Best sellers
Limit Value Switch GS125L with Universal Input, 24VDCl
Limit Value Switch GS125L with Universal Input, 24VDCl
SKU:
GS125L-2-1-00
  • universal input for industry standard signals, Pt100, thermocouple and potentiometer
  • 2 relay outputs
  • 4-20mA output
  • adjustable min/max contact function 
  • 2-colour illuminated  scales for limit value adjustment
  • monitoring of sensor break and short-circuit with Pt100 sensors
  • auxiliary voltage 24VDC
  • functional safety up to SIL2
  • housing width only 12.5mm
  • removable coded terminals
  • carrier rail mounting TS35 EN60715
  • safe galvanic isolation between input/output and auxiliary voltage
Senseca
Limit Value Switch GS125L with Universal Input, 24VDCl
235,62 € *
Go to item
  • : 11 - 13 Workdays  (DE - int. shipments may differ)
Best sellers
TS500-Ex-2R-0, 2-Channel Isolating Switching Repeater, 2...
TS500-Ex-2R-0, 2-Channel Isolating Switching Repeater, 2 Relay Outputs, 230VAC
SKU:
TS500-Ex-2R-0
  • Inputs for switching contact, proximity switch Namur type acc. to DIN EN 60947-5-6 or opto-coupler
  • Inputs intrinsically safe acc to ATEX II (1) G [Ex ia] IIC/IIB, ATEX II (1) D [Ex iaD
  • Switchable line fault detection for broken and shorted lines
  • Output relays SPDT contacts
  • Supply voltage 230 VAC
  • Power on LED, status / error LED
  • 22.5mm case for DIN rail mounting
    • Senseca
    TS500-Ex-2R-0, 2-Channel Isolating Switching Repeater, 2 Relay Outputs, 230VAC
    197,54 € *
    Go to item
    • : 11 - 13 Workdays  (DE - int. shipments may differ)
    Best sellers
    LED Bargraph Display, Vertical, 24 x 96mm
    LED Bargraph Display, Vertical, 24 x 96mm
    SKU:
    MB1-33RVOff
    Item weight:
    0,09 kg
    • 30 segments bargraph display
    • vertical front panel mounting, 24 x 96mm 
    • segment colour: red/green selectable, optionally blue/red, orange/green  
    • small mounting depth: 60mm without the pluggable screw terminal
    • parametrization via HEX switch and  push button 
    • factory preadjusted input for standard signal 0 to 10V and 0/4 to 20mA 
    • free adjustment at the input signal possible 
    • 8 different types of presentation, parametrizable as bar, dot/point or curtain  
    • free direction selection and central display (for example, beams out of the centre) 
    • stepwise brightness control 
    • protection rate IP65 on the front
    • plug-in screw terminal
    PSE Priggen
    LED Bargraph Display, Vertical, 24 x 96mm
    207,06 € *
    Go to item
    Peak Tech 2795, Tachometer Photo-Contact-Type with Laser
    Peak Tech 2795, Tachometer Photo-Contact-Type with Laser
    SKU:
    P2795
  • measurement type: rotation speed, total revolutions,frequency, surface speed  and length 
  • wide measure range and high resolution
  • 40 reading memories: MAX, MIN, AVG, DATA
  • laser targeting (class II laser; < 1 mW)
    • PeakTech
    Peak Tech 2795, Tachometer Photo-Contact-Type with Laser
    95,08 € *
    Go to item
    • : 6 - 8 Workdays  (DE - int. shipments may differ)
    Peak Tech 2790, Digital Tachometer
    Peak Tech 2790, Digital Tachometer
    SKU:
    P2790
  • two test modes: rotate speed mode & count mode
  • wide measure range and high resolution
  • high visible digital LCD and backlight display
  • built-in memory recalls MAX / MIN and last value stored
  • low battery indication / auto-range
    • PeakTech
    Peak Tech 2790, Digital Tachometer
    99,96 € *
    Go to item
    • : 6 - 8 Workdays  (DE - int. shipments may differ)
    Universal Temperature Display GTH 2448, LED, 24 x 48mm
    Universal Temperature Display GTH 2448, LED, 24 x 48mm
    SKU:
    GTH2448ff
    Variations in:
    • Model:
  • 5 different models for various sensor types and measuring ranges
  • supply voltage: 8-20VDC or 18-29VDC
  • for panel mounting, 24 x 48mm
    • Senseca
    Universal Temperature Display GTH 2448, LED, 24 x 48mm
    107,27 € - 126,46 € *
    Go to item
    LLM3, 3-Phase Live Line Indicator for DIN Rail Mounting
    LLM3, 3-Phase Live Line Indicator for DIN Rail Mounting
    SKU:
    LLM3ff
    Variations in:
    • Variant
  • Indication of the presence of the three phase voltages towards neutral wire
  • Display voltage range: 3 x 230 ... 400VAC
  • DIN rail mounting for the installation in the control cabinet
  • External optional indication for the control cabinet door
  • 3 years warranty
    • LUMEL
    LLM3, 3-Phase Live Line Indicator for DIN Rail Mounting
    119,01 € - 168,99 € *
    Go to item
    In stock
    TS125L-Ex-1-00, Isolating Switch Amplifier with...
    TS125L-Ex-1-00, Isolating Switch Amplifier with Intrinsically Safe Inputs
    SKU:
    TS125L-Ex-1-00
    • 1-channel version
    • Safe galvanic isolation between input / output / auxiliary voltage
    • Functional safety up to SIL2 EN61508
    • Inputs for switching contacts, Namur initiators or optocouplers
    • Intrinsically safe inputs for connecting sensors in Ex zones 0 and 20
    • Device installation i Ex zone 2 possible
    • Galvanic isolation according to reinforced insulation requirements (EN60664)
    • Switchable monitoring of the input circuit for wire breaks and short circuits
    • Relay output as NO contact (effect can be inverted)
    • Auxiliary voltage 24VDC
    • Configuration via DIP switches on the front
    • Pluggable coded terminal blocks
    • Housing width 12,5mm
    • DIN rail mounting TS35 EN60715
    • Operating display, switching status and error display by LEDs
    Senseca
    TS125L-Ex-1-00, Isolating Switch Amplifier with Intrinsically Safe Inputs
    128,52 € *
    Go to item
    • : 1 - 3 Workdays  (DE - int. shipments may differ)
    Universal Isolating Amplifier, TV125L
    Universal Isolating Amplifier, TV125L
    SKU:
    TV125L
  • safe galvanic isolation between input/output/auxiliary voltage
  • step response T90: 40ms
  • output deviation <0.2% of the limit value
  • overload protection of the current input with automatically resetting fuse
  • operating display and status messages via two-colour LED
  • configuration via front DIP switches
  • plug-in terminal strips
  • slim installation width of 12.5mm for carrier rail mounting TS 35
    • Senseca
    Universal Isolating Amplifier, TV125L
    130,90 € *
    Go to item
    • : 11 - 13 Workdays  (DE - int. shipments may differ)
    ND04, ND04, Panel Mount Meter for 3-Phase Network...
    ND04, ND04, Panel Mount Meter for 3-Phase Network Parameters, LED Display, 96 x 96mm
    SKU:
    ND04ff
    Variations in:
    • Supply Voltage
  • True RMS measurement (up to 15th harmonic)
  • On site programmable PT/CT ratios.
  • User selectable type of network: 3phase 3wire or 4wire.
  • On site programmable ranges of inputs.
  • 3 Line 4 digits ultra bright LED display (display value up to 9999)
  • Onsite selection of Auto Scroll / Fixed Screen.
  • Min Max storage of parameters possible.
  • Four function keys enable instant access to the desired parameter screen
    • LUMEL
    ND04, ND04, Panel Mount Meter for 3-Phase Network Parameters, LED Display, 96 x 96mm
    115,79 € - 263,98 € *
    Go to item
    N21, Panel Meter with OLED Graphic Display for...
    N21, Panel Meter with OLED Graphic Display for Temperature and Standard Signals
    SKU:
    N21-00M0
    • Panel mounting
    • Universal input (measurement of temperature and standard signals)
    • New range for DC voltage measurements: ±75mV
    • Relay alarm output
    • Universal power supply from 24 to 230VAC/DC
    • Supply output for external transducers: 24VDC
    • OLED graphic display, horizontally or vertically configurable
    • Configuration of the meter via mini USB interface via the free eCon software
    LUMEL
    N21, Panel Meter with OLED Graphic Display for Temperature and Standard Signals
    141,88 € *
    Go to item
    • : 11 - 13 Workdays  (DE - int. shipments may differ)
    N20ZPLUS, Panel Meter for AC Current, AC Voltage and...
    N20ZPLUS, Panel Meter for AC Current, AC Voltage and Frequency, with RS-485, 96 x 48mm
    SKU:
    N20ZPLUSff
    Variations in:
    • Input Type / Supply Voltage
    • Measurement of voltage, a.c. current or frequency
    • Three-colour LED display (5 digits, 14 mm high)
    • Digital output RS-485 - Modbus RTU protocol.
    • Two alarm outputs of OC type.
    • Programmable parameters through RS-485 interface using the free eCon software
    LUMEL
    N20ZPLUS, Panel Meter for AC Current, AC Voltage and Frequency, with RS-485, 96 x 48mm
    154,22 € *
    Go to item
    Best sellers
    Limit Value Switch GS125L with Universal Input, 24VDCl
    Limit Value Switch GS125L with Universal Input, 24VDCl
    SKU:
    GS125L-1-0-00
    • universal input for industry standard signals, Pt100, thermocouple and potentiometer
    • 2 relay outputs
    • 4-20mA output
    • adjustable min/max contact function 
    • 2-colour illuminated  scales for limit value adjustment
    • monitoring of sensor break and short-circuit with Pt100 sensors
    • auxiliary voltage 24VDC
    • functional safety up to SIL2
    • housing width only 12.5mm
    • removable coded terminals
    • carrier rail mounting TS35 EN60715
    • safe galvanic isolation between input/output and auxiliary voltage
    Senseca
    Limit Value Switch GS125L with Universal Input, 24VDCl
    159,46 € *
    Go to item
    • : 11 - 13 Workdays  (DE - int. shipments may differ)
    GIA 0420 N, Freely Scalable LCD Display for 4-20mA...
    GIA 0420 N, Freely Scalable LCD Display for 4-20mA Signals, Self-Supplying
    SKU:
    GIA0420N
  • Time-saving on-site scaling without the need of tools within seconds
  • Highest operation security by integrated self-diagnosis and watchdog funktion
  • Large display range of -1999 to 9999 digit
  • Big 10 mm high LCD display
  • Monitoring for sensor breakings, sensor short circuit, low and high range excess
  • Connectable software filter for a steady reading also with noisy sensor signals
    • Senseca
    GIA 0420 N, Freely Scalable LCD Display for 4-20mA Signals, Self-Supplying
    167,79 € *
    Go to item
    • : 11 - 13 Workdays  (DE - int. shipments may differ)
    TW500, Loop Powered Signal Isolator 0/4-20mA
    TW500, Loop Powered Signal Isolator 0/4-20mA
    SKU:
    TW500ff
    Variations in:
    • Channels
    Item weight:
    0,13 kg
  • 1, 2 or 3 channels
  • High protection acc. German VDE 0110 group 2
  • High accuracy
  • Low voltage drop
  • 22.5mm case for DIN rail mounting
    • Senseca
    TW500, Loop Powered Signal Isolator 0/4-20mA
    168,98 € - 384,37 € *
    Go to item
    Isolating Signal Converter TV 500L for DIN Rail Mounting
    Isolating Signal Converter TV 500L for DIN Rail Mounting
    SKU:
    TV500Lff
    Variations in:
    • Supply Voltage
    • Eingänge
    Item weight:
    0,15 kg
  • full 3-port isolation
  • input: 0/4...20mA and 0/2...10VDC
  • output 0/4...20mA and 0/2...10VDC
  • increasing output characteristic
  • supply voltage: 230VAC or 24VDC
  • power-on LED
  • 22,5mm case for DIN rail mounting
    • Senseca
    Isolating Signal Converter TV 500L for DIN Rail Mounting
    170,17 € *
    Go to item
    TS500-1R-0, Isolating Switching Repeater, Relay Output,...
    TS500-1R-0, Isolating Switching Repeater, Relay Output, 230VAC
    SKU:
    TS500-1R-0
  • Inputs for switching contact, proximity switch Namur type acc. to DIN EN 60947-5-6 or opto-coupler
  • Switchable line fault detection for broken and shorted lines
  • Output relay SPDT contact
  • Supply voltage 230VAC
  • Power on LED, status / error LED
  • 22.5mm case for DIN rail mounting
    • Senseca
    TS500-1R-0, Isolating Switching Repeater, Relay Output, 230VAC
    170,17 € *
    Go to item
    • : 11 - 13 Workdays  (DE - int. shipments may differ)
    TS500-1R-5, Isolating Switching Repeater, Relay Output,...
    TS500-1R-5, Isolating Switching Repeater, Relay Output, 24VDC
    SKU:
    TS500-1R-5
  • Inputs for switching contact, proximity switch Namur type acc. to DIN EN 60947-5-6 or opto-coupler
  • Switchable line fault detection for broken and shorted lines
  • Output relays SPDT contact
  • Supply voltage 24VDC
  • Power on LED, status / error LED
  • 22.5mm case for DIN rail mounting
    • Senseca
    TS500-1R-5, Isolating Switching Repeater, Relay Output, 24VDC
    170,17 € *
    Go to item
    • : 11 - 13 Workdays  (DE - int. shipments may differ)
    Universal Transmitter UT125M, Transmitter for Electrical...
    Universal Transmitter UT125M, Transmitter for Electrical Signals
    SKU:
    UT125M
  • Transmitter for electrical signals
  • Universal input for standard signals, Pt100, thermocouple, potentiometer, configuration via front-side DIP switch
  • Analog output 4-20 mA
  • With Pt100 sensors, monitoring of sensor break and short-circuit
  • Wide-range power supply
  • Housing width 12.5 mm
  • Removable coded screw terminals
  • Carrier rail mounting TS35 EN60715
    • Senseca
    Universal Transmitter UT125M, Transmitter for Electrical Signals
    171,36 € *
    Go to item
    • : 11 - 13 Workdays  (DE - int. shipments may differ)
    Transducer with Display for Hat Rail Mounting, Universal...
    Transducer with Display for Hat Rail Mounting, Universal Input
    SKU:
    MH-1Uff
    Variations in:
    • Auxiliary voltage
  • Transducer with universal input and analogue output
  • red LED display from -199...999 digits
  • digit height ca. 7 mm
  • min/max value recording
  • 9 adjustable supporting points
  • display flashing at treshold value exceedance / undercut
  • Tara function
  • programming interlock via access code
  • pluggable screw-terminal
  • further optional functions upon surcharge
    • PSE Priggen
    Transducer with Display for Hat Rail Mounting, Universal Input
    176,12 € - 214,20 € *
    Go to item
    TS500-Ex-1R-0, 1-Channel Isolating Switching Repeater,...
    TS500-Ex-1R-0, 1-Channel Isolating Switching Repeater, Relay Output, 230VAC
    SKU:
    TS500-Ex-1R-0
  • Input for switching contact, proximity switch Namur type acc. to DIN EN 60947-5-6 or opto-coupler
  • Input intrinsically safe acc. to ATEX II (1) G [Ex ia] IIC/IIB, ATEX II (1) D [Ex iaD]
  • Switchable line fault detection for broken and shorted lines
  • Output relay SPDT contact
  • Supply voltage 230 VAC
  • Power on LED, status / error LED
  • 22.5mm case for DIN rail mounting
    •
    Senseca
    TS500-Ex-1R-0, 1-Channel Isolating Switching Repeater, Relay Output, 230VAC
    178,50 € *
    Go to item
    • : 11 - 13 Workdays  (DE - int. shipments may differ)
    TS500-Ex-1R-5, 1-Channel Isolating Switching Repeater,...
    TS500-Ex-1R-5, 1-Channel Isolating Switching Repeater, Relay Output, 24VDC
    SKU:
    TS500-Ex-1R-5
  • Input for switching contact, proximity switch Namur type acc. to DIN EN 60947-5-6 or opto-coupler
  • Input intrinsically safe acc to ATEX II (1) G [Ex ia] IIC/IIB, ATEX II (1) D [Ex iaD]
  • Switchable line fault detection for broken and shorted lines
  • Output relay SPDT contact
  • Supply voltage 24VDC
  • Power on LED, status / error LED
  • 22.5mm case for DIN rail mounting
    • Senseca
    TS500-Ex-1R-5, 1-Channel Isolating Switching Repeater, Relay Output, 24VDC
    178,50 € *
    Go to item
    • : 11 - 13 Workdays  (DE - int. shipments may differ)
    Temperature Measuring Transducer MU125M with Universal Input
    Temperature Measuring Transducer MU125M with Universal Input
    SKU:
    MU125M
  • Universal input for Pt100, Pt1000, thermocouple, NTC and resistance measuring value
  • Configuration via front DIP switches
  • Analog actual value output 4-20mA
  • Zero point and limit value can be adjusted via trim potentiometers on the front
  • With Pt100 and Pt1000 sensors, monitoring of sensor break and short-circuit
  • Wide-range mains adapter: 20-125VDC snd 20-253VAC
  • Removable coded screw terminals
  • Housing width 12.5 mm
  • Carrier rail mounting TS35 EN60715
    • Senseca
    Temperature Measuring Transducer MU125M with Universal Input
    188,02 € *
    Go to item
    • : 11 - 13 Workdays  (DE - int. shipments may differ)
    M1, Digital LED Panel Meter, 4-Digits, with Universal...
    M1, Digital LED Panel Meter, 4-Digits, with Universal Measuring Input, 48 x 24mm²
    SKU:
    M1-7UR4A.000X.372AD
  • universal measuring input for DC voltage, DC current, Pt100(0), thermocouple, frequency, rotational speed, counter
  • red display of -1999 to +9999 eigits
  • low installation depth 
  • digit heigth 10mm
  • Min/max- walue capture
  • 5 parameterizable support points
  • indicator flashes when the limit valus are exceeded
  • tare function
    • PSE Priggen
    M1, Digital LED Panel Meter, 4-Digits, with Universal Measuring Input, 48 x 24mm²
    189,57 € *
    Go to item
    • : 8 - 10 Workdays  (DE - int. shipments may differ)
    N30H, Panel Meter for DC Current and DCVoltage, 96 x 48mm
    N30H, Panel Meter for DC Current and DCVoltage, 96 x 48mm
    SKU:
    N30Hff
    Variations in:
    • Supply Voltage / Output Option
    • Measurement: current and DC voltage up to 5A and 600V
    • Three-colour display (14mm high), programmed in three intervals of the measured value
    • Meter programming from the keyboard or through the RS-485 interface by means of the free delivered eCon software
    • Four alarm outputs with signalling by LED diodes, operating in 6 different modes
    • Conversion of any measured value into a 0/4...20mA, or 0...10V analog signal
    • Storage of minimal and maximal values for all measured quantities
    • 21-point individual characteristic for the measured value
    LUMEL
    N30H, Panel Meter for DC Current and DCVoltage, 96 x 48mm
    195,86 € - 289,94 € *
    Go to item
    TS500-2R-0, 2-Channel Isolating Switching Repeater, 2...
    TS500-2R-0, 2-Channel Isolating Switching Repeater, 2 Relay Outputs, 230VAC
    SKU:
    TS500-2R-0
  • Inputs for switching contact, proximity switch Namur type acc. to DIN EN 60947-5-6 or opto-coupler
  • Switchable line fault detection for broken and shorted lines
  • Output relays SPDT contact
  • Supply voltage 230VAC
  • Power on LED, status / error LED
  • 22.5mm case for DIN rail mounting
    • Senseca
    TS500-2R-0, 2-Channel Isolating Switching Repeater, 2 Relay Outputs, 230VAC
    197,54 € *
    Go to item
    • : 11 - 13 Workdays  (DE - int. shipments may differ)
    TS500-2R-5, 2-Channel Isolating Switching Repeater, 2...
    TS500-2R-5, 2-Channel Isolating Switching Repeater, 2 Relay Outputs, 24VDC
    SKU:
    TS500-2R-5
  • Inputs for switching contact, proximity switch Namur type acc. to DIN EN 60947-5-6 or opto-coupler
  • Switchable line fault detection for broken and shorted lines
  • Output relays SPDT contact
  • Supply voltage 24VDC
  • Power on LED, status / error LED
  • 22.5mm case for DIN rail mounting
    •
    Senseca
    TS500-2R-5, 2-Channel Isolating Switching Repeater, 2 Relay Outputs, 24VDC
    197,54 € *
    Go to item
    • : 11 - 13 Workdays  (DE - int. shipments may differ)
    Best sellers
    TS500-Ex-2R-5, 2-Channel Isolating Switching Repeater, 2...
    TS500-Ex-2R-5, 2-Channel Isolating Switching Repeater, 2 Relay Outputs, 24VDC
    SKU:
    TS500-Ex-2R-5
  • Inputs for switching contact, proximity switch Namur type acc. to DIN EN 60947-5-6 or opto-coupler
  • Inputs intrinsically safe acc. to ATEX II (1) G [Ex ia] IIC/IIB, ATEX II (1) D [Ex iaD]
  • Switchable line fault detection for broken and shorted lines
  • Output relays SPDT contact>
  • Supply voltage 24VDC
  • Power on LED, status / error LED
  • 22.5mm case for DIN rail mounting
    • Senseca
    TS500-Ex-2R-5, 2-Channel Isolating Switching Repeater, 2 Relay Outputs, 24VDC
    197,54 € *
    Go to item
    • : 11 - 13 Workdays  (DE - int. shipments may differ)
    CVT500, Current and Voltage Transmitter
    CVT500, Current and Voltage Transmitter
    SKU:
    CVT500-1/5-125/250ff
    Variations in:
    • Supply Voltage
  • Measuring input for DC and sinusoidal AC signals
  • Arithmetic average value measurement RMS calibrated
  • Frequency range 40...200Hz
    • Senseca
    CVT500, Current and Voltage Transmitter
    199,92 € *
    Go to item
    LED Bargraph Display, Horizontal, 96 x 24mm
    LED Bargraph Display, Horizontal, 96 x 24mm
    SKU:
    MB1-33RHOff
    Variations in:
    • Supply Voltage
    Item weight:
    0,09 kg
    • 30 segments bargraph display
    • horizontal front panel mounting, 24 x 96mm 
    • segment colour: red/green selectable, optionally blue/red, orange/green 
    • small mounting depth: 60mm without the pluggable screw terminal
    • parametrization via HEX switch and  push button 
    • factory preadjusted input for standard signal 0 to 10V and 0/4 to 20mA 
    • free adjustment at the input signal possible 
    • 8 different types of presentation, parametrizable as bar, dot/point or curtain  
    • free direction selection and central display (for example, beams out of the centre) 
    • stepwise brightness control 
    • protection rate IP65 on the front
    • plug-in screw terminal
    PSE Priggen
    LED Bargraph Display, Horizontal, 96 x 24mm
    207,06 € *
    Go to item
    Limit Value Switch GS125M-1-1-00 with Universal Input and...
    Limit Value Switch GS125M-1-1-00 with Universal Input and Wide-Range Mains Adaptor
    SKU:
    GS125M-1-1-00
  • universal input for industry standard signals, Pt100, thermocouple and potentiometer
  • 1 relay output
  • adjustable min/max contact function 
  • 2-colour illuminated  scales for limit value adjustment
  • monitoring of sensor break and short-circuit with Pt100 sensors
  • wide-range mains adaptor
  • functional safety up to SIL2
  • housing width only 12.5mm
  • removable coded terminals
  • carrier rail mounting TS35 EN60715
  • safe galvanic isolation between input/output and auxiliary voltage
    • Senseca
    Limit Value Switch GS125M-1-1-00 with Universal Input and Wide-Range Mains Adaptor
    209,92 € *
    Go to item
    • : 11 - 13 Workdays  (DE - int. shipments may differ)
    Best sellers
    ND10, Inexpensive 3-Phase Panel Multimeter, 96 x 96mm
    ND10, Inexpensive 3-Phase Panel Multimeter, 96 x 96mm
    SKU:
    ND10ff
    Variations in:
    • Input Current
  • Measurements of up to 52 mains network parameters
  • Power supply via the measuring circuit
  • The displays take into account the values of programmed transformation ratios for upstream instrument transducers
  • Modbus RS-485 communication interface
  • Free eCon software
  • Two alarm outputs
  • Pulse output
  • Backlit 3.5" LCD display
  • 3 years warranty
    • LUMEL
    ND10, Inexpensive 3-Phase Panel Multimeter, 96 x 96mm
    212,13 € *
    Go to item
    Best sellers
    TV500L-110-0 Isolating Signal Converter, Input 0/2-10V...
    TV500L-110-0 Isolating Signal Converter, Input 0/2-10V und 0/4-20mA, Output: -10-10V and -20-20mA, 230VAC
    SKU:
    TV500L-110-0
    Item weight:
    0,15 kg
    • full 3-port isolation
    • input: 0/4...20mA and 0/2...10VDC
    • output -20...+20mA and +10...+10VDC
    • increasing output characteristic
    • supply voltage: 230VAC
    • power-on LED
    • 22,5mm case for DIN rail mounting
    Senseca
    TV500L-110-0 Isolating Signal Converter, Input 0/2-10V und 0/4-20mA, Output: -10-10V and -20-20mA, 230VAC
    220,15 € *
    Go to item
    • : 11 - 13 Workdays  (DE - int. shipments may differ)
    TV 500L-110-5, Isolating Signal Converter for DIN Rail...
    TV 500L-110-5, Isolating Signal Converter for DIN Rail Mounting, Input 0/2-10V and 0/4-20mA, Output: -10-10V and -20-20mA, 24VDC
    SKU:
    TV500L-110-5
    Item weight:
    0,15 kg
    • full 3-port isolation
    • input: 0/4...20mA and 0/2...10VDC
    • output -20...+20mA and +10...+10VDC
    • increasing output characteristic
    • supply voltage: 24VDC
    • power-on LED
    • 22,5mm case for DIN rail mounting
    Senseca
    TV 500L-110-5, Isolating Signal Converter for DIN Rail Mounting, Input 0/2-10V and 0/4-20mA, Output: -10-10V and -20-20mA, 24VDC
    220,15 € *
    Go to item
    • : 11 - 13 Workdays  (DE - int. shipments may differ)
    GIA 0420 N-ex, Freely Scalable LCD Display for 4-20mA...
    GIA 0420 N-ex, Freely Scalable LCD Display for 4-20mA Signals, with EX Protection, Self-Supplying
    SKU:
    GIA0420N-ex
  • With EX protection for all potentially explosive atmospheres
  • Time-saving on-site scaling without the need of tools within seconds
  • Highest operation security by integrated self-diagnosis and watchdog funktion
  • Large display range of -1999 to 9999 digits
  • High accuracy and minimum temperature offset by integrated self-calibration
  • Monitoring for sensor breakings, sensor short circuit, low and high range excess
  • Connectable software filter guarantee a  steady reading also with noisy sensor signals
    • Senseca
    GIA 0420 N-ex, Freely Scalable LCD Display for 4-20mA Signals, with EX Protection, Self-Supplying
    253,47 € *
    Go to item
    • : 11 - 13 Workdays  (DE - int. shipments may differ)
    Isolating Signal Converter TV500
    Isolating Signal Converter TV500
    SKU:
    TV500-10-ff
    Variations in:
    • Auxiliary Voltage
    Item weight:
    0,20 kg
  • Inputs: 0/4...20mA  or 0/2...10VDC, each selectable 
  • Outputs: 0/4...20mA  or 0/2...10VDC, each selectable 
  • Auxiliary voltage: 100...265VAC or 10.8...30VAC/DC
    • Senseca
    Isolating Signal Converter TV500
    261,80 € *
    Go to item
    TFT1-11, TFT- Indicator for Panel Mounting, Universal...
    TFT1-11, TFT- Indicator for Panel Mounting, Universal Inputs, 96x48mm
    SKU:
    TFT1-11ff
    Variations in:
    • Power supply
  • presentation of metered value of -1999…9999 digits
  • digit height approx. 15mm
  • selectable colour for measurand and background: red, green, white, black, orange
  • minimal installation depth: 25mm without plug-in terminal, with transformer 42 mm
  • display panel 2,4", 320x240 pixels
  • display of metering point description and signal description
  • adjustable signs for physical dimensions
  • min/max value recording
  • 9 adjustable supporting points
  • display flashing at threshold value exceedance/undercut
  • tara function
  • programming interlock via access code
  • protection class IP65 at the front
  • pluggable screw terminal
  • 2 switching points (changer)
  • option: interface RS485 with Modbus protocol
  • accessories: PC-based configuration kit PM-TOOL with CD & USB adapter
    • PSE Priggen
    TFT1-11, TFT- Indicator for Panel Mounting, Universal Inputs, 96x48mm
    267,75 € - 279,65 € *
    Go to item
    TFT1-13, Triple TFT Display for Panel Mounting,...
    TFT1-13, Triple TFT Display for Panel Mounting, 96x48mm²
    SKU:
    TFT1-13ff
    Variations in:
    • Auxiliary voltage
  • TFT display with standard signal inputs
  • presentation of readings via 3x -1999…9999 digits
  • digit height approx. 9 mm
  • selectable colour for measurand and background: red, green, white, black, orange
  • minimal installation depth: 25 mm without plug-in terminal, with transformer 42 mm
  • display panel 2,4", 320x240 Pixel
  • adjustable signs for physical dimensions
  • min/max value recording
  • 9 adjustable supporting points
  • display flashing at threshold value exceedance/undercut
  • Tara function
  • programming interlock via access code
  • protection class IP65 at the front
  • pluggable screw terminal
    • PSE Priggen
    TFT1-13, Triple TFT Display for Panel Mounting, 96x48mm²
    267,75 € - 279,65 € *
    Go to item
    P30O, Messumformer für Impulse, Umdrehungen,...
    P30O, Messumformer für Impulse, Umdrehungen, Frequenz, Laufzeit
    SKU:
    P30Off
    Variations in:
    • Variant
    • 2 universal measuring inputs for sensors with pulse outputs
    • Input, output signals and power supply galvanically isolated
    • Output standard: 0/4-20mA
    • Relay output
    • 24VDC output for ext. sensor
    • Supply voltage: 85-253VDC/AC
    LUMEL
    P30O, Messumformer für Impulse, Umdrehungen, Frequenz, Laufzeit
    271,44 € - 345,46 € *
    Go to item
    ND20Lite, 3-Phasen- Einbau- Messgerät für...
    ND20Lite, 3-Phasen- Einbau- Messgerät für Stromnetz- Parameter, 96 x 96mm
    SKU:
    ND20LITE
  • Measurements of  mains network parameters
  • Programmable input current range: 1A or 5A
  • Programmable input voltage range: 3 x 57.7/100V,  3 x 69.3/120V or 3 x 230/400V
  • Power supply via the measuring circuit
  • High accuracy class
  • The displays take into account the values of programmed transformation ratios for upstream instrument transducers
  • Modbus RS-485 communication interface
  • One alarm output
  • Pulse output
  • Backlit 3.5" LCD display
  • 3 years warranty
    • LUMEL
    ND20Lite, 3-Phasen- Einbau- Messgerät für Stromnetz- Parameter, 96 x 96mm
    282,23 € *
    Go to item
    • : 11 - 13 Workdays  (DE - int. shipments may differ)
    Best sellers
    GMUD MP-, Pressure Measuring Transducer
    GMUD MP-, Pressure Measuring Transducer
    SKU:
    GMUD MP-ff
    Variations in:
    • Measuring Range:
    Item weight:
    0,28 kg
  • freely scalable
  • selectable 4-20mA / 0-10V
  • with display
  • switching output
    • Senseca
    GMUD MP-, Pressure Measuring Transducer
    268,94 € - 357,00 € *
    Go to item
    GRHU...MP, Air Humidity Transducer
    GRHU...MP, Air Humidity Transducer
    SKU:
    GRHUff
    Variations in:
    • Variant:
  • measuring range: 0.0 ... 100.0% RH
  • with/without on-site display
  • output ranges freely scalable
  • adjustment by operator possible
  • available output signals: 4-20 mA, 0-1 V or 0-10 V
    • Senseca
    GRHU...MP, Air Humidity Transducer
    270,13 € - 289,17 € *
    Go to item
    Universal Isolating Signal Converter ST500-10-0, 230VAC
    Universal Isolating Signal Converter ST500-10-0, 230VAC
    SKU:
    ST500-10-0
    Item weight:
    0,11 kg
  • Wide supply voltage range: 100 ... 265V AC
  • Electrically isolated: between input / output / supply voltage
  • 22.5 mm standard case for rail mounting TS35
  • Universal inputs/outputs for (0)4 ... 20 mA and 0(2) ... 10 V
    • Senseca
    Universal Isolating Signal Converter ST500-10-0, 230VAC
    290,36 € *
    Go to item
    • : 11 - 13 Workdays  (DE - int. shipments may differ)
    Universal Isolating Signal Converter ST500-10-5, 24V AC/DC
    Universal Isolating Signal Converter ST500-10-5, 24V AC/DC
    SKU:
    ST500-10-5
    Item weight:
    0,11 kg
  • Supply voltage range: 10.8 ... 30V AC/DC
  • Electrically isolated: between input / output / supply voltage
  • 22.5 mm standard case for rail mounting TS35
  • Universal inputs/outputs for (0)4 ... 20 mA and 0(2) ... 10 V
    • Senseca
    Universal Isolating Signal Converter ST500-10-5, 24V AC/DC
    290,36 € *
    Go to item
    • : 11 - 13 Workdays  (DE - int. shipments may differ)
    P30U, Universal Transducer for Temperature and Standard...
    P30U, Universal Transducer for Temperature and Standard Signals
    SKU:
    P30Uff
    Variations in:
    • Variant
    • Universal measuring input, programmable
    • Input,  output signals and power supply galvanically isolated
    • Internal data memory for 534.336 samples
    • Output standard signal variants: 0/4-20mA
    • 2 Relay outputs
    • Supply voltage: 85-253VDC/85-300VDC
    LUMEL
    P30U, Universal Transducer for Temperature and Standard Signals
    293,88 € - 367,00 € *
    Go to item
    pH Head Transmitter PH40-2-2-00
    pH Head Transmitter PH40-2-2-00
    SKU:
    PH40-2-2-00
    • Measuring range: -1 to +15 pH
    • Head transmitter for measuring chains with S7/S8 connector
    • Output: 4-20mA = -1 to +15 pH
    • Zero point: pH 7,0
    • Slope: 59.2 mV/pH, uncompensated
    Senseca
    pH Head Transmitter PH40-2-2-00
    309,40 € *
    Go to item
    • : 11 - 13 Workdays  (DE - int. shipments may differ)
    Resistance Transmitter RT500
    Resistance Transmitter RT500
    SKU:
    RT500ff
    Variations in:
    • Supply Voltage
  • Resistance measuring range from 0 to 50 Ohm up to 100 kOhm 
  • 12 Bit AD/DA processor technology with 250Hz realtime execution 
  • Teach-in programming for initial and final value 
  • 2- and 3-wire connection
  • Outputs for 0/4-20mA, simultaneous 0/2-10V
  • Increase or decrease output characteristic programmable
  • Operation mode indicated by 2-colour LED
  • 22.5mm case for DIN rail mounting
    • Senseca
    Resistance Transmitter RT500
    309,40 € *
    Go to item
    GRMU 2000 MP, Redox Measuring Transducer with Electrical...
    GRMU 2000 MP, Redox Measuring Transducer with Electrical Isolation, without Electrode
    SKU:
    GRMU2000MP/BNC
  • measuring range: -2000 to +2000mV
  • accuracy: 0.2% FS
  • output signal: 4-20mA
  • electrode socket: BNC
    • Senseca
    GRMU 2000 MP, Redox Measuring Transducer with Electrical Isolation, without Electrode
    326,06 € *
    Go to item
    • : 11 - 13 Workdays  (DE - int. shipments may differ)