HSF54, RF Shielding Paint for Indoor Use, 39-60dB

SKU: HSF54ff
Category: HF-Shields

shielding attenuation: 39 - 60dB

breathable

solvent free

low-odour and low-emission

colour: black, can be overpainted or overpapered

Container Size:: 1 Litre59,90 €

5 Litre249,90 €

from

59,90 €

incl. 19% VAT

Exp. shipping time: ca. 1 week

This item has variations. Please select the requested variation.

Description
Reviews

HSF54, RF Shielding Paint for Indoor Use, 39-60dB

Electrically conductive primer coating based on a high quality pure acrylic binder. Breathable, solvent-free, unplasticized, emmission-free. Suitable for widespread shielding of high-frequency radiation (HF) and low-frequency electric fields (LF).

Application:
Wall, ceiling and floor paint as shielding for electrosensitive people as well as for safety at work and operator protection against mobile phone Radar and other transmitter radiation. Bug-proof rooms, protection against data stealing with wireless data networks. EMC shielding of housings, rooms and vehicles.

For the safe shielding of electrical AC fields and deduction of electrostatic loads a grounding is necessary.

Attention, safety note:
The painted wall surfaces need to be grounded by qualified personnel. The electrical installation, especially the residual current operated circuit breaker , grounding and equipotential bonding of the concerned rooms need to be state of the art.

Technical data:

Shielding attenuation:

At a yield of 4 sqm/l:
At 1 GHz: Single layer 44 dB | Double layer 53 dB | Three layer 60 dB
At a yield of 8 sqm/l:
At 1 GHz: Single layer 39 dB | Double layer 46 dB | Three layer 51 dB

Up to 90 dB at 40 GHz

Perfect corrosion resistance: Most shielding products containing metal components are not adequately protected against corrosion. This shielding paint shields without metal particles using a mixture of carbons. Therefore it offers perfect corrosion resistance (no oxidizing) and long-term durability.

Underground: Interior and exterior: Excellent adhesion on various undergrounds like existing emulsion paints, sheetrock, wallpaper, cement, plaster, masonry, wood, etc.

Top coating: Preferably covered with plastic bonded, water-based emulsion paints, facade paints or silicon resin paints. Not applicable are pure mineral paints (clay, loam, chalk, silicate). Please find appropriate product recommendations in the technical data sheet. Due to the high adhesive tensile strength (to ETAG 004 for EIFS-systems, minimum 0.08 N/mm²), applicable directly under pure organic plaster, no mineral pasters!

Grounding: Must be grounded! We recommend interior the grounding strap EB2 plus grounding set ESW or ESW+, for the exterior the fiber additive AF3 plus the grounding set ESA.

Ingredients: Pure acylic dispersion, graphite, water, carbon black, additives, preservative (MIT, BIT).

VOC content: 0.2 g/l (EU limit value for category A/a is 30 g/l as of 2010).

Sd-value: 0.1 m

PH-value: 8

Delivery sizes: 1 and 5 litres

Shelf live: 12 months

Typical coverage: interior 7.5 m²/l; exterior 5 m²/l.

Colour: Black

Adhesive pull strength: 2.3 N/mm²

Optional accessories:

Grounding accessories

Fibre additive AF3

The HSF55 shielding paint is made without conductive carbon fibres, so that they can be airlessly sprayed. For a crack bridging for a better grounding it can be mixed with the fibre additive AF3.

HSF54, RF Shielding Paint, Liquid, 1 Litre

Low- emission and vapour diffusion open special paint for widely shielding high frequency (RF) electromagnetic radiation, low frequency electrical AC fields and for discharging electrostatic fields. Contains only carbon, no metals.
To be processed with roll or paintbrush.
Adheres to all common indoor grounds after appropriate preparatory work and can be overpainted or overpapered.

HSF54 has low emission and is free of solvents, softening agents, ammonia, residual monomers, heavy volatile compounds or halogen organic compunds etc.

The shielding paint is supplied in containers of 1 litre or 5 litres volume in liquid state.

Technical data:
Shielding principle: Reflection via Carbon fibres
Shielding attenuation: 42 - 38dB @ 200 MHz to 10 GHz, depending on coat thickness, one layer
Surface resistance: >1 Ohm/sqare
Consumption: ca. 7 m², depending on processing and ground
Processing: Paint brush, roll
Grounds: bearing, non- greasing grounds, indoors
Drying time: can be worked over after 12 h
Colour: black
Storage stability: unopened durable for ca. 12 months

Application:
Wall, ceiling and floor paint as shielding for electrosensitive people as well as for safety at work and operator protection against mobile phone Radar and other transmitter radiation. Bug-proof rooms, protection against data stealing with wireless data networks. EMC shielding of housings, rooms and vehicles.

Attention, safety notice:
The painted wall surfaces have to be grounded by qualified personnel. The electrical mains installation, particularly the earth leakage circuit breaker, grounding and equipotential bonding of the concerned rooms have to comply with the state of the technology.
For the grounding we recomend to use the EGP grounding plate and the cover and grounding tape AEB3.8, please see under: "Grounding Accessories"

Please select:

There are no reviews yet.