TE-4600, Tinytag Plus LAN, Ethernet- Temperature/Humidity Logger with one ext. Probe

Item number: TE-4600

  • Replacement for Tinytag Plus LAN TE-4500
  • Ethernet connectivity (communicates across a LAN)
  • Temperature/relative humidity monitoring
  • Supplied with one external temperature/humidity probe
  • User programmable audible & visual alarm
  • Alarm output, to trigger external device
  • Power over Ethernet (PoE) with battery back-up
  • Waterproof case
  • Tinytag Connect compatible
  • Category: Gemini Tinytag Plus LAN

    606,90 €

    including 19% VAT.

    Exp. shipping time: ca. 2-3 weeks

    : 0 workdays



    TE-4600, Tinytag Plus LAN, Ethernet- Temperature/Humidity Logger with one ext. Probe

    This data logger monitors temperatures from -25°C to +85°C, and 0 to 100% RH using the accompanying temperature/RH probe.The coated RH sensor offers good resistance to moisture and condensation. It plugs directly into a network point and sends data via the LAN for immediate viewing in the Tinytag Explorer Connect software.

    The logger records data at user-defined logging intervals and can be programmed to give alarm alerts, both audible and visual, in the event of a problem.
    The logger also has an alarm output that changes state when alarms are active.

    The logger is supplied with a PoE injector, an RJ45 shroud and a detailed manual. 

    LAN loggers can be mixed and matched with Tinytag Plus Radio and Ultra Radio data loggers within an application to meet particular site layout and infrastructure requirements.

    A PBRF-8002 temperature and relative humidity probe and CAB-0034 sensor extension cable are provided with the logger.

    The logger comes without 2 LAN cables for connection to the PoE injector. These need to be ordered separately.

    Technical data:

    Reading range: -25°C to +85°C
    Sensor type: thermistor (external probe)
    Response time: 5 mins to 90% of the reading change (in moving air)
    Logger resolution: 0.01°C or better
    Logger accuracy: ca. 0.5°C (0 to +50°C)

    Relative humidity:
    Reading range: 0 to 100% RH
    Accuracy: ±3.0% RH
    Reading resolution: 0.04% RH
    Response time: 90 seconds to 90% of the reading change
    Stability: Better than 1% per year (typical)

    Logging intervals: 2 minutes to 10 days
    Default logging interval: 10 minutes
    Logging/off-line capacity: 361 days typical at a 10 minute logging interval
    Alarms: 2 fully programmable, latching alarms
    Alarm delay: 1 second to 10 days
    Alarm indicators: visual (LED) & audible (sounder)
    Alarm output: 3-pin, powered output that changes state when alarms are active
    IP rating: IP67 (waterproof with waterproof shroud on the Ethernet connection fitted)
    Operational range: -20°C to +55°C
    Case dimensions (H x W x D): 161 x 113 x 62mm³
    Weight: g

    IP rating: IP20
    Operational range: -25°C to +85°C
    Dimensions:  61mm x Ø16mm
    Extension cable length: 1.5m
    Weight: 10g

    Optional accessories:
    When used as a standalone device, a copy of the following software is required:
    SWCD-0040 Tinytag Explorer

    When used as a part of a Tinytag Connect system, a copy of the following software is required:
    SWCD-0080 Tinytag Explorer Connect

    CAB-0041 Alarm output cable for connection to an external alarm device

    Ratings (0)

    Average product review

    Write your first review and help others with their purchase decision: