Safe and Sound Pro 2, Broadband RF Meter, 200MHz - 8GHz

Item number: SSP2

  • Inexpensive test receiver with a large bandwidth: 200MHz to 8GHz
  • Also detects the current 5G frequencies!
  • High receiver sensitivity
  • OLED display for precise readings: 0.01µW/m² to 2,500,000µW/m ²
  • High-quality signal sound reproduction, 3-level volume
  • Simultaneous display of peak, maximum and average values
  • Detection of very short pulses (<5µs)
  • LED traffic light display for readings evaluation
  • Every device comes with a NEMKO calibration certificate!
  • 3,5mm headphone jack
  • Connection for external power supply
  • 2 years warranty

Category: Brand New Products

449,90 €

including 19% VAT.

: 0 workdays



Safe and Sound Pro 2, Broadband RF Meter, 200MHz - 8GHz

This high-quality broadband receiver combines precise readings display with the acoustic analysis of the received signals and also ranks in the price range of less than € 500.
The sensitive receiver is able to measure potentially harmful high frequency/microwave radiation from continuous or digitally pulsed transmitter signals. The receiving antenna for this is integrated in the device. 
With the Safe and Sound 2 you can identify the sources of high frequency electromagnetic pollution in an environment and measure and identify them e.g. as
2G, 3G, 4G and 5G communication devices and stations as well as TETRA, DAB-T DECT, WiFi, Bluetooth  and Radar signals.
Of course, it is also possible to use this device to test the functionality of such transmission systems.
The immission values are given as power flux density in microwatts per square metre (µW/m²).
The device has a built-in loudspeaker with 3 switchable volume levels for acoustic analysis and identification.
Each RF signal source has its own unique sound characteristics.
In addition, the measured values obtained are evaluated using LEDs in traffic light colours according to building biology guidelines.
In this way, you can find out whether the readings are low, moderate, high or extremely high.
The operation of the meter is very easy.
Technical data:
Frequency range: Real-time analysis (±6dB) from 400MHz to 7.2GHz.
                                 Complete frequency range with limited accuracy: 200MHz to 10GHz
Measuring range: 0.001µW/m² to 2,000,000µW/m²
Sensitivity: 0.001µW
Detection of short pulses: < 5µs
Antenna: integrated in the device
Display: OLED, bar graph, PEAK, MAX and AVG at the same time
               4 LEDs in traffic light colours for evaluating the readings
Acoustic analysis: built-in speaker with 3 switchable volume levels
Headphone connection: 3.5mm headphone jack
Batteries: 2 x AA alkaline
Battery life: >15h with the speaker switched on
                      >18h with the speaker switched off
Continuous operation possible via optional 5V micro USB power supply.
Dimensions including bag: 17cm x 11cm x 4cm
Weight: 400g
Warranty: 2 years
Scope of delivery:
Safe and Sound Pro 2 meter, protective bag, user manual and NEMKO test certificate

Ratings (0)

Average product review

Write your first review and help others with their purchase decision: