ACS-5001, Audible Alarm Box for the Tinytag Dataloggers Plus 2 and View 2This audible alarm box is suitable for the connection to the data loggers Tinytag Plus 2 and Tinytag View 2 and emits an alarm tone after triggering.
The alarm can be programmed to sould only after a predetermined delay to allow work in the monitored areas.
Two potential-free contacts can be used to connect external devices, for example for SMS dial-up.
The device is equipped with a bracket for eay wall mounting.
Alarm: Single chirp every 2seconds when the logger the alarm box is connected to is in alarm state.
Warning at low battery: Three rapid chirps, once every minute
Programmable delay: 1s to 11 days
Relay output contacts: Two
Operational range: For indoor use only.
Operation temperature range: 0 to +50°C
Operation air humidity range: 0 to 90%, non-condensing
Housing dimensions: 122 x 79 x 32mm³ (L x H x W)
Weight: 165g, including battery
Interface cable length: 3m (supplied)
Battery: 9V alkaline PP3
Battery lifetime: Up to 2 years standby use, 5 days of continuous alarms.
Contact load relay outputs: max. 42V peak/ 60VDC and 1AAC or DC
Tinytag Plus 2:
TGP-4017 TGP-4020 TGP-4104 TGP-4204
TGP-4500 TGP-4505 TGP-4510 TGP-4520
Tinytag View 2:
TV-4020 TV-4050 TV-4076 TV-4104
TV-4204 TV-4500 TV-4501 TV-4505
TV-4506 TV-4510 TV-4701 TV-4804
CAB-0007-USB, USB interface cable for programming the delay time
SWCD-0040, Tinytag Explorer Sotware
SWPK-7-USB, Software and interface cable as a pack