Best sellers
TP-FBCL15, Vehicle Fuse Buddy Current Loop
TP-FBCL15, Vehicle Fuse Buddy Current Loop
TP-FBCL15, Vehicle Fuse Buddy Current Loop
SKU:
TP-FBCL15ff
  • Adaptor for current and voltage measurements at the location of the fuse
  • Adaptors for 4 common vehicle fuse types: MAXI, ATC, MINI and JCASE
  • Set of 4 or individually available
  • LED lights up if fuse is defective or missing

 

TiePie
TP-FBCL15, Vehicle Fuse Buddy Current Loop
from
25,11 € *
Go to item
Best sellers
5V Power Supply, Spare Accessory for Pico Oscilloscopes
5V Power Supply, Spare Accessory for Pico Oscilloscopes
SKU:
PS011
Replacement AC power adaptor for the PicoScope 3000A/B/D, 4444 and 5000A/B series oscilloscopes.
Pico Technology
5V Power Supply, Spare Accessory for Pico Oscilloscopes
36,89 € *
Go to item
  • : 11 - 13 Workdays  (DE - int. shipments may differ)
Best sellers
Carry Case for PicoScope 4444 and Accessories
Carry Case for PicoScope 4444 and Accessories
Carry Case for PicoScope 4444 and Accessories
SKU:
PA149
Foam inserts for oscilloscope and accessories
Pico Technology
Carry Case for PicoScope 4444 and Accessories
141,61 € *
Go to item
  • : 3 - 5 Workdays  (DE - int. shipments may differ)
Best sellers
LNA 10, Low Noise Differential Preamplifier for...
LNA 10, Low Noise Differential Preamplifier for...
LNA 10, Low Noise Differential Preamplifier for Oscilloscopes
SKU:
LNA10
Item weight:
0,67 kg
  • differential, potential-free BNC input
  • BNC output (100 Ohm)
  • amplifier gain selectable:  x10, x100, x1000
  • output low pass filter, tunable 1Hz to 1MHz
  • input offset adjustment: ±1mV
  • selectable input DC/AC coupling
    • PSE Priggen
    LNA 10, Low Noise Differential Preamplifier for Oscilloscopes
    734,23 € *
    Go to item
    • : 1 - 3 Workdays  (DE - int. shipments may differ)
    Best sellers
    PQ215, PCB Holding and Probe Positioning System, Kit 1
    PQ215, PCB Holding and Probe Positioning System, Kit 1
    SKU:
    PQ215
  • Add-on kit for PicoScope 6000E oscilloscopes
  • Magnetic probe holders with gooseneck
  • Kit for up to 4 probes
  • Magnetic holders for the PCB to be measured
  • Mirror-finished steel base plate
    • Pico Technology
    PQ215, PCB Holding and Probe Positioning System, Kit 1
    462,91 € *
    Go to item
    • : 4 - 6 Workdays  (DE - int. shipments may differ)
    Best sellers
    TESTEC TT-SX 200, Active Differential Scope Probe,...
    TESTEC TT-SX 200, Active Differential Scope Probe,...
    TESTEC TT-SX 200, Active Differential Scope Probe, 200MHz, x10, 50V
    SKU:
    TT-SX 200
    • Attenuation ratio: 1:10
    • Max. 60V input voltage
    • 200MHz bandwidth
    • Offset setting function
    • Overrange alarm
    • High accuracy (±2 %)
    • Power supply via USB or USB mains adaptor
    Testec
    TESTEC TT-SX 200, Active Differential Scope Probe, 200MHz, x10, 50V
    1.416,10 € *
    Go to item
    • : 6 - 8 Workdays  (DE - int. shipments may differ)
    Best sellers
    TP-BP85, Back Probes without Collars
    TP-BP85, Back Probes without Collars
    TP-BP85, Back Probes without Collars
    SKU:
    TP-BP85ff
    Variations in:
    • Variants:
    • Measurement accessories
    • Probe length: 45mm
    • Tip diameter: 0.6mm
    • Tip length: 18mm
    • 4mm banana sockets
    TiePie
    TP-BP85, Back Probes without Collars
    from
    10,59 € *
    Go to item
    Best sellers
    TP-DB9-BNC-30, TiePie Cable for Scope Probe Compensation
    TP-DB9-BNC-30, TiePie Cable for Scope Probe Compensation
    TP-DB9-BNC-30, TiePie Cable for Scope Probe Compensation
    SKU:
    TP-DB9-BNC-30

    •Cable delivers square wave signal for divider probe adjustment

    •Cable only suitable for certain TiePie devices

    •Connection to the oscilloscope's extension socket

    TiePie
    TP-DB9-BNC-30, TiePie Cable for Scope Probe Compensation
    21,30 € *
    Go to item
    • : 1 - 3 Workdays  (DE - int. shipments may differ)
    Best sellers
    D9 Single BNC Adaptor for PicoScope 4444
    D9 Single BNC Adaptor for PicoScope 4444
    D9 Single BNC Adaptor for PicoScope 4444
    SKU:
    TA271
  • Accessory for the PicoScope 4444 differential oscilloscope
  • D9 connector to single BNC cable socket
  • enables the connection of common scope probes with BNC plug
  • allows the PicoScope 4444 to be used as a standard oscilloscope
  • allows to have a mix of single ended and differential signals
  • allows the use of the AC Flex current probes TA325 and TA326
    • Pico Technology
    D9 Single BNC Adaptor for PicoScope 4444
    23,80 € *
    Go to item
    • : 11 - 13 Workdays  (DE - int. shipments may differ)
    Best sellers
    Adapter Cable, BNC to 4mm Banana Plug
    Adapter Cable, BNC to 4mm Banana Plug
    SKU:
    MI029
    Adapter Cable, BNC to 4mm Banana Plug
    PSE Priggen
    Adapter Cable, BNC to 4mm Banana Plug
    20,23 € *
    Go to item
    • : 1 - 3 Workdays  (DE - int. shipments may differ)
    Best sellers
    Adapter Cable, BNC to Alligator Clamps MI031
    Adapter Cable, BNC to Alligator Clamps MI031
    SKU:
    MI031
    Adapter Cable, BNC to Alligator Clamps
    PSE Priggen
    Adapter Cable, BNC to Alligator Clamps MI031
    11,90 € *
    Go to item
    • : 1 - 3 Workdays  (DE - int. shipments may differ)
    Best sellers
    Adapter BNC Plug to 4mm Sockets, Shrouded, Insulated MI078
    Adapter BNC Plug to 4mm Sockets, Shrouded, Insulated MI078
    SKU:
    MI078
    Shipping weight:
    0,04 kg
    Item weight:
    0,03 kg
    Adapter BNC Connector to 4mm Sockets
    PSE Priggen
    Adapter BNC Plug to 4mm Sockets, Shrouded, Insulated MI078
    26,18 € *
    Go to item
    • : 1 - 3 Workdays  (DE - int. shipments may differ)
    Sale 10%
    Attenuator 10:1 with High Bandwidth
    Attenuator 10:1 with High Bandwidth
    SKU:
    TA197
  • Attenuator 10:1
  • High Bandwidth
  • high input impedance
  • BNC plug/socket
  • for voltage up to 400V
    • Pico Technology
    Attenuator 10:1 with High Bandwidth
    65,45 € *
    Go to item
    • : 1 - 3 Workdays  (DE - int. shipments may differ)
    Best sellers
    TA386, Passive 200 MHz Voltage Divider Scope Probe, 1:1/10:1
    TA386, Passive 200 MHz Voltage Divider Scope Probe, 1:1/10:1
    SKU:
    TA386
  • Voltage divider scope probe
  • 600V
  • 200MHz
  • x1/x10
    • Pico Technology
    TA386, Passive 200 MHz Voltage Divider Scope Probe, 1:1/10:1
    49,98 € *
    Go to item
    • : 8 - 10 Workdays  (DE - int. shipments may differ)
    Best sellers
    TA138, Current Clamp 200A AC, Banana Plugs
    TA138, Current Clamp 200A AC, Banana Plugs
    SKU:
    TA138
  • with banana plugs to be connected to PicoLog CM3 or a multimeter
  • provides 1mV/A
  • clamp opening: 16mm
    • Pico Technology
    TA138, Current Clamp 200A AC, Banana Plugs
    80,92 € *
    Go to item
    • : 11 - 13 Workdays  (DE - int. shipments may differ)
    Best sellers
    TA136, Logic Analyser Cable, Accessory for all PicoScope...
    TA136, Logic Analyser Cable, Accessory for all PicoScope MSO Models
    SKU:
    TA136
    TA136, Logic Analyser Cable, Accessory for all PicoScope MSO Models
    Pico Technology
    TA136, Logic Analyser Cable, Accessory for all PicoScope MSO Models
    23,80 € *
    Go to item
    • : 11 - 13 Workdays  (DE - int. shipments may differ)
    Best sellers
    USB 3.0 Cable, 1.8m, blue
    USB 3.0 Cable, 1.8m, blue
    SKU:
    TA155
    Pico USB 3.0 Cable, 1.8m, blue
    Pico Technology
    USB 3.0 Cable, 1.8m, blue
    20,23 € *
    Go to item
    • : 1 - 3 Workdays  (DE - int. shipments may differ)
    Best sellers
    USB 2.0- Kabel 1,2m
    USB 2.0- Kabel 1,2m
    SKU:
    TA207
  • high-quality cable with minimal lead resistance
  • reduces voltage drop and noise interferences
  • USB cable with type A plug and type B jack 

    •  

    Pico Technology
    USB 2.0- Kabel 1,2m
    13,09 € *
    Go to item
    • : 1 - 3 Workdays  (DE - int. shipments may differ)
    Sale 14%
    S- Hook
    S- Hook
    SKU:
    MI168
    S- Hook for Hanging the Measuring Leads
    Pico Technology
    S- Hook
    3,57 € *
    Go to item
    • : 1 - 3 Workdays  (DE - int. shipments may differ)
    Best sellers
    TA139, Test Clip Set
    TA139, Test Clip Set
    SKU:
    TA139
    TA139, Test Clip Set for Logic Analyser Cable
    Pico Technology
    TA139, Test Clip Set
    39,27 € *
    Go to item
    • : 1 - 3 Workdays  (DE - int. shipments may differ)

    High-Quality Adapters and Cables for Oscilloscope Accessories

    The quality of adapters and cables plays a crucial role in signal transmission and accuracy. Our range of oscilloscope accessories includes a variety of robust and reliable adapters and cables. Whether you need SMA, BNC, or N adapters, you will find the right connections for your measuring devices with us. Our highly flexible coaxial cables ensure minimal signal loss and maximum precision.

    Protective Hard Cases for Your Oscilloscope Accessories

    Safe transport and storage of your oscilloscope accessories are essential to maintain the longevity and functionality of your devices. Our hard cases provide optimal protection for your sensitive measuring instruments. Specifically designed for various models and accessories, these cases not only protect against physical damage but also offer easy handling and organization of your equipment.