PeakTech 6135, 100 W Switching Mode Power Supply, 1.0-36V DC / 3A

Item number: P6135

  • Voltage/Current: 1.0-36V DC / 3A
  • illuminated LCD indications of A, V, output ON-OFF, CC & CV
  • 4 digit, 13 mm displays of Volt and Amp meters
  • voltage and current controls
  • output over voltage protection, short circuit, overload and over temperature protections
  • Category: Lab Power Supplies


    145,30 €

    including19% VAT.

    Exp. shipping time: ca. 1 week

    : 7 workdays

    pc.


    Description

    PeakTech 6135, 100 W Switching Mode Power Supply, 1.0-36V DC / 3A

    100 W switching mode power supply with current limiting control, are designed with the objectives of high accuracy, compactness and easy portability. The large and illuminated LCD display provides clear and sharp readings even under dim light. Output over voltage protection ensures a better and tighter protection to voltage sensitive loads. Excellent line and load regulations, high efficiency, low ripple & noise that are typical of advanced switching mode power supply.

    The device is equipped with a German standard mains plug.

    • illuminated LCD indications of A, V, output ON-OFF, CC & CV
    • 4 digit, 13 mm displays of Volt and Amp meters
    • voltage and current controls
    • output over voltage protection, short circuit, overload and over temperature protections
    • Safety: EN 61010-1, EMC: EN-55011
    • Accessories: power cable, test lead and manual

    Technical data:

    output voltage adjustable range: 1.0 - 36 V
    output current adjustable range: 0 - 3 A

    voltage regulation

    load from 10 % to 100 % variation: 70 mV
    line from 180 to 264 V AC variation: 20 mV
    ripple & noise in r.m.s.: 5 mV
    ripple & noise (peak to peak): 30 mV

    current regulation

    load from 10 % to 100 % variation: 20 mA
    line from 180 to 264 V AC variation: 20 mA
    ripple & noise (peak to peak): 20 mA
    switching operation frequency: 80 - 120 kHz
    power factor: 0,68
    efficiency at maximum power: 84 %
    voltmeter accuracy: 1,0 % + 3 dgt.
    ampermeter accuracy: 1,0 % + 3 dgt.
    LCD-display: CC, CV, A, V, output ON-OFF
    operating voltage: 200 ~ 240 V AC; 50/60 Hz
    dimensions (WxHxD): 70 x 150 x 250 mm
    weight: 2 kg

    Picture is similar to the PeakTech 6135.

    Ratings (0)

    Average product review

    Write your first review and help others with their purchase decision: