MT-UPS-1, UPS Module, 24VDC/0.5A, Microprocessor Controlled

MT-UPS-1, UPS Module, 24VDC/0.5A, Microprocessor Controlled

SKU: MT-UPS-1
Category: inVentia Telemetry, PLC, GSM
Manufacturers: inVentia

Uninterruptible 24VDC power supply (UPS) for the professional series of MT telemetry modules

Nominal output current 0.5A; max. output current 1.5A (max. 10s)

Wide range of battery capacities from 2.4Ah to 9Ah

Can be supplied from a photovoltaic cell (max. effect due to voltage adjustment)

Microprocessor controlled charging of battery

Integrated circuit for battery protection

6 diagnostic LED diodes

Fast DIN rail mounting

IP40 protection class

3 years warranty

179,69 €

incl. 19% VAT

Exp. shipping time: ca. 1 week
: 0 Workdays (Other countries)

pc.

Description
Reviews

MT-UPS-1, UPS Module, 24VDC/0.5A, Microprocessor Controlled

Special, buffered power supply (UPS) for professional series of MT telemetry modules (MT-021, MT-100, MT-101, MT-102, MT-151, MT-202)
Wide range of battery capacities from 2.4Ah to 9Ah
Nominal output current: 0.5A; max. output current 1.5A (max. 10sec)
Can be supplied from a photovoltaic cell (max. effect due to voltage adjustment)
Microprocessor controlled charging of battery
Integrated circuit for battery protection
6 diagnostic LED diodes
Fast DIN rail mounting
IP40 protection class
3 years warranty

MT-UPS-1 is a modern, digitally controlled buffered power supply acting as a UPS for telemetry modules and external receivers when mains supply fails. The module can cooperate with any main supply delivering 24VDC (main power source) and an external SLA battery (backup power source) with 12V nominal voltage. It can be used for batteries with 2.4Ah to 9Ah capacity. The module has a special output to warn of main supply failure - a classic UPS function. The circuit charges and maintains the battery when main supply is active (mains or a photovoltaic cell). The algorythm for auto-adjustment for photovoltaic cell uses the energy delivered by photo voltaic cell under poor light conditions.

Functionality

LED diagnostic diodes reflect the current unit status. Detachable terminals with clear marking.
UPS compatible signal output for attachment of MT series telemetry modules
Independent of supply source stabilising of output voltage, Secures performance under transmission (higher energy consumption)
Support for photovoltaic cells with max. effect at 16-18V voltage
Step-up and step-down microprocessor controlled converter
Short circuit protection at inputs and outputs
Parametrising of voltages threshold protects the battery
Adapted to 12V SLA batteries with 2.4Ah to 9Ah capacity
Wide operating temperature range -20 to +55°C
Main supply voltage from 21.6VDC

Technical data_
Input voltage (main supply): 24VDC ±10%
Charging current: from 0.25A to 0.9A
Nominal output voltage: 24VDC (21VDC from battery)
Nominal output current: 0.5A
Highest output current: 1,5A (max. 10sec)
Battery cut off voltage: <10.5V
Ripple (between peaks): <1%
Operating temperature: -20 to +55°C
Storage temperature: -25 to +70°C
Dimensions: 86 x 35 x 58mm³
Protection class: IP40

The MT-UPS-1 module is supplied without the MT-101 module, battery and receivers, depicted on the drawing.

© Copyright Hermsdorf Steuerungstechnik

There are no reviews yet.