AMP Superseal 3-pin ACS Sensor Breakout Lead

Item number: TA267

Category: Automotive Diagnostics Accessories

49,98 €

including19% VAT.

Exp. shipping time: ca. 1 week

: 0 workdays



AMP Superseal 3-pin ACS Sensor Breakout Lead

This connector breakout lead enables you to take voltage readings from the numerous sensors and actuators in the engine compartment. Simply connect the breakout lead into the existing cable loom, and then take the output signal from the 4mm banana plugs into theautomotive oscilloscope using one of the TA125 to TA128 premium test leads. The breakout cable gives access to the individual wires to allow probing with current clamps. For example, this allows both injector current and injector voltage to be captured.

Note: The test lead is required to convert the 4mm banana plug connection on the connector breakout leads to a BNC connector suitable for plugging into the PicoScope.

Ratings (0)

Average product review

Write your first review and help others with their purchase decision: