Transducer with Display for Hat Rail Mounting, Universal Input

Item number: MH-1Uff

  • Transducer with universal input and analogue output
  • red†LED display†from -199...999 digits
  • digit height†ca. 7 mm
  • min/max value recording
  • 9 adjustable supporting points
  • display flashing at treshold value exceedance / undercut
  • Tara function
  • programming interlock via access code
  • pluggable screw-terminal
  • further optional functions upon surcharge
  • Category: Measuring Transducers

    Auxiliary voltage

    starting from 176,12 €

    including†19% VAT.

    Exp. shipping time: ca. 2 weeks

    There are variations of this item. Please select the variation you wish.


    Transducer with Display for Hat Rail Mounting, Universal Inputt

    The transducer MH-1U with universal input and 3-digit display was designed for the top hat rail mounting, for the measuring of voltage/current, temperature, frequency rotational speed and counter.
    The configuration is done via 3 front keys or via the optional PC software PM-TOOL.
    Optionally the transducer can be equipped with an analog output, a sensor supply, 4 switching points, as well as with an interface RS232/RS485 (Modbus protocol).

    Technical data:
    LED Display:

    Colour: red
    7 mm digit height
    -199...999 digits (internal -1999...9999 digits)
    Range displayed: -199...999
    Operation: front panel keyboard

    Direct voltage / Direct current
    Thermocouple type L, J, K, B, S, N, E, T, R
    Analogue output: 0/4...20 mA
    0-10 VDC
    Interface: RS232/RS485 (optional)
    Power supply
    (select when ordering:

    24 VDC galvanic isolated or
    100-240 VAC 50/60 Hz / DC +/- 10% or
    15-40 VDC, 20-30 VAC
    Sensor supply: 24 VDC / 50 mA, incl. digital input
    Dimensions: 22.5 x 117.2 x 107mm≥ (W x H x D)
    Software properties:

    • 9 adjustable supporting points
    • min/max value recording
    • display flashing at threshold value exceedance / undercut
    • tara function
    • programming interlock via access code
    • plug-in screw termina
    • optional: analog output 0-10 VDC, 0/4-20 mA
    • optional: interface RS232 / RS485†
    • optional: sensor supply incl. digital input
    • optional: two relay outputs or two PhotoMos outputs
    • optional: two relay outputs and two PhotoMos outputs

    Optional accessory:
    PM-TOOL†† PC-based configuration software for devices without keypad.
    †††††††††††††††††††††For a simple adjustment of standard devices, incl. CD & USB adaptor.
    †††††††††††††††††††† Programming is done via interface.

    Ratings (0)

    Average product review

    Write your first review and help others with their purchase decision: