TP-CC400, Current Clamp Adaptor 40/400A AC/DC

SKU: TP-CC400

Category: Measuring Instruments

GTIN: 7423620651606

4 measuring ranges: 40A AC, 40A DC, 400A AC and 400A DC

Clamp opening: 20mm

Current value is converted into a voltage signal

143,87 €

incl. 19% VAT , plus

: 6 - 8 Workdays (DE - int. shipments may differ)

pcs.

: 6 - 8 Workdays (DE - int. shipments may differ)

TP-CC400, Current Clamp Adaptor 40/400A AC/DC

The Current clamp TP-CC400 is a current clamp that will allow your oscilloscope to measure electrical currents up to 400A AC/DC, with a frequency response up to 20kHz. When measuring with this current clamp, there is no need to break a closed circuit or to affect the isolation.

The wide jaws allow performing measurements on thick conductors.

For measuring DC current, a simple to operate zero adjust button is available.

The current clamp adapter provides a voltage signal proportional to the current for connection to an oscilloscope or data logger.

To connect the Current clamp TP-CC400 to your oscilloscope, a BNC to banana measure lead is required, which must be ordered separately. For oscilloscopes with differential inputs, the Measure lead TP-C812B is recommended. For oscilloscopes with single-ended inputs the Measure lead TP-BNCI-100 is recommended.

Technical data:

Electrical
Bandwidth:	DC to 20kHz (-3dB)
Effective measurement range:
40A range:	output 10mV/A, 400mV = 40A
400A range:	output 1mV/A, 400mV = 400A
Accuracy:
40A DC range:	±(3.5% + 6 digits) (0 - 20A) ±(4% + 10 digits) (20A - 40A)
400A DC range:	±(3.5% + 6 digits) (0 - 300A) ±(4.5% + 6 digits) (300A - 400A)
40A AC range:	±(4% + 10 digits) (0 - 20A) ±(5% + 10 digits) (20A - 40A)
400A AC range:	±(4.5% + 10 digits) (0 - 300A) ±(5% + 10 digits) (300 A - 400A)
Output connection:	cable with 2 shrouded 4mm female banana sockets

Dimensions
Captured conductor size:	max. 20mm
Weight:	240g
Height:	38mm
Length:	190mm
Width:	70mm
Length of cable:	30cm

Power Requirements
Power indicator:	Green LED
Auto power off:	Yes
Battery type:	Standard 9V IEC 6F22 cell
Battery life:	80 hours typical with alkaline
Low battery indication:	Red LED

Ambient
Operating Temperature:	0 to +50°C
Relative Humidity:	25 to 70% RH
Storage Temperature:	-20 to +70°C
Relative Humidity:	25 to 80% RH

Certifications and Compliances
CE mark compliance:	Yes
RoHS:	Yes