Description
EFM 022 ZBS, Static Electrical Field Meter with Accessory Set
Thanks to its compact design and single- button operation the field meter EFM 022 is very user friendly. The antistatic plastic housing is EPA compatible. The EFM 022 has got very useful technical charakteristics, which other comparable instruments haven't got.
Menue controlled measuring distance preselection
Voltage potentials on the measured object can be determined by the preselection of the measuring distance directly. Thereby, there is no need of time consuming calculations. There are 5 measuring distances available, enabling an optimal handling of the device, even in problematic detection areas.
Hold function
The reading can be frozen in the display. Thus, also precise measurements can taken at difficult to access places.
Very high zero-point stability
Thereby, zero-point adjustment before every measurement is not necessary, which is needed with other systems.
| Distance 1cm: | 0 to 10kV |
| Distance 2cm: | 0 to 20kV |
| Distance 5cm: | 0 to 50kV |
| Distance 10cm: | 0 to 100kV |
| Distance 20cm: | 0 to 200kV |
Technical data:
| Sizes: | 122mm x 70mm x 26mm ( L x W x D ) |
| Weight: | ca. 130g (without battery) |
| Power supply: | 9V block battery IEC 6F22 |
|
Display: |
2 lined alphanumeric LCD display with 12 digits each. In the upper line the measuring distance and in the lower one the measured load is displayed in Volt units. |
| Scope of delivery: |
|