HD 2303.0, Thermo- Anemometer

Item number: HD2303.0

  • Interchangeable optional probes
  • For measurements of air velocity, calculated volume flow and air temperature
  • Category: Weather & Climate

    411,74 €

    including 19% VAT.

    Exp. shipping time: ca. 2-3 weeks

    : 0 workdays



    HD 2303.0, Thermo- Anemometer

    The HD 2303,0 is designed for use in the fields of air conditioning, heating, ventilation and environmental comfort. It uses optional hotwire or vane probes to measure air speed, flow rate and temperature inside pipelines and vents. Temperature only is measured by immersion, penetration, air or contact probes. The temperature sensor used can be chosen from the Pt100, Pt1000. The probes are equipped with the SICRAM module, wit the factory calibration data stored inside.

    Technical data:

    Dimensions: 140 x 88 x 38mm³ (H x W x D)
    Housing material: ABS plastic
    Display: LCD,  2 x 4 1/2  digits plus symbols, visible area: 52 x 42mm²

    Operating conditions 
    Operating temperature: -5 to +50°C
    Storage temperature: -25 to +65°C
    Working relative humidity: 0-90% RH, non-condensing
    Protection rate: IP67

    Power supply
    Batteries: 3 x 1.5V type AA batteries
    Battery autonomy: 200h with 1,800mAh alkaline batteries
    Current drain with instrument off: <20µA
    Measuring units: °C, °F, m/s, km/h, ft/min, mph, knot, l/s, m³/min, m³/h, ft³/s, ft³/min

    Input module for the probes: 8- pole male DIN45326 connector

    Temperature measurement by instrument
    Measuring range Pt100: -200 to +650°C
    Measuring range Pt1000: -200 to +650°C
    Resolution: 0.1°C
    Accuracy: ±0.1°C

    Scope of delivery: Instrument HD-2303-0, 3 x 1.5V alkaline batteries, operating manual, case.
    Probes are not supplied with the instrument and must be ordered separately.

    Ratings (0)

    Average product review

    Write your first review and help others with their purchase decision: