MT-651, Telemetry Module for Cathodic Corrosion Protection Systems

MT-651, Telemetry Module for Cathodic Corrosion Protection Systems

SKU: MT-651
Category: inVentia Telemetry, PLC, GSM
Manufacturers: inVentia

6 measurement channels

Measurement of AC and DC voltages

Measurement in the range of microvolts

Integrated GSM/GPRS/EDGE and UMTS/HSDPA modem

Dual-SIM technology

2 binary inputs

2 groups of analogue inputs with 2 differential inputs each

2 optoisolated binary outputs

Battery power supply (optional external power source)

Built-in GPS receiver, integrated GPS antenna und accelerometer

Internal temperature sensor

Local communication over USB, RS485 or optional Bluetooth LE

Remote communication via GPRS or SMS

3 years warranty

2.341,92 €

incl. 19% VAT

: 5 Workdays (DE - int. shipments may differ)

Description
Reviews

MT-651, Telemetry Module for Cathodic Corrosion Protection Systems

MT-651 telemetry module provides compact and high specification solution for remote monitoring and controlling of pipeline cathodic protection systems, tanks and other metal structures buried in the ground or submerged in water. The flexibility of module configuration allows you to adjust it to a series of installations - from the simplest to the most complex. Internal resources of the device allow for easy and secure remote configuration and implemented data protection mechanisms ensure safe operation of the system. MT-651 module is dedicated to the system where power lines are not available.

The module comes with free software that uns on Microsoft Windows. It enables local configuration, remote configuration and includes an OPC driver that enables integration in SCADA systems.

Funktionsweise:
* Mounting in the ø100 mm measurement bollard
* Power supply by internal battery pack (external as option)
* Built-in Quad Band GSM modem
   - 2G (GSM/GPRS EDGE 900/1800)
   - 3G (UMTS/HSPA+ 900/2100)
* Communication interfaces: USB, RS-485, optional Bluetooth 4.x
* Dual-SIM technology - access to 2 independent GSM networks ensures superior availability
* 2 binary inputs (one of them operates with pull up to the ground, one voltage sens.)
* 2 optoisolated groups of analog inputs where each of them contains 2 differential inputs (configurable measurement range 0-10V or 0-100V) and 1 dedicated input 0-100mV)
* 2 optoisolated binary outputs (one NC type, second for control external bistable relay)
* Execute of measurements in the synchronous mode
* Scheduler of measurements and tasks with possibilityof modification by user
* Built-in GPS receiver for time synchronization
* The accelerometer to detect tampering with the device or the devastation attempts (included unauthorized movement)
* Remote configuration, communication, monitoring and firmware upgrade via GPRS
* Internal temperature sensor
* Detection of main power failure and battery monitoring
* 5 status LEDs (digital I/O states, Power supply status, GSM status and activity, GPS status)
* Data logger with 0,1 second resolution stored data events in flash memory (capacity: 180,000 records)
* Possibility to store data on the microSD card
* Ability to integrate with SCADA system (OPC DA, OPC UA, ODBC and CSV support)
* Transmission mode:
   - GPRS/HSDPA - packet transmission
   - SMS
* Configurable access security - IP and Phone list, optional password
* User friendly configuration software
* Open communication protocol OPEN2

Technical data:
General:
Dimensions without connectors: 190mm x 75mm x 55mm (LxWxH)
Weight: 900g
Operating temperature: -20 to +55°C
Protection rate: IP65

GSM/GPRS Modem:
Modem type: uBlox Sara-U201 (optional) / uBlox Sara-U270
Frequency range: 2G: 850/900/1800/1900 MHz / 2G: 900/1800 MHz
                           3G: 800/850/900/1900/2100 MHz / 3G: 900/2100 MHz
Antenna: 50 Ohm
GSM antenna connector: SMA-m

Power supply:
Voltage range: 7-30VDC
Internal battery pack: 3 lithium batteries LSH14 (3,6V) 10,8V; capacity: 17.4Ah
Input current (for 24V): Idle: 800µA
                                   Active: 70mA, 200mA (charging)
                                   Max: 2A

Inputs IN1, IN2:
Input voltage range: 0 to +30V
Input resistance: 60kOhm typ.
Input voltage ON (1): >9Vmin.
Input voltage OFF (0): <3V max.
Minimum pulse length: 5ms

Outputs OUT1, OUT2:
Switching voltage: 220V AC/DC
Switching current per output: 1.5A
max. switching power: 50W, 100VA

Two groups of optoisolated inputs with common ground (ANA, ANB):
0-100mV input: mVA, mVB:
   Measuring range: ±100mV
   Resolution: 1µV
   AccuracyDC: ±0.1%
   Input resistance: >1MOhm
0-100V input: ANA1, ANA2, ANB1, ANB2:
   Measuring range DC: ±10V; ±100V
   Measuring range AC: 100V
   Accuracy DC: ±0.1%
   Input resistance: >10MOhm

Internal temperature sensor:
Accuracy: ±1°C

GPS receiver:
Time synchronization accuracy: ±1ms

Communication interfaces RS485, USB, BLE:
Wire-bound: RS-485 (optoisolated)
                    USB (non-isolated, internal)
Wireless (remote, optional): Bluetooth 4.x, BLE

Data logger:
Internal memory: 180,000 records
Data storage on microSD card: Depends on the capacity of microSD card. Support for 32GB microSD cards

© Copyright Hermsdorf Steuerungstechnik

There are no reviews yet.