TGU-4550-SPK, Tinytag Ultra 2, 2-Channel Thermocouple Logger Starter Pack, with USB Cable and Software

Item number: TGU-4550-SPK

  • complete set of data logger, software and interface cable
  • self-contained temperature recorder with internal sensor
  • additional connection for external thermocouple sensor
  • internal measuring range: -40Cto +85C
  • external measuring range: -270Cto +1370C
  • supplied type K thermocouple: -100Cto +250C
  • resolution: 16 bit, 0.02C (internal)/ 0.01C (external) or better
  • ca. 28,000 reading capacity
  • splash-proof housing
  • user-settable alarms
  • Category: Gemini Tinytag Ultra 2

    185,64 €

    including19% VAT.

    Exp. shipping time: ca. 2 weeks

    : 7 workdays



    TGU-4550-SPK, Tinytag Ultra 2, 2-Channel Thermocouple Logger Starter Pack, with USB Cable and Software

    The Tinytag Ultra 2 Thermocouple data logger has got an internal temperature sensor and also uses an external thermocouple sensor for the cost-effective monitoring of temperature in a wide variety of applications.
    Thermocouples are temperature sensors that are popular because of their versatility and low cost.
    They typically have a fast response time, can be very small in size and are often cheap enough to be treated as disposable. Thermocouples are available for specific applications, as diverse as aluminium smelting, air temperature monitoring and food preparation. The Tinytag Ultra 2 Thermocouple logger supports four different types of thermocouple sensors and is compatible with both standard and miniature thermocouple plugs.

    • Supports type K, J, T & N thermocouples
    • Connects to standard and miniature thermocouple plugs
    • Burn out response
    • Automatic cold-junction compensation
    • Supplied with a type K thermocouple
    • 28,000 reading capacity
    • High accuracy and reading resolution
    • Fast data offload
    • Splashproof case
    • Low battery monitor
    • User-replaceable battery
    • USB or serial download cables
    • User-programmable alarms

    +Supports four types of thermocouple - the logger supports Type K, J, T and N thermocouples. Different thermocouple types work over different temperature ranges and are used in different applications.

    +Built-in temperature channel - the data logger has a built-in temperature channel that allows ambient temperature to be monitored at the same time as the thermocouple temperature. This channel can be turned off to increase the reading capacity of the external measurements if required.

    +Two connection types - the logger supports both standard and miniature thermocouple plugs.

    +Burnout response - the logger can be set to drive readings low or high in the event of a fault with the thermocouple, highlighting that there is a problem.

    +Cold junction compensation - the logger uses automatic cold junction compensation, ensuring the accuracy of the logger between -10 and +70C.

    +Type K thermocouple included - a Type K thermocouple, that can measure from -100 to +250C, is included with this logger.

    +Tinytag Explorer - this logger works with the popular Tinytag Explorer software, that allows users to easily combine data from different Tinytag data loggers and to export data to other programs. The software is also used to set the type of thermocouple being used.

    Technical Data:
    Thermocouple types & measuring ranges:
    • Type K (-270 to +1370C / -454 to 2498F)
    • Type J (-210 to +1200C / -346 to 2192F)
    • Type T (-270 to +400C / -454 to 752F)
    • Type N (-270 to +1300C / -454 to 2372F)
    Reading resolution: 0.01C
    Accuracy: Better than 1.0C across all thermocouple ranges when the logger is between -10 & +70C.
    Reading capacity: 28,000 readings (approximately)
    Memory type: Non Volatile
    Trigger start: Magnetic Switch
    Delayed Start: Relative / Absolute (up to 3650 days)
    Stop options: When full
    Never (overwrite oldest data)
    Reading types: Actual, Min, Max
    Logging interval: 1 sec to 10 days
    Alarms: 4 fully programmable; latchable
    Cold junction compensation: -10 to 70C
    Housing IP rating: IP51
    Working temperature range: -40 to +85C (-40 to +185F)
    Battery life: more than one year
    Housing dimensions: Height: 42mm / 2.83?
    Width: 60mm / 2.36?
    Depth: 33mm / 1.30?
    Weight: 65g / 2.29oz
    Internal temperature measurement:
    Measuring range: -40 to +85C (-40 to +185F)
    Internal sensor type: 10K NTC Thermistor
    Response time: 20 mins to 90% FSD in moving air
    Reading resolution: 0.02C or better
    Accuracy: Better than 0.5C

    Supplied Type K Thermocouple:
    Temperature range: -100 to +250C (-148 to 482F)
    Lead length: 1m / 39.37?
    The thermocouple data logger comes with a simple type K thermocouple, a CAB-0007-USB interface cable and the Tinytag Explorer software.
    Please contact us if you need a specific thermocouple for your application.

    Optional accessory (please order extra):
    ACS-6000 Trigger start magnet (only necessary, if you intend to use
    this kind of starting the logger runs)

    Ratings (0)

    Average product review

    Write your first review and help others with their purchase decision: