ESM-2, Electro Stress Meter with Acoustical Indication
Suitable for measuring the body voltage (capacitive body coupling) within the electrical alternating field. People, staying within electrical fields, are energised. The intensitiy of the voltage is a measure for the stress impacting the body.
The Electro Stress Meter ESM-2 measures this voltage via a hand probe towards ground and indicates the value digitally. If the measured voltage exceeds certain bau-biology benchmarks, it can be reduced to uncritical values by targeted measures which are mostly simply to be done. Thereby, the ESM-2 always shows the success of the respective measure and thus, helps you to take the right steps.
It should be the target to reduce body voltage nearly to zero, especially in sleeping an rest areas, so that people staying there can address themselves to their tasks again non-uptightly and without stress.
The device has got a switcheable acoustical indication, changing its signal tone proportionally to the intensity of the body voltage. This is helpful for the above mentioned reduction of the body voltage as well as for the detection of strong radiation sources.
Mode d'emploi également disponible en français!
Measuring ranges: 200/2,000/20,000mV AC (±5% of end of scale, ±6 digits)
Display: LCD, true RMS values, "LO-BAT" for low battery
Frequency range: 10Hz - 2,000Hz (-3dB)
Power supply: 9V battery
Sizes: 150 x 85 x 30 mm³
Weight: ca. 250g
Scope of delivery:
- Electro Stress Meter ESM-2
- Carry case or textile carrying bag (depending on availability)
- Grounding cable with German/European grounded plug, cable length: 3m
- Chrome plated hand electrode