TR-3600, Ultra Radio Temperature/Humidity Data Logger with Built-In- Sensors

SKU: TR-3600
Category: Air Humidity
Manufacturers: Tinytag / Gemini

replacement for Tinytag Ultra Radio TR-3500

measuring ranges: -20 to +55°C / 0 to 95% RH

internal sensors

200m typical range (line of sight)

high accuracy and reading resolution

12 month battery life

low battery monitor

user-replaceable battery

392,70 €

incl. 19% VAT

Exp. shipping time: ca. 2-3 weeks
: 7 Workdays (Other countries)

pc.

Description
Reviews

TR-3600, Ultra Radio Temperature/Humidity Data Logger with Built-In- Sensors

The TR-3500 monitors temperatures from -20 to +55°C and air humidity from 0 to 95% RH using built-in sensors. The logger's design makes it ideal for discreet indoor monitoring in a variety of buildings. This logger is a component part of the Tinytag Radio data logging system, which automatically sends data from multiple loggers via a receiver for viewing on a PC.
This logger is part of a system that requires a receiver and Tinytag Explorer software (ACSR-3030-PK) as optional accessories.

The logger can also be powered from the mains using an optional plug-in power supply (ACS-0005).
If the power supply is interrupted, the logger’s batteries will power the logger and continue recording until the supply is restored.

Please note: this product is only for sale in the EU.

Please note: This article is only one component of the Tinytag Radio Logger System.
For proper operation minimum one radio data logger and one Tinytag radio receiver with accompanying software are necessary!

Features:

Temperature and relative humidity monitoring
Robust data network
Easy to install
Alarm e-mails
200m typical range (line of sight)
High accuracy and reading resolution
12 month battery life
Low battery monitor
User-replaceable battery

Popular applications:
Used for temperature and relative humidity monitoring in:

Art galleries and museums
Schools and educational establishments
Offices and workplaces
Light industry and warehouses

Technical data:

Temperature:
Reading range: -20°C to +55°C
Response time: 5 mins to 90% FSD (in moving air)
Logger resolution: 0.01°C or better
Sensor type: 10K NTC thermistor (integral)

Relative humidity:
Reading range: 0 to 95% RH
Accuracy: ±3.0% RH
Reading resolution: 0.05% RH
Response time: 90 seconds to 90% FSD
Stability: better than 1% per year (typical)

Radio frequency: 869.88MHz (EU version, AUS versions upon request )
Radio power: <5mW
Radio range: 200m, typical (line of sight).
Radio licence: no licence required (SRD)
Offline memory capacity: 2 weeks typical, at a 10 minute logging interval
Memory type: non volatile
Logging interval: 2 minutes to 10 days
Alarms: 2 programmable latching alarms (upper and lower) per channel
Alarm delay: 1 second to 10 days
Low battery monitor: software warning
Battery type: Duracell Procell MN1500 LR6 AA 1.5V (supplied)
Battery life: typically 12 months
IP Rating: IP20
Operational Range: -20°C to +55°C
Case Dimensions: 121 x 79 x 24mm³ (L x W x D, excluding antenna)
Weight: 180g

Optional accessories:
ACS-0005              Power supply for Ultra Radio dataloggers
ACSR-3030-PK    Pack: Ultra Radio receiver, software, 5m USB cable, power supply
CAL-9003             Initial temperature & humidity calibration (dual channel)
CAL-9004             Service calibration temperature & humidity (dual channel)

There are no reviews yet.