ebro EBI 12-TP226, Pressure &Temperature Logger
Bendable sensor for placement in the drain of the steam sterilizer.
Validation logger for thermal testing of processes and validation in steam sterilizers. The logger is characterized by its bendable metal sensors. The very thin temperature sensors with a diameter of 1.5 mm at the sensor tip enable a very fast response time. The data logger is often used to measure the temperature in the drain of the sterilizer while measuring the pressure at the same time.
Advantages:
- Measuring ranges: 0 to +150°C / 1 to 4,000mbar
- High temperature accuracy up to 0.1°C
- External temperature sensor, Ø1.5mm, radial
- Flexible metal sensor, 250mm long
- Internal pressure sensor
- Real-time data transmission
- Low response time
- Sterilizable data logger
Applications:
- Validation logger for measurements in steam sterilizers, RDG, RDG-E
- Measurement in the steam sterilizer drain
Technical data:
Operating temperature: 0°C to +150°C
Temperature measuring range: 0°C to +150°C
Pressure measuring range: 1 to 4,000mbar
Temperature accuracy: ± 0.1°C (0°C to +120°C)
± 0.05°C (+120°C to +140°C)
± 0.1°C (+140°C to +150°C)
Accuracy pressure: ±15mbar (1mbar to 49mbar)
±10 mbar (50mbar to 150mbar)
±15 mbar (151mbar to 2,049mbar)
±10 mbar (2,050mbar to 2,250mbar)
±15 mbar (2,241mbar to 2,999mbar)
±10 mbar (3,000mbar to 3,250mbar)
±15 mbar (3,251mbar to 3,499mbar)
±20 mbar (3,500mbar to 4,000mbar)
Temperature resolution: 0.01°C
Pressure resolution: 1mbar
Storage capacity: 2 x 33,440 readings
Temperature sensor: PT1000, class A, radial
Pressure sensor: Piezoresistive pressure sensor
Measurement interval: 250ms to 24h
Real-time data transmission: Yes
Storage temperature: -20°C to +70°C
Storage mode • Continuous measurement immediately
• Measurement after start time
• Measure immediately until memory is full
• Start / stop measurement
Battery: Lithium battery, 3.6V, replaceable by user
Dimensions: (Ø x H) 48mm x 24mm
Weight: Approx. 90g
Housing material: 316 L stainless steel / PEEK
Protection class: IP68
Factory calibration certificate: 0°C, +60°C and +134°C
100mbar and 3,100 mbar (at +25°C)
3,100 mbar (at +134°C)
Standards and guidelines:
• (EC) 1935/2004 Materials and articles that come into contact with food
• ISO 17665 Sterilization of healthcare products - Moist heat
• Directive 2014/53/EU
