• 30 segments bargraph display
• vertical front panel mounting, 24 x 96mm 
• segment colour: red/green selectable, optionally blue/red, orange/green  
• small mounting depth: 60mm without the pluggable screw terminal
• parametrization via HEX switch and  push button 
• factory preadjusted input for standard signal 0 to 10V and 0/4 to 20mA 
• free adjustment at the input signal possible 
• 8 different types of presentation, parametrizable as bar, dot/point or curtain  
• free direction selection and central display (for example, beams out of the centre) 
• stepwise brightness control 
• protection rate IP65 on the front
• plug-in screw terminal

• Measurement of voltage, a.c. current or frequency
• Three-colour LED display (5 digits, 14 mm high)
• Digital output RS-485 - Modbus RTU protocol.
• Two alarm outputs of OC type.
• Programmable parameters through RS-485 interface using the free eCon software

• Panel mounting
• Universal input (measurement of temperature and standard signals)
• New range for DC voltage measurements: ±75mV
• Relay alarm output
• Universal power supply from 24 to 230VAC/DC
• Supply output for external transducers: 24VDC
• OLED graphic display, horizontally or vertically configurable
• Configuration of the meter via mini USB interface via the free eCon software

• Measurement: current and DC voltage up to 5A and 600V
• Three-colour display (14mm high), programmed in three intervals of the measured value
• Meter programming from the keyboard or through the RS-485 interface by means of the free delivered eCon software
• Four alarm outputs with signalling by LED diodes, operating in 6 different modes
• Conversion of any measured value into a 0/4...20mA, or 0...10V analog signal
• Storage of minimal and maximal values for all measured quantities
• 21-point individual characteristic for the measured value

• Voltage measurement ±600V (maximum range display ±1200V), current measurement via shunt, power, energy and capacity measurement of DC circuits
• two-line LCD display with high contrast and built-in backlighting
• possibility of displaying the measured value and time simultaneously or an second measured value or unit (automatically displayed unit of measured quantity)
• Wide range of voltage measurement at the shunt input up to 1500 mV
• high sampling frequency of measured signals
• programming parameters via buttons or RS-485 interface and free e-con software
• 4 alarm outputs with signaling on LEDs, working in 7 different modes (option)
• pulse output to control energy consumption
• conversion of any measured value into an analog signal 0/4-20 mA or 0-10V (option)
• memory of minimal and maximal values for all measured quantities
• automatic voltage measurement compensation function
• Mounting dimensions: 96 x 48 x 93mm

• Measurement of single-phase network parameters: voltage, current, active, reactive and apparent power, cos phi, tan phi, frequency, active, reactive and apparent energy, active power 15 minutes, voltage 10 minutes
• Current and voltage harmonics analysis up to 51st (measurements available via RS-485). 
• Two-line LCD display with high contrast and built-in backlighting
• Possibility of displaying the measured value and time simultaneously or an second measured value or unit (automatically displayed unit of measured quantity)
• Programmable measuring range (current 1 A / 5 A and voltage 100 V /230 V / 400 V) 
• High sampling frequency of measured signals
• Programming parameters via buttons or RS-485 interface and free e-con software
• 4 alarm outputs with signaling on LEDs, working in 7 different modes (option)
• Possibility to program each of the alarms to react to a different measurements 
• Pulse output to control energy consumption
• Conversion of any measured value into an analog signal 0/4-20 mA or 0-10V (option)
• Memory of minimal and maximal values for all measured quantities
• Mounting dimensions: 96 x 48 x 93mm

• Multi-purpose input for measuring: temperature, resistance, standard signals
• Two-line LCD display with high contrast and built-in backlighting
• Possibility of displaying the measured value and time simultaneously or an uncalculated quantity or unit (programmable unit of measured quantity)
• Meter programming from keyboard or through the RS-485 interface by means of the free eCon software
• 4 alarm outputs with signalling on LED diodes, working in 7 different modes (option)
• Conversion of any measured value into an analog signal 0/4...20 mA or 0...10 V (option)
• Storage of minimal and maximal values for all measured quantities
• Supply of object transducers
• 32-point individual characteristic for the measured value
• Mathematical functions for converting the measured value
• Mounting dimensions: 96 x 48 x 93mm

• Measurement of 54 parameters and harmonics up to the 63rd harmonic for current and voltage in symmetrically or asymmetrically loaded single-phase 2-wire systems and three-phase 3-or 4-wire systems.
• 3.5" colour TFT graphic display, 320 x 240 pixels, user-programmable arangement of parameters in the displays (8 parameters in each of the 10 display pages)
• Displays that take into account the values of the programmed turn ratios
• Memory for maximum and minimum values
• 2 configurable alarm outputs
• Function of the monitoring relays for alarm outputs, optional: analogue output 0/4-20mA and 2 Pt100 inputs
• Optional RS-485 interface - Modbus protocol
• Archiving of up to 32 measurement parameters in internal 8GB data memory (optional)
• Modern and user-friendly Ethernet 10/100 BASE-T'm interface (otpional):
• Protocol: MODBUS TCP/IP, HTTP, FTP, Services: Web servber, FTP  server, DHCP
• MQTT protocol for IoT applications
• Parameter programming via free eCon software
• Real time clock (RTC) with battery backup

• 28mm, 3 1/2-digit LCD display (max. 1999) with backlight
• Manual range selection
• hFE transistor test
• Capacity measurement up to 200µF
• Inductivity measurement up to 20 H
• Peak hold
• Temperature measurement using type-K probe
• Fast continuity test and diode test
• Auto power off and low battery indication
• Security: EN 61010-1; CAT III 1000V

• Automatic illuminated function keys and rotary switch
• Integrated powerful LED flashlight
• Bluetooth 4.0 interface for data transfer to Android or iOS smartphones
• TrueRMS measurements
• ACV, ACV+DCV, DCV measurement and Low Impedance (Lo Z)
• 3 5/6-digits measurement value display (max. 5999)
• LCD display with relative-value measurement and 42-segment bargraph
• Continuity with buzzer and diode test
• Data-Hold, Min, Max, Peak function and Duty Cycle (Hz / %)
• Heavy duty case, IP67 dust and waterproof
• Safety: EN 61010-1; CAT III 1000 V / CAT IV 600 V
• New App for "Vuzix" Augmented Reality Smart Glasses available

• 4 4/5 digit (55,000 counts) 3.7 "TFT graphic display (480x320 pixels)
• Up to 65 readings per second
• Internal data recording for up to 1000 measuring points
• Minimum, maximum and measured value hold function
• AVG average measurement and relative value function
• dB and dBm measuring function for ACV and DCV measuring range
• Dual function for simultaneous measurements of two measuring functions
• Diode test & continuity test
• RS-232 interface for data transmission
• Control and data transfer possible via SCPI protocol
• Safety: EN 61010-1; CAT I 1000V / CAT II 600V

• For conductors with a maximum diameter of 160mm
• Measuring ranges 30/300/3000 A AC switchable
• Flexible measuring coil, closure can be opened on one side
• Measurement in conjunction with an existing multimeter
• 1m connecting cable with 4mm banana plugs
• Touch protection

The kit contains:

• 30A AC/DC Large Jaw Current Clamp
• large bandwidth: DC to 100kHz
• BNC connector
• closed loop control system for better accuracy

• Low–battery indicator 
• Zero offset button
• BNC type connectors
• Screened lead for noise suppression