S4AO, RS-485 MODBUS Module with 4 Analogue Outputs 4 x 0-10V/ 20-40VAC, 20-60VDC

SKU: S4AO-2200E0
Category: RS-485/MODBUS Components
Manufacturers: LUMEL

Conversion of RS-485 MODBUS data into standard signals in 4 channels (current 0/4...20 mA or voltage 0...10 V).

Possibility of connection via internal RS-485 port in order to increase no of analog outputs in other devices.

Two independent communication ports (possibility to work as Master/Slave)

Master MODBUS function dedicated to read out data from other RS-485 devices and to scale analog value

Slave MODBUS function to set the signal on analog outputs

Outputs working time counter

DIN rail mounting

Galvanic separation between 2 groups of outputs

Possibility of configuration through USB without power supply

3 years warranty

Analogue Outputs/Supply Voltage

220,32 €

incl. 19% VAT

: 0 Workdays (Other countries)

pc.

Description
Reviews

S4AO, RS-485 MODBUS Module with 4 Analogue Outputs

The 4-channel analogue outputs module S4AO from LUMEL is designed to convert numerical data to standard (voltage or current) signals, by means of the MODBUS protocol.
The output signals are divided into 2 sets of 2 outputs, which are isolated between themselves.
RS-485 and USB ports are isolated from outputs signals and the supply.
The module setting can be done through USB or one of both RS-485 interfaces using the free eCon program.
One RS-485 interface can be connected via the connection terminals. For the second interface the connections are located on both sides of the module behind plastic covers which need to be removed for their access. The lateral interface offers the advantage that other modules which also have a lateral interface can be easily connected to each other using an optional inter-modular connector.

The S4AO module performs the following functions:

analogue output (current and / or voltage, according to the ordering code)
2 independent interfaces RS-485 MODBUS. Each can be configured as Slave or Master, which set to output a signal proportionally to a value read from another Slave device
short-circuit detection on voltage outputs
timer counting time work over an upper threshold and beneath a lower threshold

Technical data:
Analogue outputs (please select when ordering!):
    4 x current standard signal: 0/4-20mA
    4 x voltage standard signal: 0-10V
    2 x current (0/4-20mA) and 2 x voltage (0-10V) standard signal
Digital interfaces: 2 x RS-485, MODBUS RTU
Supply voltage: 85-253VAC/90-300VDC or 20-40VAC/20-60VDC (please select when ordering!)
Dimensions: 53 x 110 x 60.5mm³
Weight: 200g
Housing protection: IP50 (front); IP00 (terminal)
Mounting: DIN rail
Warranty: 3 years

There are no reviews yet.