad.
                         For a simple adjustment of standard devices, incl. CD & USB adaptor.
                         Programming is done via interface.

    Ratings (0)

    Average product review

    Write your first review and help others with their purchase decision: