WT1000-mA, Wind Speed Transmitter, 0-35m/s, 4-20mA Output, 24VDC/AC, with Heating
The wind transmitter is used to detect the wind speed. The evaluation unit is integrated into the wind sensor.
Wind transmitters are used for the control in home automation and building automation as well as for weather stations.
The measured wind speed in m/s is output as an analog signal 4-20 mA.
The integrated wind transmitter heating ensures a safe operation in winter.
With stainless steel ball bearings. Screw-on shells.
Measuring range: 0-35m/s
Start-up speed: 1m/s
Max. wind load: 50m/s
Output signal: 4-20 mA, 4-wire
Supply voltage: 24VDC/AC
Cable: 10m, 4x0.5mm˛
Overall height: 190mm
Mast bracket: up to 50mm diameter
Anemometer diameter: 160mm
Housing protection: IP65
There is also a version with 0-10V output available upon request, instead of the 4-20mA output.