GPHU 014 MP-BNC, pH Transducer with On-Site Display and Galvanic Isolation, without Electrode

Item number: GPHU014MP-BNC

  • measuring range: 0.00 - 14.00pH
  • LCD display
  • automatic and manual temperature compensation
  • external Pt1000 temperature probe connectable
  • sensor input electrically isolated
  • 2-point calibration
  • analogue output: 4-20mA
  • Category: pH Meters and Transducers


    358,19 €

    including19% VAT.

    Exp. shipping time: ca. 1 week

    : 7 workdays

    pc.


    Description

    GPHU 014 MP-BNC, pH Transducer with On-Site Display and Galvanic Isolation, without Electrode

    Eigenschaften:
    • automatically and manually temperatur compensation
    • external Pt1000-temperature probe connectable
    • sensor input electrically isolated
    • 2-point calibration

    Technical data:
    Measuring range: 0.00 to 14.00 pH
    Accuracy: 0.02 pH 1 digit (at nominal temperature = 25C)
    Output signal: 4 - 20 mA (2-wire), standard
    0 - 10 V (3-wire), optional
    Electric isolation: input electrically isolated
    Auxiliary energy: 12 ... 30 V DC (for option 0-10V: 18 ... 30 V DC )
    Perm. impedance (at 4-20mA): RA [Ohm] = (Uv [V] - 12V) / 0.02 A
    Permissible load (at 0-10Volt): RL > 3000 Ohm
    Electrode: any standard pH electrode is suitable.
    (ph electrode not included in scope of supply)
    Input resistance: 1012 Ohm
    Electrode socket:
    Probe connection: BNC-socket
    Temperature compensation: -30 ... 150C,
    manually via 3 keys or automatically via external Pt1000 sensor.
    Adjustment: via 3 keys and integrated LCD
    Temp. sensor socket: 2x banana socket 4mm, for Pt1000 probe.
    Display: approx. 10 mm high, 4-digit LCD-display
    Working temperature: 0 ... +50 C (electronic)
    Storage temperature: -20 ... +70 C
    Electric connection: elbow-type plug acc. to EN 175301-803/A (IP65)
    Housing: ABS
    IP rating: IP65, with the exception of electrode and temp.
    Connection sockets. (cpl. IP65 upon request)
    Dimensions: 82 x 80 x 55 mm (H x W x D)
    Mounting: with fixing holes for wall mounting
    Mounting distance: 70 x 50 mm (W x H)
    Fixing screws: max. shaft-

    Options / upcharge:
    AV010: output signal 0-10V
    MB...: limited measuring range (please state the desired range)
    (i.e.: 2,00 ... 10,00 pH)


    Optional accessories/spare parts:

    GTF 2000 WD - B: water proof Pt1000 temperature probe, with 2 banana plugs 4mm
    further Pt1000 temperature probes available
    GE 100: standard electrode, BNC plug
    GE 117: 1 x BNC-plug and 1 x banana plug 4mm, thread PG13,5, pressure resistant up to 6bar
    GE 125: waterproof pH electrode with integrated Pt1000 sensor, non pressure resistant, 1 x BNC plug and 1 x banana plugs 4mm
    PG 13.5 plug on thread adapter for pressureless use
    GAK 1400 working and calibration set

    Ratings (0)

    Average product review

    Write your first review and help others with their purchase decision: