PeakTech 3450, Digital Multimeter with Thermal Imager, Data Logger, Bluetooth 4.0

Item number: P3450

  • True RMS multimeter with 6,000 counts
  • Data logger and trend display
  • 80 x 80 pixels thermal imaging camera
  • PC software for thermal image analysis and datalogger
  • 7cm (2.8") multi-line TFT display
  • Graphical user interface with menu control
  • Data logger function with graph
  • Bluetooth interface for data transfer to a mobile phone
  • Lithium-polymer battery with external charger
  • IP65 dust-proof and water-resistant
  • Safety: EN 61010-1; CAT III 1000 V / CAT IV 600 V

Category: Infrared Thermal Imaging Cameras


831,81 €

including19% VAT.

: 0 workdays

pc.


Description

PeakTech 3450, Digital Multimeter with Thermal Imager, Data Logger, Bluetooth 4.0

This new combination of state-of-the-art TrueRMS graphics multimeter and quick-response thermal imaging camera ensures the professional use in all areas of electrical engineering.

You can check the heat development of electrical connections and loosening points in circuits, control cabinets or wiring of systems and reliably find faulty connections with high contact resistances.

Use the extensive multimeter functions to make precise measurements you can automatically log, save via screenshot or record and process via app for Android or iOS mobile devices.

Switch the colour TFT display at the push of a button between the multimeter-only display or a combined multimeter / thermal image display and use the graphical menu navigation to make all the settings to your liking.

In multimeter function , multi-line displays are available for currently measured values, maximum / minimum or relative value measurements.

The integrated thermal imager provides a very fast refresh rate of 50Hz for a smooth display in troubleshooting and uses a thermal resolution of 80 x 80 pixels. You can use the graphical menu to switch between different colour palettes (Gray & Inv. / Iron / Rainbow etc.), set the emission factor or activate the laser pointer for targeting.

Accessories: Carrying case, Test leads, SD-flash, K-type thermocouple, 7.4V Li-Ion battery, Battery charger, Magnet holding kit and manual
Technical data:
DCV: 600mV / 6 / 60 / 600 / 1000V 0.09% +5 dgt.
ACV: 600mV / 6 / 60 / 600 / 1000V 0.8% +5 dgt.
Frequency range: 50 Hz … 1kHz
ACV+DCV: 6 / 60 / 600 / 1000V 2.4% +20 dgt.
Frequency range: 50 Hz … 1 kHz
DCA: 600 / 6000A / 60 / 600mA / 10A 0.9% +5 dgt.
ACA: 600 / 6000A / 60 / 600mA / 10A 1.2% +5 dtg.
Frequency range: 50Hz … 1kHz
Ohm: 600Ohm / 6 / 60 / 600 kOhm / 6 / 60 MOhm 0.5% +10 dgt.
Capacitance: 60 / 600nF / 6 / 60 / 600 / 6000F 1.2% +8 dgt.
Frequency: 60 / 600Hz / 6 / 60 / 600kHz / 6 /10MHz 0.09% +5 dgt.
Temperature (K type): -40.0C … +1000C 1.5% + 3C
Thermal Camera:
Resolution: 80 x 80 px.
Temperature range: -20C ... 260C
FOV / min. focus: 21 x 21 / 0.5m
Sensitivity / NETD: 0.1C / 100mK
General:
Operating voltage: 7.4 V / 1500mAh Li
Charger: 100/240 VAC, 50/60 Hz - 12VDC / 2A
Dimensions (WxHxD): 75 x 195 x 55mm
Weight: ca. 550g

Ratings (0)

Average product review

Write your first review and help others with their purchase decision: