Best sellers
SKU:
MB1-33RVOff
Item weight:
0,09 kg
  • 30 segments bargraph display
  • vertical front panel mounting, 24 x 96mm 
  • segment colour: red/green selectable, optionally blue/red, orange/green  
  • small mounting depth: 60mm without the pluggable screw terminal
  • parametrization via HEX switch and  push button 
  • factory preadjusted input for standard signal 0 to 10V and 0/4 to 20mA 
  • free adjustment at the input signal possible 
  • 8 different types of presentation, parametrizable as bar, dot/point or curtain  
  • free direction selection and central display (for example, beams out of the centre) 
  • stepwise brightness control 
  • protection rate IP65 on the front
  • plug-in screw terminal
Best sellers
SKU:
TA018
Current Clamp 20A/60 A AC/DC with BNC plug
134,47 € *
  • : 1 - 3 Workdays  (DE - int. shipments may differ)
SKU:
MB-3ff
Variations in:
  • Mounting/auxiliary voltage
  • combo panel meter for 0-300VDC and 0-1ADC
  • red 3-digit digital display -199...999 digits (optional green display)
  • 30-points-bargraph tricolour
  • adjustable bargraph or dot operation or operation with permanent display of the midpoint
  • installation depth: 120 mm without plug-in screw terminal
  • version with multi voltage power supply: 100-240VAC/DC,
  • verison for low voltage supply: 10-40VDC /18-30VAC
  • display adjustment via factory setting or directly via sensor signal
  • min/max-memory with adjustable permanent display
  • 30 additional adjustable supporting points
  • display flashing at threshold value exceedance/undercut
  • zero key for the triggering of Hold, Tara, display change, setpoint setting, alarm actuation
  • flexible alarm system with adjustable delay times
  • volume metering (Totaliser)
  • mathematic functions like reciprocal value, root extraction, squaring and rounding
  • sliding averaging
  • programming interlock via access code
  • protection class IP65 at the front
  • plug-in screw terminal
  • In stock
    SKU:
    TA167
  • with BNC plugg for connection i.e. to an oscilloscope
  • jaws opening capacity:  max. 32mm
  • provides 10mA/A and 1mV/A for AC and DC currents
  • frequency range: DC to 20kHz
  • 320,11 € *
    • : 1 - 3 Workdays  (DE - int. shipments may differ)
    SKU:
    TA300
  • accessory for the differential oscilloscope PicoScope 4444
  • connection via D9 plug
  • with intelligent interface for identifying and powering the adaptor
  • measuring range: up ot 40A AC/DC, 300V CAT III
  • bandwidth: 100kHz
  • 403,41 € *
    • : 3 - 5 Workdays  (DE - int. shipments may differ)
    In stock
    SKU:
    TA019
    • Low–battery indicator 
    • Zero offset button
    • BNC type connectors
    • Screened lead for noise suppression
    168,98 € *
    • : 1 - 3 Workdays  (DE - int. shipments may differ)
    SKU:
    GIA0420N-ex
  • With EX protection for all potentially explosive atmospheres
  • Time-saving on-site scaling without the need of tools within seconds
  • Highest operation security by integrated self-diagnosis and watchdog funktion
  • Large display range of -1999 to 9999 digits
  • High accuracy and minimum temperature offset by integrated self-calibration
  • Monitoring for sensor breakings, sensor short circuit, low and high range excess
  • Connectable software filter guarantee a  steady reading also with noisy sensor signals
  • SKU:
    GIA0420N
  • Time-saving on-site scaling without the need of tools within seconds
  • Highest operation security by integrated self-diagnosis and watchdog funktion
  • Large display range of -1999 to 9999 digit
  • Big 10 mm high LCD display
  • Monitoring for sensor breakings, sensor short circuit, low and high range excess
  • Connectable software filter for a steady reading also with noisy sensor signals
  • 167,79 € *
    • : 11 - 13 Workdays  (DE - int. shipments may differ)
    SKU:
    MB1-33RHOff
    Variations in:
    • Supply Voltage
    Item weight:
    0,09 kg
    • 30 segments bargraph display
    • horizontal front panel mounting, 24 x 96mm 
    • segment colour: red/green selectable, optionally blue/red, orange/green 
    • small mounting depth: 60mm without the pluggable screw terminal
    • parametrization via HEX switch and  push button 
    • factory preadjusted input for standard signal 0 to 10V and 0/4 to 20mA 
    • free adjustment at the input signal possible 
    • 8 different types of presentation, parametrizable as bar, dot/point or curtain  
    • free direction selection and central display (for example, beams out of the centre) 
    • stepwise brightness control 
    • protection rate IP65 on the front
    • plug-in screw terminal
    SKU:
    M1-7UR4A.000X.372AD
  • universal measuring input for DC voltage, DC current, Pt100(0), thermocouple, frequency, rotational speed, counter
  • red display of -1999 to +9999 eigits
  • low installation depth 
  • digit heigth 10mm
  • Min/max- walue capture
  • 5 parameterizable support points
  • indicator flashes when the limit valus are exceeded
  • tare function