STL50-5-1R-5, Safety Temperature Limiter for Thermocouples, 24VDC

Item number: STL50-5-1R-5

  • Useful as temperature limiter/-guard and exhaust gas temperature limiter
  • Input for double thermocouples type J, K, N and S 
  • Auxiliary voltage: 24VDC
  • Alarm output: 1 relay SPDT
  • Programming via backlit LCD graphic display
  • Certified according to DIN EN 14597 SIL 2
  • Category: Limit Monitors


    660,45 €

    including 19% VAT.

    Exp. shipping time: ca. 1-2 weeks

    : 5 workdays

    pc.


    Description

    STL50-5-1R-5, Safety Temperature Limiter for Thermocouples, 24VDC

    For thermocouples of the types J, K, N and S, certified to DIN EN 14597 (replaces DIN 3440), SIL 2.
     
    Features
    •     For use as:
            STB     Protection -  temperature limiter
            ASTB   Exhaust gas protection -  temperature limiter
            STW    Protection -  temperature monitor
    •     Certified according to EN 61508 SIL2
    •     Input: double thermocouple J, K, N and S
    •     Temperature limit value and switching hysteresis programmable
    •     Basic accuracy: < 0.5% ± 2 digits
    •     Reaction time: = 0.5 sec
    •     Alarm output: 1 relay, CO; SPDT
    •     Clear text programming via graphic display 128x64 pixel,
          with white background lighting
    •     Memory function for error report
    •     Operation-lock feature (password protection)
    •     Case for switchboard installation
     
    General:
    The STL50 safety temperature limiter is used where ever thermal processes must be monitored and the system must be transferred into a safe operational state in case of fault. If the permissible temperature limit value is reached, or if a fault occurs within the permissible temperature range on the monitoring equipment (sensor open, sensor short-circuit, failure of a component part in the device, fault in the software, failure or inadmissible value of the Supply voltage etc.), the STL50 switches off without delay.
    The alarm contact is activated, the LED ALARM on the front panel and the back-lighting of the display light up, and the error cause is indicated as plain text on the display.
    In addition, there is a 24 V DC signal present on the terminals 17-18 for an external alarm signal.
     

    Brief description:
    Programming:  The device is programmed using the front side buttons, in connection with the graphics display.
    Operating modes:  The device can be used as:
              STB ?    Maximum or minimum monitoring with lock
                              Reset following removal of the fault through actuation of the front-sided button
                              or externally connected pushbutton
              ASTB ? As before, however for the monitoring of the exhaust gas temperature
              STW  ?  Maximum or minimum monitoring without lock
                              Reset automatically on return into the permissible range
    Switching hysteresis: Always acts in the direction of safe range.
    Error log memory: The last fault is stored as plain text and can be called up in the working level and deleted.
     
    Temperature probe: Attention: The device may be operated only with temperature probes which are certified according to DIN EN 14597

    Technical data:
    Housing: DIN rail mounting TS35
                      Floor space: 50x100 mm² (BxH)
                      Mounting height: 110 mm
    Input thermocouples: 
                   J (Fe-CuNi): -100.0 to +800.0 °C
                   K (NiCr-Ni): -150 to +1200 °C
                   N (NiCrSi-NiSi): -150 to +1200 °C
                   S (Pt10Rh-Pt): 0 to +1600 °C
    Output: relay, 1 x CO contacts
    Supply voltage: 24 VDC ± 15 %

    Please note: Sensors need to be ordered separately!

    Ratings (0)

    Average product review

    Write your first review and help others with their purchase decision: