350 MHz Passive Scope Probe, x10

Item number: TA150

  • Passive divider oscilloscope probe
  • 300V
  • 350 MHz
  • x10
  • Compensated for the PicoScope 6402A/BC/D and 6403A/B/C/D
  • Category: Oscilloscope Accessories

    213,01 €

    including19% VAT.

    Exp. shipping time: ca. 1 week

    : 7 workdays



    350 MHz Passive Scope Probe, x10, Compensated for the PicoScope 6402A/B/C/D and 6403A/B/C/D

    Passive oscilloscope probe, compensated to ensure optimum performance when used with the PicoScope 6000 Series, these passive scope probes features x10 attenuation and a maximum working voltage of 300 volts RMS. The compact design of this high?performance probe means there is only 2.5mm housing diameter at the probe tip ? compared to the conventional 5mm housing ? making it easier for you to see the device under test, and making it ideal for measurements of SMT components. Technical data:
    Attenuation: 10:1
    Resistance at probe tip: 10 MOhm
    Capacitance at probe tip: 9.5 pF
    Scope input impedance: 1 MOhm
    Compatibility: PicoScope 6402A/B/C/D and
    6403 A/B/C/D
    Bandwidth (3 dB): 350 MHz
    Maximum working voltage: 300 V RMS CATII
    Risetime (10% to 90%): 1 ns
    Compensation range: 10 to 25 pF
    Safety standard: IEC/EN 61010-031
    Cable length: 1.3 m (approx 4 ft 3 in)

    Frequency range: 350 MHz
    Devider ratio: x10
    Input voltage: 300V

    Ratings (0)

    Average product review

    Write your first review and help others with their purchase decision: