TGP-4901, Tinytag Plus 2, Pulse Count Datalogger, max. 14,000 Pulses per Logging Interval, IP68

Item number: TGP-4901

  • battery-powered pulse counting recorder
  • measuring range: 0-14,000 pulses per logging interval
  • max. frequency: 50 pulses/second
  • 32,000 reading capacity
  • robust, waterproof case
  • user-settable alarms
  • Category: Weather & Climate


    149,94 €

    including 19% VAT.

    Exp. shipping time: ca. 2 weeks

    : 7 workdays

    pc.


    Description

    TGP-4901, Tinytag Plus 2, Pulse Count Datalogger, max. 14,000 Pulses per Logging Interval, IP68


    This datalogger counts pulses recorde in the respective logging interval with a max. frequency of 50 pulses/s.
    An input signal cable is included for connection to various third-party sensors, meters.
    In case that a sensor is already equipped with a connected cable, suitable optional plugs are available for connection to the datalogger.

    Like all "Plus 2" dataloggers, the TGP-4704 is waterproof with IP68 protectionand can therefore be used outdoors.

    The datalogger stores the measured values in pulse count units. If the user requires other physical units e.g. for flow rate, utility meters monitoring, rainfall, object or people counting etc, which correspond to the sensors used, this is possible as an option upon surcharge when ordering the datalogger. (Because of this "scaling" please contact PSE before ordering.)

    Popular Applications:
    • Third-party sensors with pulse outputs
    • Flow rate
    • Utility meter monitoring
    • Rainfall
    • Object counting
    • Number of revolutions
    • Battery charging/discharging
    • People counting
    Characteristics
    • Battery powered pulse counting recorder
    • Max. 14,000 pulses per logging interval
    • 32,000 reading capacity
    • Digital input or volt-free contact input
    • Robust, waterproof case
    • Low battery monitor
    • User-replaceable battery
    • User-settable alarms
    • Optional audible alarm


    Technical data:
    Measuring range: 0-14,000 pulses per logging interval
    Max. frequency: 50 pulses/s
    Input type: digital or volt-free contact
    Digital input:
         LOW level: -0.3V to +0.3V
         HIGH level: 3V to 5V
         Min. pulse width: 150µs
         Min pulse separation: 10ms
         Edge detection: HIGH/LOW transition
    Contact input:
         Type: normally open (with minimum de-bouncing)
         Min. closed time: 150µs
         Min. open time: 10ms
         Edge detection: Open to closed
    Memory:  32,000 readings, non volatile
    Trigger start: magnetic switch
    Delayed start: relative / absolute (up to 45 days)
    Stop Options: when full
                              after n Readings
                              never (overwrite oldest data)
    Reading types: Actual, Min, Max
    Logging interval: 1 sec to 10 days
    Offload: While stopped or when logging in minutes mode
    Alarms: 2 fully programmable; latchable
    Housing protection: IP68 (waterproof, only with the screw cap on the interface socket)
    Operation temperature range: -40°C to +85°C (-40°F to +185°F)
    Housing sizes: 80 x 59 x 34mm³ (h x w x d)
    Weight: 110g


    Optional accessories (please order extra):
    SWPK-7 USB-INT Starter pack: TINYTAG EXPLORER Software and
                                         USB port cable with quick start guide in English, French, Italian, Spanish
                                         and Swedish.
    ACS-6000                   Trigger start magnet (only necessary, if you intend to use this kind of starting the logger runs)
    ACS-5001                   external audible alarm box

    Ratings (0)

    Average product review

    Write your first review and help others with their purchase decision: