TGRF-4743, Tinytag Plus Radio Logger with 4 Voltage Inputs, 0-2,5VDC

Item number: TGRF-4743

  • 4 DC voltage input for low voltage monitoring 
  • 0 to 2.5VDC
  • Logging intervals from 2 minutes to 10 days
  • Local cache of 2 week?s readings (10min interval)
  • IP67 case
  • User replaceable alkaline battery
  • Typical range of 200m (line of sight)
  • Radio licence-free frequency: 869.88 MHz (EU version)
  • Self-configuring and easy to set up
  • Self-contained and battery powered
  • Low battery warning
  • Status LEDs
  • Fast access to information
  • Remote alarm signalling via e-mail
  • SMS messaging supported
  • Category: Gemini Tinytag Plus Radio Data Loggers


    428,40 €

    including 19% VAT.

    Exp. shipping time: ca. 2 weeks

    : 0 workdays



    Description

    TGRF-4743, 4-Channel Radio Logger for Low Voltage, 0-2.5VDC

    The TGRF-4743 monitors four voltages from 0 to 2.5VDC and can be connected to a variety of sensors enabling the logging of a wide range of processes.
    The data logger is waterproof and suitable for outdoor, industrial and warehousing applications.

    Typical applications:
    For custom sensor monitoring, including:
    • Pressure
    • Flow rate
    • Light
    • Power (with a current clamp)
    The logger will typically run for 12 months on its 2 AA alkaline batteries. (The 12 months operation is quoted for a typical 10 minute logging interval in a network with max. 25 radio loggers and at max. 25°C operational temperature).
    If required the unit can also be powered by an optional mains power supply.

    The unit is able to transmit logged data to another logger or a receiver and to store data locally in the event of radio contact  being temporarily lost.

    The data logger has got a status LED: 
    + LED off: logger is off
    + green every 4 sec.: everything is o. k.
    + red every 4 sec.: not meshed or battery low or alarm indication

    Please note: This article is only one component of the Tinytag Radio Logger System.
    For proper operation minimum one radio data logger and one Tinytag radio receiver with accompanying software are necessary!


    Features:
    • 4 DC voltage input for low voltage monitoring 
    • 0 to 2.5VDC
    • Logging intervals from 2 minutes to 10 days
    • Local cache of 2 week?s readings (10min interval)
    • IP67 case
    • User replaceable alkaline battery
    • Typical range of 200m (line of sight)
    • Radio licence-free frequency: 869.88 MHz (EU version)
    • Self-configuring and easy to set up
    • Self-contained and battery powered
    • Low battery warning
    • Status LEDs
    • Fast access to information
    • Remote alarm signalling via e-mail
    • SMS messaging supported
    • Cost efficient


    Technical data:
    Measuring range: 0 to 2.5VDC
    Logger accuracy: ±0.2% of the reading ±0.01V
    Logger resolution: better than 100µV
    Max. input voltage: 2.6V
    Input impedance: 100kOhm

    Radio frequency: 869.88MHz (EU version, AUS version upon request)
    Radio power: <5mW
    Radio range: 200m, typical (line of sight).
    Radio licence: no licence required
    Memory type: non volatile
    Logging interval: 2 minutes to 10 days
    Offline capacity: 2 weeks, at a typical 10 minute logging interval
    Alarms: 2 programmable latching alarms (upper and lower) per channel
    Low battery monitor: software warning
    IP Rating: IP67 water-proof
    Operational Range: -20°C to +55°C
    Case Dimensions: 241 x 155 x 62mm³ (h x w x d, including aerial)
    Weight: 554g (including aerial)

    This device is supplied with four voltage input cables CAB-3239.

    Optional accessories:

    ACSRF-4030-PK                         Tinytag Radio receiver plus Radio Explorer software
    ACS-9703                                    5-pin plug

    Ratings (0)

    Average product review

    Write your first review and help others with their purchase decision: