Best sellers
- SKU:
- MT-121
•Programmable logic controller (PLC), CODESYS® advanced programming environment (free of charge)
•Programming according to INTERNATIONAL STANDARD IEC 61131-3
•Embedded GSM 2G/4G modem
•Dual-SIM technology (passive) - access to 2 independent GSM networks ensures superior availability
•8 binary inputs (galvanic isolation)
•8 configurable binary inputs / outputs (galvanic isolation)
•3 analog inputs 4-20mA (galvanic isolation)
•1 analog output 4-20mA (galvanic isolation)
•Ethernet port 10Base-T/100Base-TX
•RS-232/485 serial port for external devices
•Diagnostic LEDs
•Redundant power inputs
•Real Time Clock (RTC)
•Data logger with 0.1s resolution
•Standard communication protocols (Modbus RTU, Modbus TCP)
•FlexSerial - programmable handling of non-standard serial protocols
•Remote configuration, programming, diagnostics and firmware upgrade (OTA)
•Industrial design, DIN rail mounting, screw terminals
•3-year warranty
•Programming according to INTERNATIONAL STANDARD IEC 61131-3
•Embedded GSM 2G/4G modem
•Dual-SIM technology (passive) - access to 2 independent GSM networks ensures superior availability
•8 binary inputs (galvanic isolation)
•8 configurable binary inputs / outputs (galvanic isolation)
•3 analog inputs 4-20mA (galvanic isolation)
•1 analog output 4-20mA (galvanic isolation)
•Ethernet port 10Base-T/100Base-TX
•RS-232/485 serial port for external devices
•Diagnostic LEDs
•Redundant power inputs
•Real Time Clock (RTC)
•Data logger with 0.1s resolution
•Standard communication protocols (Modbus RTU, Modbus TCP)
•FlexSerial - programmable handling of non-standard serial protocols
•Remote configuration, programming, diagnostics and firmware upgrade (OTA)
•Industrial design, DIN rail mounting, screw terminals
•3-year warranty
- SKU:
- GIA20EB
- SKU:
- LTR10
- 10 time functions
- 10 time ranges (0.1s to 30h)
- 10 factors for the time ranges (0.1 to 1.0)
- Operating voltage: 12 to 240V AC/DC
- Modular housing 17.5mm
- DIN rail mounting
- SKU:
- MT-025
- Replaces the models MT-020 and MT-021
- 2G/3G or 2G/4G (Cat M1, NB1) or 2G/4G Cat 1 data packet transmission
- Embedded GSM modem
- 4 Binary inputs/counting
- 4 Relay outputs
- Configuration port with jack 3,5 mm socket
- 1-Wire input
- DIN rail mounting
- Configurable via SMS commands
- Datalogger (up to 28k records)
- Removable terminal blocks
- Communication port RS-485 (option)
- SKU:
- RE11
- 4+4 digits, 7 segment LED Dual high-contrast Display
- Universal input for TC/ RTD sensors
- PID, ON-OFF Control
- Auto-Tuning / Self Tuning
- Two Set points
- °C /°F selectable
- Field selectable Control Output (Relay or SSR)
- Auxiliary Output: Relay
- SKU:
- RE12S
- Control action: Adaptive, Auto, Self-tune PID, ON-OFF
- Universal input: Thermocouple (J, K, T, R, S, C, E, B, N, L, U, W, Platinel II), RTD (PT100)
- Display: 4+4 digits LED display (White+Green)
- Profile Controller: Up to 128 steps
- Communication: RS485 MODBUS RTU
- Power Supply: 90...270 VAC/DC (50/60Hz)
- Alarm Outputs: Multiple settings including deviation high/low, absolute high/low, band, sensor break
- Hysteresis: 0.1...99.9°
- Compact design with short depth for easy panel mounting,
- Dimensions: 52 x 52 x45mm³
- SKU:
- RL1000E0
- Control system shutdown if temperature is exceeded or if there is a sensor error
- Variety of alarm settings
- Universal input for thermocouple and Pt100/Pt1000 sensors
- Relay output for switching off the temperature control system
- Programming via keyboard or freely available eCon software
- Self-holding function
- Dimensions: 48 x 48 x 93 mm³
- SKU:
- LP10 Vff
- Variations in:
-
- Phases/Relay Outputs
- Compact size 17.5mm
- True RMS measurement
- Under voltage protection
- Over voltage protection
- Phase unbalance protection
- Phase failure protection
- Phase incorrect sequence protection
- Neutral failure protection
- 'Adjustable nominal voltage, trip point, trip time delay
- On site selection of VLL/VLN value based tripping
- Self powered
- Product variants for 1 or 3 phases and with 1 or 2 relay outputs
- LED indication for faults
- Disabling of over & under voltage fault on site is possible