PicoLog 1012 Kit, 12-Channel, 10 Bits USB Data Logger with Terminal Board

Item number: PP546

  • 12 voltage input channels (0 to +2.5V) per data logger
  • 10 bits resolution
  • 2 output channels per data logger
  • Use up to 4 data loggers at the same time
  • Up to 1 MS/s sample rate
  • Spare unit for ADC-11/10
  • USB connected and powered
  • Terminal Board (PP545), data acquisition software and SDK included
  • Category: Pico Technology Dataloggers


    177,31 €

    including19% VAT.

    Exp. shipping time: ca. 1 week

    : 9 - 10 workdays

    pc.


    Description

    PicoLog 1012 Kit, 12 Channel, 10 Bits USB Data Logger with Terminal Board

    • 12 input channels per data logger
    • 10 bits resolution
    • 2 output channels per data logger
    • Use up to 4 data loggers at the same time
    • Up to 1 MS/s sample rate
    • Spare unit for ADC-11/10
    • USB connected and powered
    • Terminal Board (PP545), data acquisition software and SDK included

    Designed to meet the needs of a wide range of general-purpose voltage, sensor and transducer logging applications, the PicoLog 1000 Multi-Channel DAQ Series feature independent software-configurable scaling and control outputs, an external terminal board for custom front-end circuitry and a choice of 10 or 12-bit input resolution.

    A distinguished pedigree
    The PicoLog 1000 Series is the result of a distinguished lineage that goes back to the release of our first multi-channel data logger- the ADC-11- in 1993. The original ADC-11, and its successor the USB ADC-11, proved to be the perfect choice for users wanting a low-cost way to measure and record multiple signals. The PicoLog 1000 Series builds on this success to give you the same low-cost data acquisition but with greater power and performance. (Because the ADC-11 was so popular we`ve also added a USB ADC-11 compatibility mode which allows you to use your PicoLog 1000 logger as a direct replacement to the USB ADC-11.)

    An expandable multi-channel data acquisition system
    The budget model PicoLog 1012 has 12 input channels. The powerful PicoLog 1216 has 16 input channels. Need more channels? No problem. Using PicoLog you can connect up to 4 Pico data loggers to one PC- giving you a potential 64 channel PicoLog 1000 Series data acquisition system, or the ability to use your PicoLog 1000 logger with other devices such as the USB TC-08 thermocouple data logger.

    Fast and accurate
    With 10 or 12-bit resolution and multiple sampling modes, a PicoLog 1000 Series logger will meet your data logging needs. The PicoLog 1000 Series has 3 sampling modes: continuous streaming allows channel voltage readings to be logged continuously at 1 kS/s on any number of channels, while real-time continuous sampling provides averaged, time-accurate readings with automatic measurements available in PicoLog. Block mode captures at the full 1 MS/s sample rate of the logger for the duration of the 8k sample buffer.

    Control alarms and other devices
    The PicoScope 1012 data loggers include 2 digital outputs. These outputs can be used to control alarms or other devices, additionally these can also be used to power sensors such as thermistors (outputs can be controlled using the programming API and cannot be controlled using PicoLog).

    It`s all you need
    Your PicoLog 1000 Series multi-channel data acquisition (DAQ) device includes all you need to start measuring and recording. A full suite of software is included in the price and consists of PicoLog data logging package, the PicoScope oscilloscope package and an SDK for using the PicoLog 1000 within your own software, or third party software such as LabVIEW.

    The supplied terminal board with its screw clamps enables the fast connection or disconnection of different sensors and input signals. There is also the possibility to solder resistors on the PCB as voltage dividers for higher input voltages.

    Easy to use. Low cost. The PicoLog 1000 Series is what you need
    With great performance and versatility, up to 16 inputs and 4 outputs per unit, a low per-channel cost and easy to use to features, the PicoLog 1000 Series is the multi-channel data acquisition device that you need.


    Technical data:

    Inputs
    Variant
    PicoLog 1012
    Maximum sampling rate
    Continuous streaming
    Real-time continuous
    Block mode#1

    100 kS/s single-channel
    1 kS/s or greater
    1 MS/s single-channel
    Buffer memory
    8000 samples, shared by all channels
    Analog inputs
    12#2
    Analog bandwidth (-3 dB)
    DC to 70 kHz
    Input type
    Single-ended, unipolar
    Input voltage range
    0 to +2.5 V
    Linearity (at 25 C)
    1 LSB
    Resolution
    10 bits
    Accuracy
    1%
    Overload protection
    30 V to ground
    Input coupling
    DC
    Input impedance
    1 MOhm
    Outputs
    Digital output (D0...D3)
    2
    Digital outputs (PWM)
    period
    duty cycle
    None
    Digital outputs (all)
    logic low voltage
    logic high voltage
    current limit

    100 mV (typical)
    3.3 V
    1 kOhm resistors in series with outputs
    Power output for sensors
    2.5 V @ 10 mA, current-limited
    PC Requirements
    Minimum


    Processor: Pentium II processor, or equivalent
    Memory: 64 MB (XP) / 512 MB (Vista) minimum
    Operating system: Microsoft Windows XP SP2 (32-bit), or Vista (32 or 64-bit)
    Ports: USB 2.0 compliant port
    Recommended

    Processor: 2 GHz Pentium IV processor, or equivalent
    Memory: 256 MB (XP) / 1 GB (Vista)
    Operating system: Microsoft Windows XP SP2 or later (32-bit), or Vista (32 or 64-bit)
    Ports: USB 2.0 compliant port
    Environmental
    For quoted accuracy
    20 C to 50 C
    General operation
    0 C to 70 C
    Relative humidity
    5% to 80% RH
    Physical Dimensions
    Dimensions
    45 mm x 100 mm x 140 mm (1.77" x 3.94" x 5.51")
    Weight
    <200 g (7.05 oz)
    Software
    PicoLog for Windows
    PicoLog data acqusition software can collect up to 1 million samples.
    Features include:
    Multiple views - view data as a graph, spreadsheet or text
    Parameter scaling - convert raw data into standard engineering units
    Math functions - use mathematical equations to calculate additional parameters
    Alarm limits - program an alert if a parameter goes out of a specified range
    IP networking - transfer measurements via a LAN or over the Internet
    PicoScope 6 for Windows
    PicoScope 6 is your complete test and measurement lab in one application.
    Features include:
    Capture modes - oscilloscope, spectrum and persistence modes
    Channel maths - calculate the sum, dfference, product, inverse or create your own custom function using standard arithmetic, exponential and trigonometric functions
    Automated measurements
    Scope mode: AC RMS, cycle time, DC average, duty cycle, falling rate, fall time, frequency, high pulse width, low pulse width, maximum, minimum, peak-to-peak, rise time and rising rate
    Spectrum mode: frequency at peak, amplitude at peak, total power, total harmonic distortion (THD), total harmonic distortion plus noise (THD+N), spurious-free dynamic range (SFDR), signal+noise+distortion to signal+noise ratio (SINAD), signal to noise ratio (SNR) and intermodulation distortion (IMD)
    Export data formats - Comma separated values (CSV), tab delimited (TXT), windows bitmap (BMP), graphics interchange format (GIF), portable network graphics (PNG), MATLAB 4 format (MAT)
    Software development kit
    A growing collection of drivers and example code for various programming languages including C/C++/C#, Visual Basic and LabVIEW.
    Language support
    Software
    PicoLog
    PicoScope 6

    English
    Full support for English, German and Spanish; menus only for French, Italian, Dutch, Hungarian and Simplified Chinese
    General
    Additional hardware (supplied)
    USB 2.0 cable, user manuals, software CD-ROM
    PC interface
    USB 2.0 - cable supplied
    I/O connector
    25-way D female
    Power requirements
    Powered from USB port
    Ground fault current protection
    0.9 A thermal self-resetting fuse
    Compliance
    CE (EMC) class A emissions and immunity
    FCC emissions
    RoHS compliant
    Warranty
    2 years

    #1 Block mode is supported by PicoScope and the PicoLog 1000 Series API, but not by PicoLog.

    #2 Except in USB ADC-11 compatibility mode


    resolution: 10 bit
    channels: 12-channel

    Ratings (0)

    Average product review

    Write your first review and help others with their purchase decision: