EZ-1X, Cheapest Simple Ozone Monitor, 0.02 - 0.14 ppm
EZ-1X, Simple, Inexpensive Ozone Monitor, 0.02 - 0.14 ppm
For monitoring ozone levels near small ozone generators. Ideal for light commercial applications such as bars and restaurants, hotels, photocopy centers, water bottlers, fumigation, research projects, light manufacturing, swimming pools, and residential and whereverozone exposure is possible.
For permanent on-site use and for portable work by field engineers and installers.
The EZ-1X has a fast and continuous response. It is rugged and versatile. There are no touchy controls.
Constantly monitors your work environment.
Ozone concentration shown by a multicolored graphical display.
No installation required. Easily understood by non-technical personnel.
- Nearly no maintenance necessary.
Field work and walk around analyses possible via power from internal rechargeable batteries.
Lowest cost. No alarm display, no analog output.
Range of applications:
Water treatment plants, paper factories, rooms with laser printers or photocopiers, laboratories, air pollution monitoring, leak detection with ozonizers.
Measurand: Ozone concentration in air
Measurement Principle: HMOS (heated metal oxide semiconductor) sensor.
Range: .02-.14 ppm of ozone, LED bargraph
Display: LED bargraph. Normally green. Yellow at .05 ppm (caution). Red at .1 ppm (danger).
Response time: Within 10s of seconds of the ozone reaching the sensor.
Rechargeable battery: 8h operation time without power supply connection
Sizes: 85 × 35 × 60 mm³ (3.25 × 1.375 × 2.375 in).
Weight: 154 gr (6 oz).
Power Requirements: 12-24 VDC at 300 mA. AC adapter supplied.
Battery: Self-contained NiMH. Approximately 8 hour capacity. Recharged by AC adapter overnight.