TGP-4020, Tinytag Plus 2, Temperature Data Logger for External Thermistor Sensor, IP68
Description
TGP-4020, Tinytag Plus 2, Temperature Data Logger for External Thermistor Sensor, IP68
Data loggers with external sensors can be used for monitoring temperatures in awkward to reach areas or applications where a fast response time is required. There is a variety of different probes available for this device, which can measure temperatures between -40°C and +125°C. Like the data loggers, also the probes are IP68 waterproof. The probes are not included with the loggers and need to be ordered extra. Suitable probes are listed below.The Tinytag Plus 2 data loggers are the "working horses" of the Tinytag logger range. They are equipped with rugged, waterproof (IP68) housings, which were designed for harsh and outdoor applications.
Popular Applications:
- Environmental monitoring
- Food processing and storage
- Pharmaceutical manufacture
- Logistics monitoring
- Museums and art galleries
Characteristics
- Self-contained Temperature recorder
- 32,000 reading capacity
- High accuracy and reading resolution
- Fast data offload
- Robust, waterproof case
- Low battery monitor
- User-replaceable battery
- User-settable alarms
- Optional audible alarm
Technical data:
Measuring range: -40°C to +125°C (-40°F to +257°F)
Resolution: 12 bit, 0.02°C or better
Sensor type: 10k NTC thermistor, external sensor (option)
Memory: 32,000 readings, non volatile
Trigger start: magnetic switch
Delayed start: relative / absolute (up to 45 days)
Stop Options: when full
after n Readings
never (overwrite oldest data)
Reading types: Actual, Min, Max
Logging interval: 1 sec to 10 days
Offload: While stopped or when logging in minutes mode
Alarms: 2 fully programmable; latchable
Housing protection: IP68 (waterproof, only with screw cap on the interface socket and
with screwed-on sensor connector)
Operation temperature range: -40°C to +85°C (-40°F to +185°F)
Housing sizes: 34 x 59 x 80mm³ (h x w x d)
Weight: 110g
Optional accessories (please order extra):
SWPK-7 USB-INT Starter pack: TINYTAG EXPLORER Software and
USB port cable with quick start guide in English, French, Italian, Spanish
and Swedish.
PB-5001-1M5/3M/5M: Standard thermistor probe with 1.5/3/5m cable or
PB-5002-1M5/3M/5M: Thermistor probe with short response time or
PB-5003-1M5/3M/5M: Thermistor surface probe
ACS-6000 Trigger start magnet (only necessary, if you intend to use this kind of starting the logger runs)
ACS-5001 external audible alarm box