RE62, Industrial Process Controller with OLED Display, DIN Rail Mounting

Item number: RE62ff

  • Universal input for RTDs, thermocouples and analog signals
  • Relay outputs
  • Additional output: 0/4-20mA or 0/5V (SSR)
  • PID on/off control algorithm
  • Innovative SMART PID algorithm
  • Interface: RS-485 with MODBUS RTU protocol
  • Universal power supply 24V or 230V AC/DC
  • Modular design fulfills the requirements for devices mounted in standard modular switchgears
  • Advanced graphic OLED display which guarantees clear indication, high contrast and wide viewing angle
  • Configuration parameters via keys or the RS485 and free eCon software
  • Supplied with test certificate
  • 3 years warranty

Category: Process Controls

Output Variant

starting from 127,33 €

including 19% VAT.

There are variations of this item. Please select the variation you wish.


RE62, Industrial Process Controller with OLED Display, DIN Rail Mounting

The RE62 controller from LUMEL is destined to control the temperature and other physical quantities (pressure, humidity, level, etc.) in plastics,
food, dehydration industries and others where there is a need to stabilize the changes of the measured value. The measuring input is
universal for thermoresistor and thermocouple sensors or standard linear signals.
The controller allows dual-point control based on the PID or ON/OFF algorithm and alert signalization. This controller version is
equipped with a relay output and an additional 0/4-20mA analogue output.
The innovative SMART PID algorithm has been implemented in the controller.
All values and the configuration parameters of the controller are available via keys or via the RS485 communication interface.
The output signals are galvanically isolated from the input signals and power supply.
Technical data:
Pt100: -100 to +850°C
Thermocouple type J: -100 to +1200°C
Thermocouple type K: -100 to 1370°C
Standard current signal: -20 to +20mA
Voltage: -60 to +60mV
                   -10 to +10V
OUT1/2: Relay, NO contacts, 250VAC/5A
OUT3: Relay or 0/4-20mA or 0/5V (please select when ordering9
Digital Interface: RS-485 with MODBUS RTU protocol
Supply voltage: 24V AC/DC und 230V AC/DC
Display: OLED, 128 x 64 pixels, amber colour
Operating temperature: -10 to +55°C
Storage temperature: -25 to +70°C
Operating humidity: < 95%, non-condensing
Housing protection: IP30 (front),  IP20 (terminals)
Dimensions: 53 x 110 x 60.5mm³
Weight: < 0.2kg


Ratings (0)

Average product review

Write your first review and help others with their purchase decision: