Process Management / Regulator - PSE - Priggen Special Electronic

Best sellers

NS5, Synchronizer for Feeding 3-Phase Current into the...

LUMEL

NS5, Synchronizer for Feeding 3-Phase Current into the Network

SKU:: NS5ff

Clear data visualization thanks to colour graphic display 3.5’’ TFT

Range of input signals: 150...400 V

Direct or indirect measurement through voltage transformers

Additional control inputs: BLK - lock synchronization, START - start synchronization

Programmable hysteresis of voltage difference, frequency, and phase shift angle

Ethernet interface (option) 10/100 base-t for connecting the synchronization meter to the local area network (LAN) or the global one (WAN)

Network services: web server, Modbus TCP / IP, DHCP server

RS-485 interface with Modbus RTU protocol

Ability to configure and uptdate the NS5 via free eCon Sofware (RS-485 or Ethernet interface)

Measurement of the minimum and maximum values of voltage and frequency

Panel mounting

3 years warranty

LUMEL

NS5, Synchronizer for Feeding 3-Phase Current into the Network

440,67 € - 532,76 € *

Go to item

Senseca

GIA 20 EB, Display Device and Controller with Universal Input, 24x48mm

SKU:: GIA20EB

Universal inputs for normalized signals, frequency, Pt100, Pt1000 and thermocouples

Configurable as display or controller (5 switching functions)

Extensive self-monitoring and diagnostic system

Limit functions, digital filter, min-/max value memory

Alarm delay selectable

Senseca

GIA 20 EB, Display Device and Controller with Universal Input, 24x48mm

253,47 € *

Go to item

: 11 - 13 Workdays (DE - int. shipments may differ)

PSE Priggen

LTR10, Multifunctional Timer Relay

SKU:: LTR10

10 time functions
10 time ranges (0.1s to 30h)
10 factors for the time ranges (0.1 to 1.0)
Operating voltage: 12 to 240V AC/DC
Modular housing 17.5mm
DIN rail mounting

PSE Priggen

LTR10, Multifunctional Timer Relay

53,98 € *

Go to item

: 1 - 3 Workdays (DE - int. shipments may differ)

LUMEL

RE11, Temperature Controller with LED Dual Display, 2 Outputs

SKU:: RE11

4+4 digits, 7 segment LED Dual high-contrast Display
Universal input for TC/ RTD sensors
PID, ON-OFF Control
Auto-Tuning / Self Tuning
Two Set points
°C /°F selectable
Field selectable Control Output (Relay or SSR)
Auxiliary Output: Relay

LUMEL

RE11, Temperature Controller with LED Dual Display, 2 Outputs

66,64 € *

Go to item

: 11 - 13 Workdays (DE - int. shipments may differ)

LUMEL

Voltage Protection Relay

SKU:

LP10-Vff

Variations in:

Phases/Relay Outputs

Compact size 17.5mm
True RMS measurement
Under voltage protection
Over voltage protection
Phase unbalance protection
Phase failure protection
Phase incorrect sequence protection
Neutral failure protection
'Adjustable nominal voltage, trip point, trip time delay
On site selection of VLL/VLN value based tripping
Self powered
Product variants for 1 or 3 phases and with 1 or 2 relay outputs
LED indication for faults
Disabling of over & under voltage fault on site is possible

LUMEL

Voltage Protection Relay

63,31 € - 74,97 € *

Go to item

LUMEL

RE70, Temperature Control with Universal Input and Relay Output

SKU:: RE70-00M0

Universal input for thermocouple and thermal resistance sensors

Relay output

Control algorithm: ON/OFF or PID

Manual setting of the PID parameters or with self-optimization

Password-protected parameter access

Housing protection: IP65

Supply voltage: 230VAC

Warranty: 3 years

LUMEL

RE70, Temperature Control with Universal Input and Relay Output

89,45 € *

Go to item

: 11 - 13 Workdays (DE - int. shipments may differ)

LUMEL

RE62, Industrial Process Controller with OLED Display, DIN Rail Mounting

SKU:

RE62ff

Variations in:

Output Variant

Universal input for RTDs, thermocouples and analog signals
Relay outputs
Additional output: 0/4-20mA or 0/5V (SSR)
PID on/off control algorithm
Innovative SMART PID algorithm
Interface: RS-485 with MODBUS RTU protocol
Universal power supply 24V or 230V AC/DC
Modular design fulfills the requirements for devices mounted in standard modular switchgears
Advanced graphic OLED display which guarantees clear indication, high contrast and wide viewing angle
Configuration parameters via keys or the RS485 and free eCon software
Supplied with test certificate
3 years warranty

LUMEL

RE62, Industrial Process Controller with OLED Display, DIN Rail Mounting

165,02 € - 180,44 € *

Go to item

NF20_96, Power Factor Controller, 96 x 96mm

LUMEL

NF20_96, Power Factor Controller, 96 x 96mm

SKU:

NF20_96ff

Variations in:

Number of Outputs

Programmable switch-on time, switch-off time and discharge time

Alarm message and relay

Monitoring of the individual capacitor power values

Programmable individual capacitor banks in kVar values

Operation time of capacitor

Capacitor switching count helps in increasing life of capacitor banks

LCD display with 2x16 characters for ease of readability

Relay steps: 4 or 8 switching outputs available

Measurement around 73 (MODBUS) electrical parameters (40 displayed on display)

True RMS measurement up to 31st harmonics

Wide voltage measuring input: 30 to 550VAC (L-L / L-N) with accuracy of 0.5%

Four-quadrant operation

Interface RS485 MODBUS for monitoring the PFC parameters remotely (optional)

Wide auxiliary supply voltage range: 110 to 550VAC/DC

3 years warranty

LUMEL

NF20_96, Power Factor Controller, 96 x 96mm

389,03 € - 434,53 € *

Go to item

NF20_144, Power Factor Controller, 144 x 144mm

LUMEL

NF20_144, Power Factor Controller, 144 x 144mm

SKU:

NF20_144ff

Variations in:

Number of Outputs

Programmable switch-on time, switch-off time and discharge time

Alarm message and relay

Monitoring of the individual capacitor power values

Programmable individual capacitor banks in kVar values

Operation time of capacitor

Capacitor switching count helps in increasing life of capacitor banks

LCD display with 2x16 characters for ease of readability

Relay steps: 6, 8 or 12 switching outputs available

Measurement around 73 (MODBUS) electrical parameters (40 displayed on display)

True RMS measurement up to 31st harmonics

Wide voltage measuring input: 30 to 550VAC (L-L / L-N) with accuracy of 0.5%

Four-quadrant operation

Interface RS485 MODBUS for monitoring the PFC parameters remotely (optional)

Wide auxiliary supply voltage range: 110 to 550VAC/DC

3 years warranty

LUMEL

NF20_144, Power Factor Controller, 144 x 144mm

497,96 € - 560,20 € *

Go to item

Precise Process Control and Regulators for Optimal Automation

In industry, manufacturing, and automation technology, precise process controls and regulators are essential to ensure efficient, stable, and reliable production processes. They enable the exact regulation of temperature, pressure, flow rate, humidity, and many other parameters to maintain optimal process quality.

Our range includes powerful regulators and control systems for a variety of applications – from simple PID controllers to complex process control systems for industrial plants. With their high accuracy, versatile interfaces, and easy integration into existing systems, our solutions ensure reliable automation and process optimization.

Explore our selection of process control systems and regulators and find the right solution for your individual requirements!