ADC-20 Kit, 8 Channel, 20 Bits Voltage Datal Logger for USB Port, with Terminal Board
- 20-bit resolution
- Accurate to within 0.1%
- Up to 4 true differential inputs
- Up to 8 single-ended inputs
- Fast conversion time
- Galvanic isolation from the PC to eliminate noise pickup
- Data acquisition software included
This high resolution PC hosted data logger offer the ultimate in precise and accurate readings.
Features such as true differential inputs, galvanic isolation and software selectable sample rates all contribute to a superior noise free resolution and make it ideal for capturing very low signal changes.
ADC-20 has to be connected to the USB port of a desktop or notebook computer and is powered from it.
By means of the supplied comfortable data logging PicoLog Software Über die mitgelieferte komfortable Datenlogger- Software PicoLog the user can record measured data, monitor, analyse them and also export them to applications of third party i.e. to MS Excel.
Data are performed as curves or as spreadheet and can be stored, zoomed and printed.
The supplied terminal board with its screw clamps enables the fast connection or disconnection of different sensors and input signals. There is also the possibility to solder resistors on the PCB as voltage dividers for higher input voltages.
This device is also available with an optional calibration certificate!
Download Data Sheet ADC-20/24 Series (1.0MB)
Technical data:Resolution: 20 bits
Number of channels: 4 differential inputs or 8 single-ended or any combination between
Conversion time per channel: 660ms, 340ms, 180ms, 100ms, 60ms
Input voltage ranges: ±2500 mV and ±1250 mV
Accuracy: 0.2% of the reading
Noise suppresion: typ. 120 @ 50/60Hz
Input impedance: differential: 2MOhms, single ended: 1MOhm
Overload protection: ±30V
Reference output:
+2.5V ±2.5mV @ 2mA; +5V ±1.0V @ 2mA; -5V ±1.5V @ 2mAInput connector: D 25 female
PC connection: via USB 1.1 or USB 2.0
Manufacturer warranty: 5 years
