TiePie WiFiScope WS6, 4-Channel, 16Bit, 250MHz WiFi Oscilloscope,

TiePie

TiePie WiFiScope WS6, 4-Channel, 16Bit, 250MHz WiFi Oscilloscope,

SKU: WS6ff

Category: Measuring Instruments

GTIN: 4069565000326

PC hosted 4-channel oscilloscope
Single-ended inputs
Triple connectivity: WiFi, Ethernet/LAN, USB 3.0
8, 12, 14, 16bit resolution, 0.25% DC vertical accuracy, 0.1% typical
Up to 1GSa/s sampling, up to 250MHz bandwidth
Up to 256MSa memory per channel
Up to 200MSs/s continuous streaming
1ppm time base accuracy

from

2.322,88 €

incl. 19% VAT , plus

pcs.

This item has variations. Please select the requested variation.

TiePie WiFiScope WS6, 4-Channel, 16Bit, 250MHz WiFi Oscilloscope

This powerful high speed WiFi oscilloscope combines fast sampling up to 1GSa/s with high resolutions of 12, 14 and 16bit and a large memory of 64MSa on all four single ended channels. The oscilloscope supports continuous streaming measurements up to 200MSa/s and can be synchronized with other oscilloscopes using the CMI interface to form a multi channel combined instrument with synchronized time base. The CMI interface is available by default on the WiFiScope WS6. Optionally, the WiFiScope WS6 can be delivered with SureConnect connection test and resistance measurement on each channel.

By means of the supplied comfortable software the WiFiScope WS56 can also be used as a multimeter, spectrum analyzer, data logger/transient recorder or protocol analyzer.

The WiFiScope WS6 is available in 3 models which differ in their sampling rate. They can be ordered with the options of an extended buffer memory, SureConnect feature, EMI pre compliance testing and with an extended warranty. (Please select when ordering!)

WiFiScope WS6 Model		1000	500	200
Max. sampling rate:		1GSa/s	500MSa/s	200MSa/s
Max. streaming rate:		200MSa/s	100MSa/s	40MSa/s
Max. record length:	standard model	1MSa	1MSa	1MSa
Max. record length:	XM option	256MSa	256MSa	256MSa

The flexibility and quality that the WiFiScope WS6 offers is unparalleled by any other oscilloscope in its class.

Rugged industrial design

The WiFiScope WS6 features a rugged design. Its enclosure is fitted with rubber protectors at the front and the rear. These protect the WiFiScope WS6 against damage by mechanical shocks. The rubber helps absorbing shocks and protects the connectors at the front and the rear of the WiFiScope WS6, these fall within the protected zone.

Additionally, the rubber prevents your WiFiScope WS6 from sliding. The rubber protectors have special notches that simplify stacking instruments. Holes are included that allow to connect a strap to hang the instrument near the test subject.

SureConnect Option

The SureConnect connection test feature of the WiFiScope WS6 tells you immediately whether your test probe or clip actually makes electrical contact or not. No more doubt whether your probe doesn't make contact or there really is no signal.

EMI pre compliance testing

The powerful capabilities of the WiFiScope WS6 - 1000XMES EMI analyzer give the user the possibility to quickly perform a good EMI compliance test. With this cost effective test, time and money are saved by avoiding extra visits to expensive EMC testing facilities. The supplied EMI probe set TP-EMI-HS6 contains three magnetic field (H field) probes and one electric field (E field) probe. The tripod ensures that the probes can be positioned properly at the object under test.

Multi instrument synchronisation

The WiFiScope WS6 is equipped with a sophisticated CMI synchronization bus, allowing to connect multiple WiFiScope WS6s to each other by means of TP-C50H Coupling cable CMIs, to use them as a combined and synchronized instrument. All instruments will measure at the same sample frequency (0ppm deviation!). Apart from a synchronization bus, the CMI also contains a trigger bus and a detection bus. The maximum number of instruments is only limited by the number available USB ports.

When the instruments are located further apart, yet have to be combined and synchronized, the Wireless Multi Instrument Synchronization Module WCMI can be used. The WCMI modules are connected to the extension port of the instruments and allow to synchronize instruments that are up to 400 m apart.

High accuracy

The WiFiScope WS6 measures with high resolutions of 14 and 16bit. A signal measured with the WiFiScope WS6 therefore has 256 times more resolution than most standalone oscilloscopes, which usually have a low resolution of 8 or 9bit. The high resolution of the WiFiScope WS6 precision oscilloscope allows for measuring signals with more accuracy, because the quantization error is much lower.

Large memory

When measuring at high sample rates, a long record length/large memory is necessary to be able to record a complete signal in the acquisition buffer. Where most oscilloscopes have 2.5kSa or 100kSa memory, the WiFiScope WS6 has up to 256MSa memory per channel, depending on the selected resolution and the number of active channels. When measuring at 14bit resolution and all four channels, the available memory is 32MSamples per channel. This gives the user 300 to 100000 times more memory. An advantage of a large memory is that once-only fast phenomena can be captured accurately or complete serial communication signal blocks can be measured all at once. For example complete serial communications, like CAN bus signals, can be measured all in one record to be reviewed and analyzed afterwards.

Bandwidth limit

It seems reasonable to assume that more bandwidth is better, but a wider bandwidth gives more noise. To reduce your noise you can switch on a bandwidth limiter for each channel individually of the WiFiScope WS6.

WiFi connected

Using a computer based oscilloscope was never easier than with the WiFiScope WS6 simply switch it on and start the software on the computer:

no power cables required as it is battery powered and can operate hours on a fully charged battery
no interface cables required as it uses WiFi to connect to the computer

This allows you to measure fully floating, fully isolated from your computer. The WiFiScope WS6 can be placed near any test subject that may be hard to reach, or on moving objects, where wired connections are not possible.

Because the WiFiScope WS6 is not connected to the computer, there is no risk of damaging the computer.

LAN connected

When measuring in remote locations where a wired network is available, the WiFiScope WS6 can also be used through its LAN port. Measurements can then be performed from any location via the network, without having the computer to be close to the test subject.

Using its 1 Gbit LAN connection, the WiFiScope WS6 can achieve higher streaming performance than via WiFi.

USB connected

When wireless measuring or LAN connected measuring is not required or not possible, the WiFiScope WS6 can also be connected via its USB port. This gives the benefit of even higher streaming performance.

Technical data:

For detailed specifications please download the data sheet: Data Sheet WiFiScope WS6

Download users manual: Manual WiFiScope WS6

Scope of delivery:

The WiFiScope WS6 is delivered with:

Carry case:	BB452
Instrument:	WiFiScope WS6
Probe:	4x Oscilloscope Probe 1:1-1:10 - HP-3250I
Accessories:	Handyscope / WiFiScope power supply USB3.0 cable, 1.5m long network cable, 3m long
Software:	for Windows 10 / 11, download via website
Drivers:	for Windows 10 / 11, download via website
Software Development Kit:	for Windows 10 / 11 and Linux, download via website
Manuals:	instrument manual and software user's manuals colour printed and digital, download via website