GMUD MP-, Pressure Measuring Transducer 0-150 mbar rel.

Item number: GMUD MP-S-MBS

  • freely scalable
  • output switcheable4-20mA / 0-10V
  • with display
  • switching output
  • Category: Measuring Transducers

    292,74 €

    including19% VAT.

    Exp. shipping time: ca. 1 week

    : 7 workdays



    GMUD MP-S-MBS, Pressure Measuring Transducer 0-150mbar rel.

    Microprocessor controlled digital pressure transducer with display and operation via 3 buttons.
    With freely scalable analog output that can be toggled between 4-20 mA and 0-10 V.
    • freely scalable
    • output switcheable4-20mA / 0-10V
    • with display
    • switching output

    Area of application:
    + air and non-aggressive gases
    +controlling, measuring and monitoring
    +climate and ventilation
    +environmental and medical technology

    Types of pressure:
    Relative pressure (reference atmosphere or ambient pressure) for over/under pressure measurements and pressure difference measurements (sensor displaying zero when coming into contact with atmospheric or ambient pressure).
    Technical data:
    Sensor element: piezoresistive pressure sensor with integrated temperature compensation
    Measuring range: 0-150mbar rel
    Bursting pressue: max. 1500mbar
    Typ. accuracy: GMUD MP-S: 0.15% FS (lin.),
    0.6% FS (hysteresis and
    temperature 0 ... 70C)
    GMUD MP-F: 0,35% FS (lin.),
    0,6 %FS (hysteresis and
    temperature 0 ... 70C)
    Output signal: 4 ... 20mA / 0 ... 10V (selectable in menu)
    Auxiliary energy: only needed if 0...10V output signal is
    selected (18 ... 30VDC / 24VAC)
    Permissible burden: (4 ... 20mA): Ra[O] = (Uv [V] - 12 [V]) / 0.02A
    Permissible load: (0 ... 10V): >= 3000 Ohm
    Operating temperature: -20 ... +70C
    Storage temperature: -40 ... +70C
    Display / operation: 4-digit 7-segment display and 3 buttons
    Pressure connection: universal pressure connecting pieces for 6 x 1mm or 8 x 1mm plastic tubes (4 or 6 mm inner pipe diameter)
    Mounting position: any position (small influence of mounting position for low ranges)
    Housing: ABS (IP65), with fi xing holes for wall mounting
    (accessible after cover has been removed)
    Electric connection: elbow-type plug acc. to EN 175301-803/A (IP65);
    max. wire cross section: 1.5mm ,
    wire/cable : 4.5mm to max. 7mm
    LACK: card coated on both sides (for outdoor application)
    OUT: switching output (max 28V, 40mA), switches if meas. value falls below or exceeds limit value connection via 2nd elbow-type plug

    Ratings (0)

    Average product review

    Write your first review and help others with their purchase decision: