
Pico Technology
All categories
Special items
Price range
€
€
Filter
- SKU:
- TA003ff
Small crocodile (gator) clip, black
- SKU:
- TA161ff
- Variations in:
-
- Colour
Flexible Back-Pinning Probe, black
- SKU:
- TA001ff
- Variations in:
-
- Colour
Multimeter probe
- SKU:
- MI106ff
- Variations in:
-
- Length
- Pico USB 2.0 cable
- Connectors: USB-A to USB-B
- 1.8m or 4.5m
- blue
- SKU:
- TA129
WPS500X Accessory: Universal Vakuum Adaptor
- SKU:
- TA142
Foster 2 Series quick coupler, female to 1/8 inch MPT male
- SKU:
- TA086
WPS500X Accessory: Bleed Hose for the Measuring Cell
- SKU:
- TA166
WPS500X Accessory: Large Air Hose Adaptor for Internal Ø10mm to Ø10, Ø6 or Ø4mm
- SKU:
- TA083
WPS500X Accessory: Gasoline Pressure Fuel Hose with Large Schrader Valve
- SKU:
- TA117
WPS500X Accessory: Gasoline Pressure Fuel Hose with Small Schrader Valve
- SKU:
- TA033
Connecting Cable with Grounding Clamp for COP Probes (TA033)
Connecting Cable with Grounding Clamp for COP Probes (TA033)
Accessory for COP probes.
Connecting cable with 2 rubber-insulated BNC plugs (male) for connecting the probe and the scope.
The grounding junction shall protect the scope against high voltage flashovers from the ignition system. The cable is equipped with a strain relief for its protection.
Cable length: 3m
Grounding cable length: 1.5m
Position of the grounding cable: 1.5m before each cable head.
Accessory for COP probes.
Connecting cable with 2 rubber-insulated BNC plugs (male) for connecting the probe and the scope.
The grounding junction shall protect the scope against high voltage flashovers from the ignition system. The cable is equipped with a strain relief for its protection.
Cable length: 3m
Grounding cable length: 1.5m
Position of the grounding cable: 1.5m before each cable head.
- SKU:
- TA285
- SKU:
- TA375
- SKU:
- TA213ff
- Variations in:
-
- Variant
Variants for short and deep reach
- SKU:
- TA217ff
- Variations in:
-
- length
Variants for short and deep reach
- SKU:
- TA219
WPS500X Accessory: Adaptor M16, Ford Triton, for Standard Compression Hose
- SKU:
- TA220
WPS500X Accessory: Adaptor M18, for Standard Compression Hose
- SKU:
- TA558ff
- Variations in:
-
- Colour
Flexible Back-Pinning Probe, black
- SKU:
- TA190
Automotive Breakout Lead for ACS Sensors, 2-Pin
- SKU:
- TA194ff
- Variations in:
-
- pin
Automotive Breakout Lead for Kostal Sensors, 2-Pin or 3-Pin
- SKU:
- TA330
Detector for the detection of the presence of the keyless entry carrier frequency in vehicles.
- SKU:
- PA108
- SKU:
- PA114