ebro 4-Way Interface Kit SI 1200
The ebro interface set SI 1200 is suitable for programming and reading EBI 12 data loggers.
The set contains the 4-way interface IF 200, the Winlog.pro software, a USB cable and an antenna for radio communication. The colored LEDs on the interface indicate the status of programming, reading and any errors.
Please note that the interface set SI 1200 is specially designed for the EBI 12 series and is not compatible with other data logger models.
The EBI 12 data loggers can also be programmed and read wirelessly in the 2.4 GHz frequency range.
The interface is connected to a PC via a USB cable, controlled from there using appropriate software (e.g. "Winlog.pro") and usually also supplied with power from there. In the event that the PC cannot supply enough power for the interface, a separate power supply is available as an optional accessory.
To program and read the recorded data in standard mode, the data loggers are placed in the ports of the interface. To receive the data in radio mode, a powerful antenna must be connected to the interface.
The interface can be used in two different operating modes:
- in standard mode and
- in radio mode.
In standard mode, the interface is used to program data loggers or to read all the data collected in the data logger at once. One data logger can be programmed or read out per port of the interface.
In radio mode, the interface is used as a radio receiver. The interface continuously receives signals from data loggers that also work in radio mode and send their measurement data in time with their measurement. In radio mode, radio signals from up to 25 data loggers can be received and processed in parallel.
A colored LED signals programming, reading and incorrect execution.
Technical data:
Power supply: via USB (high-power USB) or external power supply Art.-No. AL 120
Wireless interface: 2.4GHz IEEE 802.15.4
USB port: Type B, 500mA
Operating temperature: -30 to +60°C
Storage: -40 to +60°C
Protection class: IP20
Dimensions: (L x W x H) 150 x 180 x 45mm
Housing material: ABS
Weight: approx. 358g
Approvals:
Wireless:
This device is tested according to ETSI EN
This device is tested according to CFR 47 Part 15
FCC rules and regulations: CFR 47 Part 15 Subpart B and C May 2007
FCC ID: VQ5-EBIIFXXX
It meets the requirements of Part 15, FCC rules.
This device has been tested according to RSS rules and meets the requirements:
RSS-Gen Issue 2, RSS-102 Issue 2, RSS-210 Issue 7
IC: 7412A-EBIIFXXX
Scope of delivery:
+ 4-way interface IF 300
+ Software Winlog.pro
+ USB connection cable
+ User manual
