V4A10, HF Shielding Gauze, V4A Stainless Steel, Mesh Width: 1.0mm, 40dB

Item number: V4A10

  • shielding attenuation: 40dB at 1GHz; two-layer: 60dB
  • finely woven, noncorrosive stainless-steel gauze
  • web width: 90cm
  • mesh width: 1.0mm
  • colour: silver
  • Category: HF Shielding Materials


    13,22 €

    including 19% VAT.

    Exp. shipping time: ca. 1 week

    : 7 workdays

    sq m


    Description

    V4A10, HF Shielding Gauze, V4A Stainless Steel, Mesh Width: 1.0mm, 40dB


    V4A10 (former: HEG10) is a finely woven, non-corrosive stainless steel gauze for the protection against high-frequency radiation (HF) and low-frequency electric fields (LF).

    Typical application for the interior and exterior under-plaster in upgraded insulations, in roof areas, at drywall constructions, as flyscreen, for loosely laid, etc.

    Technical data:

    • Width: 90cm.
    • Length: 25 m roll / by the meter.
    • Attenuation: 40 dB at 1 GHz
    • Mesh width: 1.0 mm;
    • wire diameter: 0.16 mm
    • material thickness: 0.32 mm.
    • Weight: 260 g/m˛
    • Colour: Silver.
    • Fire-proof material, A1 according DIN 4102:1994
    • Surface conductivity: 0.1 Ohm (square resistance)

    Order quantity:
    In measures of 1.0 running meters. This product is cut off according to your specifications, return or revocation are not possible.

    Shielding attenuation:
    All shielding attenuation values are valid at 1GHz. Measurement according to ASTM D4935-10  /IEEE Std 299-2006 / IEEEE Std 1128-1998 / ASTM A698/A698M-07.

    Grounding:
    Due to the highly conductive surface this material can be contacted and grounded easy to shield low frequency (LF) electric fields. please find corresponding components under the category Grounding Accessories.  A recommendation here is difficult because this depends on the application.

    Application:
    Floor, Ceiling, Wall interior, Wall exterior

    Field type:
    LF (low frequency alternating electrical fields), HF (high frequency electromagnetic fields)

    Processing:
    In case processing the V4A10 under plaster you should work with a preferably fine and organic filler. Under the floor covering (laminate, parquet, PVC coating, etc.) the HEG10 is being fixed with the adhesive used for the floor covering. For drywall construction and in roof area the mesh elements can be bolt or stapled together.
    The rule is: Always overlap the single elements at least 5 cm. For grounding use the perforated stainless steel tape ELB by screwing it right across the elements into the surface. 


    Please note: The price is valid per m˛ (square metre), not per running metre!

    Ratings (0)

    Average product review

    Write your first review and help others with their purchase decision: