Power supply, encapsulated, IP67 with M12 Socket, 24VDC, 60/100/150W
For the 24VDC power supply of the following workplace and machine lamps:
- LENSLED
- UNILED
- TUBELED
- SPOTLED
- FLEXLED
- MIDILED
- LEANLED
The IP67 power supplies for surface mounting are encapsulated and are equipped with reinforced input and output cables, the input with open ends and the output with an M12 cable socket.
The power supplies are available in 3 versions (please select when ordering):
+ max. 60W power
+ max. 100W power
+ max. 150W power
Technical data:
Input voltage: 90 - 305VAC
Input frequency: 47 - 63Hz
Nominal output voltage: 24VDC
Max. output power:
Output current:
Dimensions:
Weight:
Power factor at full load :
Protection class: IP67
Ambient temperature range: -40 to +80°C
Overtemperature protection: 95°C ±10°C
Operation air humidity: 20 - 95%
Cable length: Input: approx. 300mm with open ends; output approx. 300mm with M12 cable socket, A-coded
Protections: Short circuit protection, overload protection, over voltage protection, over temperature protection
Labels: Active PFC, IP65, IP67, ICC, CB, CE, UKCA, UL8750 Type HL
Please note: This power supply is not suitable for JUWELLED and MECHALED lamps.
For the connection of several lamps to a suitable powers supply (take care for the max. power!) M12 T-distributors, M12 sensor-actor boxes and connection cables with M12 connectors are available.
