TGPR-0804, Tinytag Plus Re-Ed, Current Input Logger with Rugged IP68 Housing
Description
TGPR-0804, Tinytag Plus Re-Ed, Current Input Logger with Rugged IP68 Housing
A current input data logger that is housed in a robust, waterproof (IP68) rated case.
This logger can measure 0-20mA currents and can be connected to many industry standard devices with 4-20mA outputs. This allows the recording of a large range of process parameters.
The data logger software "Tinytag Explorer" and the interface cable are not supplied and need to be ordered extra.
Using the Re-Educator software, which is supplied on the Tinytag Explorer CD, or can be downloaded free of charge from the Tinytag web site, the unit can be configured to display recorded data in the appropriate engineering units for the application it is being used in.
Popular Applications:
- Customised data logging:
- CO2
- Pressure
- Flow Rate
- Light
- Power (with a current clamp)
Features:
- Current input data logger
- 64,000 reading capacity
- User-programmable logging interval
- 2 user-programmable alarms
- Delayed start options
- Rugged, waterproof housing
- 3 stop options
- User-replaceable battery
- Supplied with current/millivolt/counter signal input cable
Technical data:
Measuring range: 0 to 20mA DC
Maximum input current: 50mA
Input impedance: 10Ohm
Resolution: 8 Bit, 0.08mA
Accuracy: ±0.1mA ±0.6% of reading
Memory: 64,000 readings, non-volatile
Trigger Start: Magnetic Switch
Delayed Start: Relative / Absolute (up to 45 days)
Stop Options: When full
After n Readings
Never (overwrite oldest data)
Logging Interval: 1 sec to 10 days
Offload: While stopped or when logging in minutes mode
Alarms 2 fully programmable; latchable
Housing protection: IP68, (waterproof, only with screw cap on the interface socket and
with screwed on sensor connector.)
Operational Range: -40°C to +85°C (-40°F to +185°F)
Housing sizes: 34 x 59 x 80mm³
Weight: 110g
Optional accessories (please order extra):
SWPK-7 USB-INT Starter pack: TINYTAG EXPLORER Software and
USB port cable with quick start guide in English, French, Italian, Spanish and Swedish.
CAB-3246 Tinytag current/millivolt/counter signal input cable (for spare use)
ACS-9700 2-pin connector
ACS-6000 Trigger start magnet